• Title/Summary/Keyword: specific gravity (SG)

Search Result 26, Processing Time 0.018 seconds

Nail Withdrawal Behavior for Domestic Small Diameter Logs

  • Cha, Jae-Kyung
    • Journal of the Korean Wood Science and Technology
    • /
    • v.30 no.3
    • /
    • pp.104-108
    • /
    • 2002
  • Nail withdrawal tests were conducted on clear wood of domestic small diameter logs. Nails were driven into the cross and longitudinal sections of each specimen, then nail withdrawal tests were performed. Nail withdrawal loads are strongly dependent on the direction of nail positions. The average load values for the nail withdrawal both in cross section and longitudinal section are higher in high specific gravity (SG) wood of sawtooth oak (Quercus acutissima Carr.) than those in low SG wood of Korean red pine (Pinus densiflora Sieb. et Zucc.) and pitch pine (Pinus rigida Mill.). The average ratio of the nail withdrawal loads for side-grain and end-grain are higher in the low SG wood than that in the high SG of wood. Both linear and non-linear regression analyses were conducted on nail withdrawal load with SG, good correlations were obtained between nail withdrawal load and SG.

Specific Gravity and Dimensional Stability of Boron-Densified Wood on Three Lesser-Used Species from Indonesia

  • AUGUSTINA, Sarah;WAHYUDI, Imam;DARMAWAN, I Wayan;MALIK, Jamaludin;BASRI, Efrida;KOJIMA, Yoichi
    • Journal of the Korean Wood Science and Technology
    • /
    • v.48 no.4
    • /
    • pp.458-471
    • /
    • 2020
  • Effect of pre-treatment and compression ratio on specific gravity (SG) and dimensional stability improvement of three lesser-used wood species from natural forest area of North Kalimantan Province, Indonesia had been investigated. Hot soaking at 80℃ for 3 hours within 2 and 5% of boron solution was applied as pre-treatment, while compression ratio applied was 20 and 40% from the initial thickness. Densification was conducted using hot pressing machine at 30 kg/㎠ of pressure and 160℃ of temperature for 15 minutes. Specific gravity was measured gravimetrically, while dimensional stability was evaluated through thickness swelling and water absorption as the indicator. Results show that SG of densified wood was influenced by wood species and compression ratio, but not by pre-treatment applied; while dimensional stability was influenced by wood species, compression ratio, and pre-treatment. Specific gravity and water absorption of densified wood was improved significantly. Specific gravity increased 28.86-63.03%, while water absorption decreased 12.80-15.89%. Thickness swelling of 20% densified wood was lower than that of 40% densified wood.

Urine Specific Gravity as a Useful Tool for Screening Proteinuria in Children (소아 단백뇨 검사에 있어서 요비중의 유용성)

  • Kim, Jong-Hwa;Yoo, Kee-Hwan;Hong, Young-Sook;Lee, Joo-Won;Kim, Soon-Kyum
    • Childhood Kidney Diseases
    • /
    • v.4 no.1
    • /
    • pp.1-5
    • /
    • 2000
  • Purpose: The plcr of spot urine has been uised to predict the timed urine protein excretion. Although this method reduces errors caused by variations in urine volume, it is relatively thconvenient and expensive. Recently, a more rapid and less expensive screening method with specific gravity(SG) has been reported, and we have examined whether estimated-creatinine(Cr-est) with urine 5G could be used in place of urine creatinine to predict 24-hour collected urine protein excretion in children. Methods: We had retrospectively analyzed protein, creatinine and urine SG in randomized spot urine samples of 147 patients from March 1998 till June 1998 in Korea university Guro hospital and compared the urinary protein creatinine ratio(P/Cr) with the protein estimated-creatinine ratio(P/Cr-est). We compared the correlation of urinary creatinine vs-urine 5G with the timed urine pretein excretion. Results: 1) urine SG accurately estimated urine creatinine concentration (r=0.407, P<0.001, Cr=SG x 4485.82-4482.87). 2) P/Cr correlated with urine protein excretion measured in a 24-hour urine collection (r=0.771, P<0.001, 24-hour collected urine protein : 0.338 x (P/Cr) 4+667.885). 3) P/Cr-est correlated with a 24-hour collected urine protein (r=0.723, P<0.001, 24-hour collected urine protein =0.354 x (P/Cr-est)+726.044), Conclusions: These results suggest that P/Cr-est with urine SG could be useful method for screening proteinuria in children.

  • PDF

An investigation on the in si·tu measurement of the oil-concentration with densimeter (밀도계를 이용한 비추출식 냉동기유농도 측정에 관한 연구)

  • Kim, S.H.;Kim, C.N.;Park, Y.M.
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.11 no.1
    • /
    • pp.31-37
    • /
    • 1999
  • In order to predict thermodynamic performance of refrigeration system, it is required to know the oil concentration of the refrigerant/oil mixture. The current method to measure the oil concentration is to extract the working mixture and then to measure the oil weight. However, it is Quite necessary to estimate oil concentration without any extraction of the working fluid. In this study a new method and working equation is presented as follows. It is based on the measurement of spedific gravity and temperature : $$C=a+b{\times}t+c{\times}t^2+(d+e{\times}t+f{\times}t^2){\times}SG$$ C is oil concentration, t is temperature($^{\circ}C$), SG is specific gravity of mixture and a~f is coefficients. The oil concentration ranges over 0~12 wt% and the temperature ranges over $20{\sim}50^{\circ}C$. The specific gravity and temperature are measured using the on-line densimeter and thermometer. This working equation enables to predict the oil concentration without any extraction of the mixture. This equation can be applied for R-12/Naphthenic oil and R-134a/POE oil oiquid mixtures.

  • PDF

A Comparison of the Adjustment Methods for Assessing Urinary Concentrations of Cadmium and Arsenic: Creatinine vs. Specific Gravity (요중 카드뮴과 비소의 보정방법 비교 : 요중 크레아티닌과 요비중)

  • Kim, Dong-Kyeong;Song, Ji-Won;Park, Jung-Duck;Choi, Byung-Sun
    • Journal of Environmental Health Sciences
    • /
    • v.37 no.6
    • /
    • pp.450-459
    • /
    • 2011
  • Objectives: Biomarkers in urine are important in assessing exposures to environmental or occupational chemicals and for evaluateing renal function by exposure from these chemicals. Spot urine samples are needed to adjust the concentration of these biomarkers for variations in urine dilution. This study was conducted to evaluate the suitability of adjusting the urinary concentration of cadmium (uCd) and arsenic (uAs) by specific gravity (SG) and urine creatinine (uCr). Methods: We measured the concentrations of blood cadmium (bCd), uCd, uAs, uCr, SG and N-acetyl-${\beta}$-D-glucosaminidase (NAG) activity, which is a sensitive marker of tubular damage by low dose Cd exposure, in spot urine samples collected from 536 individuals. The value of uCd, uAs and NAG were adjusted by SG and uCr. Results: The uCr levels were affected by gender (p < 0.01) and muscle mass (p < 0.01), while SG levels were affected by gender (p < 0.05). Unadjusted uCd and uAs were correlated with SG (uCd: r = 0.365, p < 0.01; uAs: r = 0.488, p < 0.01), uCr (uCd: r = 0.399, p < 0.01; uAs: r = 0.484, p < 0.01). uCd and uAs adjusted by SG were still correlated with SG (uCd: r = 0.360, p < 0.01, uAs: r = 0.483, p < 0.01). uCd and uAs adjusted by uCr and modified uCr ($M_{Cr}$) led to a significant negative correlation with uCr (uCd: r = -0.367, p < 0.01; uAs: r = -0.319, p < 0.01) and $M_{Cr}$ (uCd: r = -0.292, p < 0.01; uAs: r = -0.206, p < 0.01). However, uCd and uAs adjusted by conventional SG ($C_{SG}$) were disappeared from these urinary dilution effects (uCd: r = -0.081; uAs: r = 0.077). Conclusions: $C_{SG}$ adjustment appears to be more appropriate for variations in cadmium and arsenic in spot urine.

An investigation on the in si.tu measurement of the oil-concentration

  • Kim, Chang-Nyeun;Park, Young-Moo
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • v.9 no.1
    • /
    • pp.20-28
    • /
    • 2001
  • In order to predict thermodynamic performance of refrigeration system, it is required to know the oil concentration of the refrigerant/oil mixture. The current method is to extract the working mixture and then to measure the oil weight. In this study, oil concentration is measured in si.tu way without any extraction of the working fluid. Based on the measurement, a working equation is presented as follows, C=a +b x t +c x $t^2$ +(d + e x t +f x $t^2$) x SG. C is oil concentration, t is temperature($^{\circ}C). SG Is specific gravity of mixture and a~f is coefficients The oil concentration ranges over 0~l2 wt% and the temperature ranges over 20~50$^{\circ}C. The specific gravity and temperature are measured using the on-line densimeter and thermometer. This working equation enables to predict the oil concentration without any extraction of the mixture. This equation can be applied for R-12/Naphthenic oil and R-134a/P0E oil liquid mixtures.

  • PDF

An investigation on the in si.tu measurement of the oil-concentration

  • Kim, Chang-Nyeun;Park, Young-Moo
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • v.8 no.2
    • /
    • pp.80-88
    • /
    • 2000
  • In order to predict thermodynamic performance of refrigeration system, it is required to know the oil concentration of the refrigerant/oil mixture. The current method is to extract the working mixture and then to measure the oil weight. In this study, oil concentration is measured in si.tu way without any extraction of the working fluid. Based on the measurement, a working equation is presented as follows, C=a +b x t +c x $t^2$ +(d + e x t +f x $t^2$) x SG. C is oil concentration, t is temperature($^{\circ}C). SG Is specific gravity of mixture and a~f is coefficients The oil concentration ranges over 0~l2 wt% and the temperature ranges over 20~50$^{\circ}C. The specific gravity and temperature are measured using the on-line densimeter and thermometer. This working equation enables to predict the oil concentration without any extraction of the mixture. This equation can be applied for R-12/Naphthenic oil and R-134a/P0E oil liquid mixtures.

  • PDF

Prediction of Carcass Fat, Protein, and Energy Content from Carcass Dry Matter and Specific Gravity of Broilers

  • Wiernusz, C.J.;Park, B.C.;Teeter, R.G.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.12 no.1
    • /
    • pp.42-48
    • /
    • 1999
  • Three experiments were conducted to develop and test equations for predicting carcass composition. In the first study using 52 d-old Cobb ${\times}$ Cobb male broilers, twenty four carcasses were selected from 325 processed birds based upon visual appraisal for abdominal fat (low, medium, high) and assayed for specific gravity (SG), dry matter (DM), fat, protein, and ash. In experiment 2, 120 birds were fed rations containing 2 caloric densities (2,880 and $3,200kcal\;ME_n/kg$ diet) and assayed as described above on weeks 2,3,4,5, and 6. Carcass fat was elevated (p < 0.05) with increased caloric density. In both studies predictive variables were significantly correlated with chemically determined carcass fat, protein, and ash contents. Pooled across the 2 studies, data were used to form SG, DM, and or age based equations for predicting carcass composition. Results were tested in experiment 3, where 576 birds reared to 49-d consumed either 2,880, 3,200, or $3,574kcal\;ME_n/kg$ diet while exposed to constant $24^{\circ}C$ or cycling 24 to $35^{\circ}C$ ambient temperatures. Both dietary and environmental effects impacted (p < 0.05) carcass composition. The fat content analyzed chemically was enhanced from 12.4 to 15.7%, and predicted fat was also elevated from 13.4 to 14.8% with increasing caloric density. Heat distress reduced (p < 0.05) analyzed carcass protein (18.9 vs 18.3%) and predicted protein (18.2 vs 17.5%). Predicted equation values for carcass fat, protein, ash, and energy were correlated with the chemically analyzed values at r=0.96, 0.77, 0.86, and 0.79, respectively. Results suggest that prediction equations based on DM and SG may be used to estimate carcass fat, protein, ash, and energy contents of broilers consuming diets that differ in caloric density (2,800 to $3,574kcal\;ME_n/kg$) and for broilers exposed to either constant ($24^{\circ}C$) or cycling high (24 to $35^{\circ}C$) ambient temperatures during 49-d rearing period tested in the present study.

Effects of Factors Associated with Urine Hippuric Acid Correction Values in Urinary Creatinine by HPLC and Jaffe Method and Specific Gravity HPLC Jaffe Method (HPLC와 Jaffe method의 요중 크레아티닌 및 비중이 마뇨산 보정값에 미치는 요인에 관한 연구)

  • Kim, Key-Young;Kim, Jong-Gyu;Yoon, Ki-Nam;Park, Wha-Me;Park, Hun-Hee
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.25 no.4
    • /
    • pp.493-505
    • /
    • 2015
  • Objectives: The purpose of this study was to evaluate the relevance of adjusting a urinary sample for urine hippuric correction value and its effects. Urinary biological monitoring data are typically adjusted to a constant creatinine and specific gravity concentration to correct for variable dilutions among spot samples. This study was conducted to evaluate the suitability of adjusting the urinary concentrations of urine creatinine and specific gravity(SG). Methods: We measured the concentrations of hippuric acid, in spot urine samples collected from control(119), case(120) individuals. The value of hippuric acid was adjusted by SG and urinary creatinine(HPLC & Jaffe). Results: The major results were as follows. The concentrations of urinary creatinine and SG for the control group were 1.84 g/L(SD 0.99) for arithmetic mean and 1.56 g/L(GSD 1.86) for geometric mean by HPLC method, 1.57 g/L (SD, 0.82) for arithmetic mean and 1.33 g/L(GSD 1.85) for geometric mean by Jaffe method, 1.028(SD 0.09) for arithmetic mean and 1.02(GSD 1.06) for geometric mean by refractometer. Hippuric acid levels were 0.40 g/L(SD 0.51) by arithmetic mean and 0.20 g/L(GSD 3.59). In that case the exposed group was 1.40 g/L(SD 0.58) for arithmetic mean and 1.28 g/L(GSD 1.55) for geometric mean by HPLC method, 1.27 g/L(SD 0.56) for arithmetic mean and 1.14 g/L(GSD 1.62) for geometric mean by Jaffe method, 1.045 L(SD 0.27) for arithmetic mean and 1.02(GSD 1.13) for geometric mean by refractometer(P<0.05). Hippuric acid levels were 0.67 g/L(SD 0.79) for arithmetic mean and 0.39 g/L(GSD 2.94)(p<0.05). The urine creatinine concentrations were affected by gender(p < 0.01) but SG levels were not affected by gender or age(p>0.05). After adjustment, urine hippuric acid was correlated with creatinine(HPLC & Jaffe)(r=0.723, P<0.05, r=0.708, P<0.05) and SG(r=0.936, P<0.05) and the control group shows significantly higher than the case group. In the case group for adjusted urine hippuric acid was correlated with creatinine(HPLC & Jaffe), (r=0.736, P<0.05), r=0.549, P<0.05), SG(r=0.549, P<0.05). After adjusting urine hippuric acid by urine creatinine(HPLC and Jaffe method) and specific gravity, significant associations were found between the control group and case group, respectively(r=0.832, P<0.05, r=0.845, P<0.05) and (r=0.841, P<0.05, r=0.849, P<0.05). Specific gravity adjustment appears to be more appropriate for variations in the urine creatinine method. Conclusion: we found that urinary creatinine concentrations were significantly affected by gender, and other factors and that care should therefore be exercised when correcting urinary metabolites according to the urinary creatinine concentration in spot urine. It is determined that additional study is needed for biological monitoring.

Predicting the Screw Withdrawal Load of Commercial Particleboard Manufactured in Korea (국내에서 생산된 파티클보드의 나사못 유지력 예측)

  • Cha, Jae Kyung
    • Journal of the Korean Wood Science and Technology
    • /
    • v.41 no.6
    • /
    • pp.544-550
    • /
    • 2013
  • Tests were carried out on commercial particleboards manufactured in Korea to evaluate and modify formulas which had previously been developed to predict the holding loads of screw on the face and edge of specimen. Screw sizes were No. 6, 8 and 10 used in this study. The withdrawal loads of screws were developed to predict as a function of screw diameter, depth of penetration, specific gravity and IB of particleboard. Predicted equations were fitted to the test results of different length of No. 8 screws. Results of tests indicate that IB is a better predictor of holding loads on the face of particleboard than SG. On the other hand, SG is a good indicator of holding load on the edge of particleboard.