• Journal of Microbiology and Biotechnology
• /
• v.25 no.1
• /
• pp.109-118
• /
• 2015

Open raceway ponds are cost-efficient for mass cultivation of microalgae compared with photobioreactors. Although low-cost options like wastewater as nutrient source is studied to overcome the commercialization threshold for biodiesel production from microalgae, a cost analysis on the use of wastewater and other incremental increases in productivity has not been elucidated. We determined the effect of using wastewater and wavelength filters on microalgal productivity. Experimental results were then fitted into a model, and cost analysis was performed in comparison with control raceways. Three different microalgal strains, Chlorella vulgaris AG10032, Chlorella sp. JK2, and Scenedesmus sp. JK10, were tested for nutrient removal under different light wavelengths (blue, green, red, and white) using filters in batch cultivation. Blue wavelength showed an average of 27% higher nutrient removal and at least 42% higher chemical oxygen demand removal compared with white light. Naturally, the specific growth rate of microalgae cultivated under blue wavelength was on average 10.8% higher than white wavelength. Similarly, lipid productivity was highest in blue wavelength, at least 46.8% higher than white wavelength, whereas FAME composition revealed a mild increase in oleic and palmitic acid levels. Cost analysis reveals that raceways treating wastewater and using monochromatic wavelength would decrease costs from 2.71 to 0.73 $/kg biomass. We prove that increasing both biomass and lipid productivity is possible through cost-effective approaches, thereby accelerating the commercialization of low-value products from microalgae, like biodiesel.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.2
• /
• pp.391-407
• /
• 2013

The paper tests the embodiment hypothesis by measuring the technological obsolescence of a specific year (1990)'s technology and investigating the relationship between labor productivity and technological obsolescence. This approach is based on Salter (1969) that emphasizes the economic aspect of technology. We use the rate of economic surplus as the proxy of technological obsolescence for 10 main industries, including food processing, textiles, chemicals, non-steel metals, steels, metal products, machinery, electronics, precision machinery, and transportation equipments. The result shows that the embodiment hypothesis is not accepted for the overall manufacturing sector. However, we found the vintage effect - a positive relationship between technological obsolescence and labor productivity over time - in textiles, chemicals, non-steel metals, metal products, electronics, and transportation equipments. Therefore, the government should support R&D investment as well as capital equipments investment for the industries with large vintage effect.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.815-822
• /
• 2024

This study aims to facilitate the integration of digital technology into construction supervision by leveraging construction supervision checklists, a fundamental tool for inspections in this field. To achieve this, this research analyzed the tools and practices used in construction supervision, identifying 12 key supervision task types. These task types formed the basis for developing four distinct digital technologies, each tailored to specific inspection tasks based on practical feasibility. A checklist development process followed with the use of predefined criteria. Checklist items from the Ministry of Land, Infrastructure, and Transport of South Korea were analyzed and categorized according to the identified inspection task types. Digital technologies were then integrated for each task type, with corresponding supervision locations documented. This process enhanced the checklist's effectiveness by incorporating methods for digitizing tasks. The findings suggested that approximately 61% of traditional tasks could be potentially replaced by digital technology, highlighting the potential for successful digitization implementation. In addition, surveys among industry professionals provided insights into the level of productivity enhancement achievable through technology adoption compared to traditional practices, offering a basis for predicting productivity improvements across various disciplines. In conclusion, this research supports the effective integration of digital technology into construction supervision through an enhanced checklist. It also sheds light on practitioners' perceptions of technology usage and aids in developing strategies for technology adoption in this domain.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.4
• /
• pp.326-329
• /
• 2004

Corynebacterium acetoacidophilum RYU3161 was cultivated in a L-histidine-limited fed-batch culture. To investigate the effect of cell growth on the L-proline production, 5 L fed-batch culture was performed using an exponential feeding rate to obtain the specific growth rates $(\mu)$ of 0.04, 0.06, 0.08, and 0.1 $h_1$. The results show that the highest production of L-proline was obtained at $\mu$ = 0.04 $h_1$. The specific L-proline production rate $(Q_p)$ increased pro-portionally as a function of the specific growth rate, but decreased after it revealed the maxi-mum value at $\mu$ = 0.08 $h_1$. Thus, the highest productivity of L-proline was 1.66 g $L^-^1 h^-^1$ at $\mu$ = 0.08 $h_1$. The results show that the production of L-proline in C. acetoacidophilum RYU3161 has mixed growth-associated characteristics.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.2
• /
• pp.90-96
• /
• 1991

This experiment was carried out in order to estimate the recovery days of root and stubble to the days after cutting, and contribution of specific stubble weight on the regrowth was examined using the relationships between the dry weight of shoot and yield components, and regrowth parameters by the days after cutting. The varieties examined were Maprima, Manhattan, Tove, Peramo, Caliente, Tempo and P-2 grown under individual plant basis. The results are may be summarized as follows: 1. Dry weight of root and stubble were recovered up to 13.5 and 11 days after cutting, respectively. 2. Dry weight of shoot(regrowth parts+stubble) was affected significantly by the varieties, stages of regrowth and variety x stage of regrowth. 3. The variety with tiller weight type showed higher average productivity of shoot than those of the variety with tiller number type. 4. Absolute growth rate(AGR) of shoot was correlated significantly with regrowth parts, stubble, root and weight of a tiller at the early stage of regrowth(up to 12 days after cutting), and correlated with regrowth parts, stubble, weight of tiller and stubble area at the late stage of regrowth(up to 20 days after cutting). 5. Contribution of specific stubble weight to absolute growth rate of shoot was different between the stages of regrowth. Thus, regrowth parts per specific stubble weight(RP1SSbW) and weight of tiller per specific stubble weight(WT1SSbW) contributed to absolute growth rate of shoot at the early stage of regrowth, and efficiency of specific stubble weight(ESSbW), regrowth parts per specific stubble weight (RPISSbW) and weight of a tiller per specific stubble weight(WT1SSbW) contributed to absolute growth rate of shoot at the late stage of regrowth. 6. Regrowth utilization rate(RUR) was one of the useful regrowth parameter to indicate the regrowth potential of grasses.

• The Journal of Society for e-Business Studies
• /
• v.7 no.3
• /
• pp.49-60
• /
• 2002

Many researchers have studied component technologies with concept, methodology and implementation for partial business domain, however there are rarely researches for component classification to manage these systematically. In this paper, we suggest a component classification model, which can make component reusability higher and can derive higher productivity of software development. We take four focuses generalization, abstraction, technology and size. The generalization means which category a component belongs to. The abstraction means how specific a component encapsulates its inside. The technology means which platform for hardware environment a component can be plugged in. The size means the physical component volume.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.27
• /
• pp.27-34
• /
• 1993

It is requested to promote technology development and productivity that is way to conquer the competition of technology and quality and pressure of cost caused by a rise in prices. To pace up the market fluctution and the deepening of competion, there need a strategical thoughts of production management. Corporation's efforts concentrated in specific business field are desired to insure the initiative competion. In this paper, the concentration aimed at gaining higher competion is analized in the condition of equal enviornment and/or situation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.95.5-95
• /
• 2002

Tool condition monitoring is recognized important in CNC machining processes since the excessive wear or breakage of tool has to be noticed immediately in an automated manufacturing system to keep the quality and productivity. In this research, as an economic way of detecting the status of tool change, the wavelet transform has been applied to the measurement of spindle motor current. The energy of a specific level shows the difference between a normal tool and worn one. By setting a limit on the change of energy, it is possible to notify the time to inspect the tool.

• KCI Concrete Journal
• /
• v.12 no.1
• /
• pp.79-89
• /
• 2000

This research developed an accelerated curing processe for cellulose fiber reinforced cement composites using vigorous reaction between carbon dioxide and cement paste. A wet-processed cellulose fiber reinforced cement system was considered. Carbonation curing was used to complement conventional accelerated curing. The parametric study followed by optimization investigation indicated that the carbonation curing can enhance the productivity and energy efficiency of manufacturing cellulose fiber reinforced cement composites. This also adds environmental benefits to the technical and economical advantages of the technology.

• Korean Journal of Microbiology
• /
• v.18 no.2
• /
• pp.59-66
• /
• 1980

Two strains S-P and S-P-2, both Streptomyces sp., have been isolated and were found to have relatively high specific enzyme activity compared to other organisms reported. The specific activity of the enzyme produced from these two strains were 0.25 and 0.2 international units respectively. The productivity of the enzyme achieved was about 50 IU/l/hr. Glucose isomerase form these strains was found to be stable under the temperature of heat treatment (at $65^{\circ}C$) for fixation of enzyme inside the dell. This organism has an advantage in that it did not require toxic metalic ion for enzyme activity and could utilize xylan in leu of xylose as an inducer. The optimal temperature and pH of enzymatic reaction purpose of using these data for the optimal operation and designing of enzyme reactor system. The reaction mechanism was found to follow the single substrate reversible reaction kinetics. The kinetic constants determined experimentally are : $K_{mf}=0.33M,\;K_{mb}=1.0M,\;V_{mf}=0.88{\mu}mole\;per\;min.,\;V_{mb}= 2.96{\mu}mole\;per\;min.\;and\;K_{eq}=0.74.