• Resources Recycling
• /
• v.11 no.4
• /
• pp.3-10
• /
• 2002

The characteristics of dry and wet milled powder prepared by 1 cycle OREOX (oxidation and reduction of oxide fuels) treatment were investigated using the simulated spent fuel pellet. Sintered pellets simulating spent nuclear fuel burned in reactor were fabricated from $UO_2$ powder using as a starting material in fabrication of nuclear fuel. The 1 cycle OREOX-treated powder was prepared by only one path of oxidation md reduction of the simulated pellet. Powder having average particle size of less than 1 $\mu\textrm{m}$ could be easily obtained by dry milling, but not be achieved by wet milling. And, specific surface area of dry milled pow-der was higher than that of wet milled powder. Dry milled powder formed loose agglomerate, while wet milled powder showed the shape of irregular and angular particles. Dry milled powder provided higher green density, resulting in higher sintered density of higher than 95% TD and average grain size of larger than 8 $\mu\textrm{m}$ satisfying the standard specification of sintered pellets.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.9-17
• /
• 2016

In this study, a method for CO reduction using char-coal combustions was developed with lignin and glycerin as combustion improvers. The relationship between CO emission and the combustion improvers was confirmed by measuring the CO concentration. The experiment to determine the combustion characteristics was conducted using glycerin, which shows high combustibility at low temperatures, impregnated with lignin, which has a specific surface area. The combustibility, volatility, and CO concentration were measured using thermo-gravimetric analysis(TGA), and gas chromatography-mass spectrometry(GC-MS). This study presents the optimal CO reduction ratio, which occurred when the combustible material contained a 20% blend of combustion improvers. This resulted in a 20-30% CO reduction rate compared to that achieved with normal char-coal.

• Journal of Korean Society on Water Environment
• /
• v.33 no.3
• /
• pp.334-340
• /
• 2017

A pilot-scale electrodialysis system was designed and constructed to treat groundwater polluted with arsenic and manganese. Synthetic groundwater, in which some amount of arsenic and manganese was added to make 500 mg/L of Mn and $50{\mu}g/L$ of As, was used as a feed for the ED system. The limiting current density, linear water velocity, applied voltage, and membrane surface area were investigated to obtain efficient and economic operation of the ED system. The linear water velocity was increased 0.74 cm/s to 11 cm/s based on evaluation of limiting current density. The water quality of diluate for 85 minutes of operation was satisfied with water quality criteria for drinking water using the ED system with 14 pairs of ion exchange membranes. The increased membrane pairs to 21 and 42 pairs were very effective to reduce conductivities of the diluate. The operation cost of the ED system was assessed using specific energy consumption, which was $1.065{\sim}1.2kWh/m^3$. Considering low salt concentrations of the groundwater, improvement of the ED system are required to increase current utilization and to apply low voltage while the ED system was applicable to produce drinking water.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.193-197
• /
• 2014

The electrode for gas sensor was prepared by using pitch-based activated carbon fibers and polyvinyl alcohol (PVA) to investigate the toxic gas sensing characteristics. The physicochemical properties of activated carbon fibers electrode for gas sensor were analyzed with SEM and BET. Toxic gases sensing property of the electrode was also identified by different toxic gases such as $NH_3$, NO and $CO_2$. The specific surface area of activated carbon fibers electrode for gas sensor was decreased by 33% owing to PVA used as a binder compared with the activated carbon fibers. However, its pore size distribution of the ACF electrode was not greatly influenced by PVA. The activated carbon fibers electrode for gas sensor responded to toxic gases by electron hopping unlike semiconductor based gas sensors. In this study, activated carbon fibers electrode was decreased to 7.5% in resistance for the NH3 gas of the 100 ppm concentration and its $NH_3$ gas sensing property was confirmed the most excellent compared with other toxic gases.

• Korean Journal of Ecology and Environment
• /
• v.38 no.spc
• /
• pp.31-38
• /
• 2005

Diel change in urea decomposition activity of epiphytic algae on Phragmites stems and phytoplankton in a shallow littoral reed zone in the south basin of Lake Biwa was investigated with an in situ technique using $^{14}C$-labelled urea. The daily rates of urea decomposition (sum of urea carbon incorporation rate and $CO_2$ liberation rate) by epiphytic and planktonic algae were calculated as 180 ${\mu}$ mole urea surface shoot area $m^{-2}\;day^{-1}$ and 210 ${\mu}$ mole urea $m^{-3}\;day^{-1}$. The chlorophyll a specific urea decomposition rates of epiphytic and planktonic algae were 4.7 to 6.4 and 4.4 to 6.2 ${\mu}$ mole urea mg chl. $a^{-1}$ incubation $time^{-1}$ in daytime and 4.2 to 5.7 and 2.4 to 3.5 ${\mu}$ mole urea mg chl. $a^{-1}\;time^{-1}$ in nighttime, respectively. High values were obtained during 12:00 ${\sim}$ 18:00 and low values during 00:00 ${\sim}$ 06:00 for both epiphytic and planktonic algal communities. A clear diel periodicity in the urea decomposing activity of the planktonic algae was observed. The activity of the epiphytic algae, on the other hand, showed no destinctive variation during a day. The present results indicate that epiphytic algae are one of the significant urea decomposers in a reed zone, and that the diel patterns are quite difference between both algal communities.

• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.55-62
• /
• 1998

While excellent joint quality has been obtained using dry chamber underwater welding methods, the size limitations imposed by this process restrict its use for underwater construction work. The wet underwater shielded metal-arc welding eliminates this restriction but suffers from poor weld properties by the 1-pass bead-on-plate welding due to the excessive diffusible hydrogen. On the other hand, in the wet underwater welding, it is well known that the quantity of diffusible hydrogen in multi-pass welded parts reduce to less than that in 1-pass welded parts. Therefore, in this paper, welding experiments are made the 3-pass bead-on-plate welds by using TMCP and normalized steel plates and E4301 and cellulose coated electrode. After that, The amounts of the hydrogen absorbed into the 3-pass welded area were measured according to the JIS Z 3118 specification. The microstructural changes as well as the microhardness distribution after the underwater 3-pass welding were also investigated using Vickers microhardness tester and S.E.M and O.M. The results indicated that the quantity of diffusible hydrogen in 3-pass welded areas was reduced little less than a half of one of that in 1-pass welded areas at the specific welding condition. As a result, the cold cracking of 3-pass welded areas decreased by reduced effect of diffusible hydrogen. In the underwater 3-pass welding, the micrography of cold cracking fracture surface showed mainly the cleavage of hydrogen embrittlement.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.76-76
• /
• 2011

Polymer-fullerene based bulk heterojunction (BHJ) solar cells can be fabricated in large area using low-cost roll-to-roll manufacturing methods. However, because of the low mobility of the BHJ materials, there is competition between the sweep-out of the photogenerated carriers by the built-in potential and recombination within the thin BHJ film [12-15]. Useful film thicknesses are limited by recombination. Thus, there is a need to increase the absorption by the BHJ film without increasing film thickness. Metal nanoparticles exhibit localized surface plasmon resonances (LSPR) which couple strongly to the incident light. In addition, relatively large metallic nanoparticles can reflect and scatter the light and thereby increase the optical path length within the BHJ film. Thus, the addition of metal nanoparticles into BHJ films offers the possibility of enhanced absorption and correspondingly enhanced photo-generation of mobile carriers. In this work, we have demonstrated several positive effects of shape controlled Au and Ag nanoparticles in organic P3HT/PC70BM, PCDTBT/PC70BM, Si-PCPDTBT/PC70BM BHJ-based PV devices. The use of an optimized concentration of Au and Ag nanomaterials in the BHJ film increases Jsc, FF, and the IPCE. These improvements result from a combination of enhanced light absorption caused by the light scattering of the nanomaterials in an active layer. Some of the metals induce the plasmon light concentration at specific wavelength. Moreover, improved charge transport results in low series resistance.

• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.865-871
• /
• 1999

Effect of sintering condition in mechanical properties of ZrSiO\ulcorner shell molds was investigated. Number of microcrack in primary layer of the mold was maximized after preheating at $1000^{\circ}C$ for 1.5 hours. Yield strength and specific surface area of the mold were inversely proportion to sintering temperature and time. After hot deformation test at $1500^{\circ}C$ for 4 hours, molds were deformed opposite to the loading direction and backup layers were cracked along the interface between stucco and zircon slurry. Reverse deformation of the molds during hot deformation test was considered to be resulted from the difference of thermal expansion coefficient between alumina stucco and zircon slurry in primary coat, and size difference between zircon stucco and zircon slurry in backup coat.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.151-156
• /
• 1992

Using $Ba(OH)_2{\cdot}8H_2O, \;Sr(OH)_2{\cdot}8H_2O$ and $Ti(i-OC_3H_7)_4$, fine $(Ba_{1-x}, \;Sr_{x})TiO_3$ powders were synthesized through sol-gel process. The particle size of the powders calcined at $700^{\cric}C$ proved to be 20-40nm by the observation of TEM micrographs and measurement of BET specific surface area. The analysis of XRD patterns showed that the phase of the powders was cubic, and it was identified with the lattice parameters determined through XRD patterns and the shift of (112) peaks that the solid solution powders were synthesized. It was expected through the analysis of relative ratio of cations and the uniformity of compositions in the powders examined by EDAX analysis and relative dielectric constant measurements for sintered body that the distribution of cations was uniform in particle unit.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.88.1-88.1
• /
• 2012

Silicon nanowires (SiNWs), due to their unusual quantum-confinement effects that lead to superior electrical and optical properties compared to those of the bulk silicon, have been widely researched as a potential building block in a variety of novel electronic devices. The conventional means for the synthesis of SiNWs has been the vapor-liquid-solid method using chemical vapor deposition; however, this method is time consuming, environmentally unfriendly, and do not support vertical growth. As an alternate, the electroless etching method has been proposed, which uses metal catalysts contained in aqueous hydrofluoric acids (HF) for vertically etching the bulk silicon substrate. This new method can support large-area growth in a short time, and vertically aligned SiNWs with high aspect ratio can be readily synthesized with excellent reproducibility. Nonetheless, there still are rooms for improvement such as the poor surface characteristics that lead to degradation in electrical performance, and non-uniformity of the diameter and shapes of the synthesized SiNWs. Here, we report a facile method of SiNWs synthesis having uniform sizes, diameters, and shapes, which may be other than just cylindrical shapes using a modified nanosphere lithography technique. The diameters of the polystyrene nanospheres can be adjustable through varying the time of O2 plasma treatment, which serve as a mask template for metal deposition on a silicon substrate. After the removal of the nanospheres, SiNWs having the exact same shape as the mask are synthesized using wet etching technique in a solution of HF, hydrogen peroxide, and deionized water. Different electrical and optical characteristics were obtained according to the shapes and sizes of the SiNWs, which implies that they can serve specific purposes according to their types.