• 한국통신학회논문지
• /
• 제22권10호
• /
• pp.2348-2356
• /
• 1997

본 고에서는 ATM망에 연결되는 단말기(TE)가 국제 기관(ITU, ISO 등)에서 제정한 표준대로 구현되어 의도된 대로 기능을 수행하는지 확인하기 위한 적합성 시험 방법 및 결과 분석 방법에 대해서 기술하였다. 적합성 시험에 관한 설명을 하기 위해서 선정한 ATM AAL 프로토콜(SSCOP)애 대한 기본 표준은 ITU-T Q.2110 과 ATM Forum UNI 3.1에 각각 규정되어 있으며, 이에 대한 시험 표준은 ATM Forum 95-1459R2에 규정되어 있다. 본 고에서는 적합성 시험을 위해서 관련 표준들을 어떻게 상호 협력해서 적합성 시험 환경을 구축하고, 이러한 환경에서 적합성 시험을 수행하고 생성된 결과를 어떻게 분석해야 히는지에 대한 방법에 대해서 기술하였다. 효율적으로 설명하기 위해서 임의의 시험 항목은 선정하였으며 이 시험 항목을 수행한 시험 결과를 분석하였다. 시험 항목에 대한 적합성 시험 수행 및 결과에 대한 분석 방법은 다른 여러 시험 항목 등에서도 적용되며,ATM망의 다른 통신 프로토콜들(signaling, AAL5 ATM layer, SSCF 등)과 다른 통신망(ISDN, SS7, IN 등)에서 사용되는 프로토콜들에 대해서도 동일하게 적용된다.

• 대한전자공학회논문지TC
• /
• 제44권4호
• /
• pp.28-39
• /
• 2007

본 논문에서는 저잡음 증폭기 (LNA)를 위한 새로운 구조의 프로그램 가능한 고주파 검사용 설계회로 (RF DFT)를 제안한다. 개발된 RF DFT 회로는 DC 측정만을 이용하여 LNA의 RF 변수를 측정할 수 있으며, 최근의 RFIC 소자에 매우 유용하다. DFT 회로는 프로그램 가능한 커패시터 뱅크 (programmable capacitor banks)와 RF 피크 검출기를 가진 test amplifier를 포함하며, 측정된 출력 DC 전압을 이용하여 입력 임피던스와 전압이득과 같은 LNA 사양을 계산할 수 있다. 이러한 온 칩 DFT 회로는 GSM, Bluetooth 및 IEEE802g 표준에 이용할 수 있는 3가지 주파수 대역, 즉 1.8GHz, 2.4GHz, 5.25GHz용 LNA에서 사용할 수 있도록 자체적으로 프로그램 할 수 있다. 이 회로는 간단하면서도 저렴하다

• 한국포장학회지
• /
• 제23권3호
• /
• pp.125-132
• /
• 2017

The effect of food simulants on properties and light barrier function of LDPE-nano $TiO_2$ composite film has been investigated. LDPE-nano $TiO_2$ composite films were prepared with 5.0wt% $TiO_2$ content by melt-extrusion. To simulate food contact environment, according to KFDA standards and specifications for food utensils, containers and packages, food simulants were selected with deionized water, 50% ethanol, 4% acetic acid and n-heptane and composite films were immersed in each food simulant at $70^{\circ}C$, 30 min except n-heptane ($25^{\circ}C$, 60 min). A variety of material properties, including crystallinity, chemical bonds, surface morphology, mechanical, oxygen barrier and optical properties, of LDPE-nano $TiO_2$ composite film were examined with and without the food simulants treatment. As a result, under regulated migration condition, LDPE-nano $TiO_2$ composite showed extremely stable in all properties tested in the study in contact with food simulants indicating that $TiO_2$ nanoparticles are physicochemically stable and quite compatible with LDPE. Results enable us to anticipate migration of $TiO_2$ will probably not occur. To evaluate influence of migration of $TiO_2$ on food stuffs, their color, pH and acidity were observed as well.

• 한국식품조리과학회지
• /
• 제27권3호
• /
• pp.81-93
• /
• 2011

We investigated perception and educational demand for health functional foods among nutrition teachers and dietitians working in schools. The subjects were 229 nutrition teachers (57.2%) and dietitians (42.7%) working in Chungbuk elementary, middle and high schools. Approximately 67% of the subjects had experience consuming health functional foods. Most of the subjects did not have experience with the side effects after consuming health functional foods. Subjects who were unaware of the legal specifications, classification, and labeling standards for health functional foods (78-91.2%) were much more common than those who were aware of those issues. Most of the subjects perceived health functional foods as a food (45.0%) or as a product between a food and a medicine (44.5%). The subjects recommended themselves (43.1%) or medical doctors/pharmacists (40.8%) as consultation/education specialists for health functional foods. Approximately 66% of the subjects had experience conducting nutritional consultation/education in their schools, but only 3.2% had experience with health functional foods. Only 17.8% of the subjects had experience receiving education on health functional foods. Most subjects (88.2%) demanded education on health functional foods for themselves. The results suggest that an effective education is needed for nutrition teachers and dietitians working in schools for them to play an active role in educating students and their parents about health functional foods in the near future.

• 한국포장학회지
• /
• 제26권2호
• /
• pp.113-118
• /
• 2020

Due to the rapid increase in cyber shopping mall of agricultural products, the parcel delivery service industry also increased, making it necessary to design an optimum packaging for agricultural products. And Due to the recent increase in strawberry consumption, there is also a need for a packaging system for parcel delivery service. In order to establish the criteria for optimum cushioning packaging design of strawberries, the bioyield strength of strawberries by storage time was measured through the ASABE test standards, and the peak acceleration in the resonance frequency and resonance frequency bands of strawberries was measured through the vibration test regulated in the ASTM test specifications. Tray cup pad and corrugated fiberboard box of delivery strawberries were designed using FEM theoretical analysis of contact stress and resonant frequency. In addition, an optimum packaging system was developed with a cushioning and vibration design considering the impact characteristics when distributing agricultural products. Through the performance evaluation and on-site evaluation of the optimum packaging system of strawberries for parcel delivery service, the random PSD test results of the delivery showed a 74% reduction in the acceleration level, and the actual distribution test of the delivery showed that the damage rate of strawberries was not more than 6.7%, indicating that it was possible to use the optimum packaging of strawberries for delivery.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.179-188
• /
• 2012

PURPOSES: The aim of this study is to analyze overloading control effectiveness of enforcing overweighted vehicles using HS-WIM (High-Speed Weigh-in-Motion) at main lane of expressway. METHODS: To analyze the weight distribution statistically, HS-WIM system should has an appropriate weighing accuracy. Thus, the weighing accuracy of the two HS-WIM systems was estimated by applying European specifications and ASTM (American Standards for Testing and Materials) for WIM in this study. Based on the results of accuracy test, overweight enforcement system has been operated at main lanes of two expressway routes in order to provide weight informations of overweighted vehicle in real time for enforcement squad. To evaluate the overloading control effectiveness with enforcement, traffic volume and axle loads of trucks for two months at the right after beginning of the enforcement were compared with data set for same periods before the enforcement. RESULTS: As the results of weighing accuracy test, both WIM systems were accepted to the most precise type that can be useful to applicate not only statistical purpose but enforcing on overweight vehicles directly. After the enforcement, the rate of overweighted trucks that weighed over enforcement limits had been decreased by 27% compared with the rate before the enforcement. Especially, the rate of overweighted trucks that weighed over 48 tons had been decreased by 91%. On the other hand, in counterpoint to decrease of the overweighted vehicle, the rate of trucks that weighed under enforcement limits had been increased by 7%. CONCLUSIONS: From the results, it is quite clear that overloading has been controlled since the beginning of the enforcement.

• 한국안전학회지
• /
• 제29권2호
• /
• pp.53-61
• /
• 2014

This study evaluated wind loads considering a local basic wind velocity and construction periods to define the level of applied wind loads for system supports. Structural responses of system supports were examined and compared to those of system supports with the level of wind loads following various standards and specifications for permanent and temporary structures. And, the maximum combined stress ratios were estimated to evaluate the structural safety of a considered system support. From results, it was found that the wind load level should be applied in accordance with construction periods when estimating the safety of system supports. Looking into the response by change of the basic wind velocity according to local regions, it is no need to consider wind loads in regions with the basic wind velocity of 30 m/s. However, it was analyzed that wind loads should be considered in the regions with the basic wind velocity of 40 m/s or above. In addition, wind loads should be considered in designing system supports located at the region with the basic wind velocity of 35 m/s starting from construction period of 1.5 years. The standard specification for temporary work was analyzed as an incorrect standard in evaluating wind loads, since it underestimated the response of system supports in accordance with the local basic wind velocity and construction periods.

• 한국정보통신학회논문지
• /
• 제19권10호
• /
• pp.2367-2372
• /
• 2015

탁월한 에러 정정 능력으로 인해 최근 통신 표준에서 많이 채택되고 있는 low-density parity-check(LDPC) 코드중, quasi-cyclic LDPC(QC-LDPC) 코드는 복호기 복잡도가 비교적 낮아서 많이 사용되고 있다. QC-LDPC 코드의 복호기 설계에 있어서 중요한 블록 중 하나가 여러 가지 크기의 rotation을 수행할 수 있는 multi-size circular shifter(MSCS)이다. MSCS의 여러 구현 방법 중 많이 사용되는 Benes 네트워크는 일반적인 MSCS 동작에는 효율적이나 rotation 크기 등의 특징을 이용할 수 없는 단점이 있다. 이 논문에서는 Benes 네트워크의 제어 신호 생성을 수정하여서 rotation 크기 특징을 이용할 수 있는 방법을 제시한다. 제안된 제어 신호 생성법을 IEEE 802.16e WiMAX 표준의 QC-LDPC 코드 복호기에 적용하여, MUX의 개수를 줄이고 지연 시간을 단축하였다.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.633-641
• /
• 2010

The purpose of this study is to evaluate a new flight suit in bilateral ways; subjectively and objectively in the improvements of comfort and mobility. Seven healthy males at the age of twenties volunteered in this wearing test. They were over 177 cm in height and 92-95 cm in chest circumference, which satisfies the M95 Special' size described in the Korean Military Specifications and Standards. The subjective satisfaction was evaluated according to the criteria of ease of donning and doffing, fitness of wear, mobility, space between cloth and body, convenience in using restroom. Subjective satisfaction evaluation says that the best improvement of movement are neck circumference, chest breadth, armscye circumference, waist back length, crotch length, crotch height and body rise. According to the evaluation, improvements of mobility were conspicuous especially in parts of body like neck, breast, waist, back, and arms. When evaluating objective satisfaction, we measured a angle difference in a prescribed standard-grid on a photograph that picked up while the subject performed each motion in front of 10 cm-interval grid. As a result, the motion that had angle difference above 5 degrees were arm stretching and standing on single leg holding at forward or at his side. Bending necks and waist, crouching also had angle difference of over 5 degrees. The improvements are discussed from the viewpoint that the increased ease in parts of armscye circumference and crotch in new flight suit pattern.

• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.201-209
• /
• 2014

Objectives: This study evaluated the solubility, dimensional alteration, pH, electrical conductivity, and radiopacity of root perforation sealer materials. Materials and Methods: For the pH test, the samples were immersed in distilled water for different periods of time. Then, the samples were retained in plastic recipients, and the electrical conductivity of the solution was measured. The solubility, dimensional alteration, and radiopacity properties were evaluated according to Specification No. 57 of the American National Standards Institute/American Dental Association (ANSI/ADA). Statistical analyses were carried out using analysis of variance (ANOVA) and Tukey's test at a significance level of 5%. When the sample distribution was not normal, a nonparametric ANOVA was performed with a Kruskal-Wallis test (${\alpha}$ = 0.05). Results: The results showed that white structural Portland cement (PC) had the highest solubility, while mineral trioxide aggregate (MTA)-based cements, ProRoot MTA (Dentsply-Tulsa Dental) and MTA BIO ($\hat{A}$ngelus Ind. Prod.), had the lowest values. MTA BIO showed the lowest dimensional alteration values and white PC presented the highest values. No differences among the tested materials were observed in the the pH and electrical conductivity analyses. Only the MTA-based cements met the ANSI/ADA recommendations regarding radiopacity, overcoming the three steps of the aluminum step wedge. Conclusions: On the basis of these results, we concluded that the values of solubility and dimensional alteration of the materials were in accordance with the ANSI/ADA specifications. PCs did not fulfill the ANSI/ADA requirements regarding radiopacity. No differences were observed among the materials with respect to the pH and electrical conductivity analyses.