• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.6
• /
• pp.1-9
• /
• 2004

For improvement of productivity and cutting tool lift, cutting force in end milling needs to be predicted accurately. In order to analyze cutting force, the cutting dynamics was modelled mathematically by using chip load, cutting geometry, and the relationship between cutting forces and the chip load. Specific cutting force coefficients of the cutting dynamics model were obtained by average cutting forces, tool diameter, cutting speed, fled, axial depth and radial depth of cut. The effects of the cutting conditions on the specific cutting force constants in milling were studied. The model is verified through comparisons of model predicted cutting forces with measured cutting forces obtained from machining experiments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.1
• /
• pp.53-60
• /
• 1992

In this study, cathodic protection experiment was carried out by Al-alloy sacrificial anode in marine environments which have specific resistance($\rho$) if 25~7000$\Omega$.cm and investigated protection potential, current density and loss rate of Al-alloy sacrificial anode. The main results resistance($\rho$) of 400$\Omega$.cm, the cathodic protection potential appears high about-720 mV(SCE). But below specific resistance($\rho$) of 300$\Omega$.cm, the cathodic protection potential appears low about-770 mV(SCE) and simultaneously, cathode is protected sufficiently. 2) The loss rate of Al-Alloy sacrificial anode became large with decreasing specific resistance and increasing the ratio(A sub(c)/A sub(a) of bared surface area of anode and cathode. 3) The loss rate of Al-alloy sacrificial anode(w) to the mean current density of anode(i) is as follows. w=ai+b (a, b : experimental constants)

• Journal of Environmental Science International
• /
• v.9 no.1
• /
• pp.75-80
• /
• 2000

Kinetic data for the acid phase anaerobic digestion were presented in this study and the constants were determined with acid production rate and gas production rate. Process models based on continuous culture theory were used to describe the characteristics of the acid forming microorganisms and to enable further development toward utilization of the process in a more rational manner. Acid phase digestion can be separated with appropriate manipulation of hydraulic retention time in anaerobic digestion. Kinetic analysis of data from the various hydraulic retention times using a phase specific model obtained form the acid phase indicated maximum specific growth rate of 0.40/h, saturation constant of 2,000mgCOD.$\ell$, yield coefficient of 0.35 mgVSS/msCOD utilized and decay constant of 0.04/h for the acid production rate. Similar analysis of data for the gas production rate indicated maximum specific growth rate of 0.003/h, saturation constant of 2,200mgCOD/$\ell$, yield coefficient of 0.035 mgVSS/mgCOD utilized and decay constant of 0.06/h.

• BMB Reports
• /
• v.31 no.2
• /
• pp.139-143
• /
• 1998

The catabolic ${\alpha}-acetolactate$ synthase purified from Serratia marcescens ATCC 25419 was rapidly inactivated by the tryptophane-specific reagent, N -bromosuccinimide, and the arginine-specific reagent, phenylglyoxal. The enzyme was inactivated slowly by the cysteine-specific reagent N-ethylmaleimide. The second-order rate constants for the inactivation by N-bromosuccinimide, phenylglyoxal. and N -ethylmaleimide were $114,749M^{-1}min^{-1}$, $304.3M^{-1}min^{-1}$, and $5.1M^{-1}min^{-1}$, respectively. The reaction order with respect to N-bromosuccinimide, phenylglyoxal, and N-ethylmaleimide were 1.5,0.71, and 0.86, respectively. The inactivation of the catabolic aacetolactate synthase by these modifying reagents was protected by pyruvate. These results suggest that essential tryptophane, arginine, and cysteine residues are located at or near the active site of the catabolic ${\alpha}-acetolactate$ synthase.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.292-292
• /
• 2006

A two-step process of the solution blending and the subsequent melt mixing in a Brabender mixer was used to prepare clay nanocomposites of SAN/PVC and of ABS, respectively. It was found that the new method was effective in obtaining well-dispersed nanocomposites for both cases. The glass transition behavior of the organoclay nanocomposites were analyzed by using theoretical equations. The interaction characteristics were evaluated by using the solubility parameters estimated from the group molar attraction constants.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.272-277
• /
• 2003

In order to predict vibration during end-milling process, the cutting dynamics was modelled by using neural network and combined with structural dynamics by considering dynamic cutting states. Specific cutting constants of the cutting dynamics model were obtained by averaging cutting forces and tool diameter, cutting speed, feed, axial depth radial depth were considered as machining factors. Cutting farces by test and by neural network simulation were compared and the vibration during end-milling was simulated.

• Proceedings of the IEEK Conference
• /
• 2003.11b
• /
• pp.19-22
• /
• 2003

Class area is a portion of memory where the constants, fields, and codes of the classes loaded into the Java virtual machine are kept. Knowing the site of the class area is very important especially for embedded Java system with limited memory resources. This paper induces a formula which makes it possible estimate the size of the area. The formula needs some constant values specific to target JVM implementation. We also show that these values can be found using some simple probe classes. An experimental result is included in this paper to confirm the correctness of our approach.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.5
• /
• pp.1-7
• /
• 2003

In order to predict vibrations occurred during end-milling processes, the cutting dynamics was modelled by using neural network and combined with structural dynamics by considering dynamic cutting state. Specific cutting force constants of the cutting dynamics model were obtained by averaging cutting forces. Tool diameter, cutting speed, fled, axial and radial depth of cut were considered as machining factors in neural network model of cutting dynamics. Cutting farces by test and by neural network simulation were compared and the vibration displacement during end-milling was simulated.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.04a
• /
• pp.115.2-115
• /
• 1979

By employing a two-stage continuous culture system, some of important physiological parameters involved in cellulase bicsynthesis have been evalua-ted with an ultimate objective of detigning an op-timally controlled tellulase process. Volumetric and specific cellulase productivities obtained were 90 IU/liter/hr and 8IU/g biomass/hr respectively. The maximum specific enzyme productivity observed was 14.8 IU/g hiomass/hr. The optimal dilution rate in the second stage which corresponded to the maximum enzyme productivity was 0.026-0.028 hr$^{-1}$ , and the specific growth rate in the second stage ihat suported maximum specific enzyme productivity was equal to orslightly less than zero. The maintenance coefficients deter-mined for oxygen and for carbon source are M$_{o}$=0.85mmmole/g biomass/hr and M$_{c}$=0.14 mmole hexose/g bio mass/hr respectively. The yield constants determined are; Y(x/o) =32.3g biomass/mole oxygen, Y (x/c) =1.1g bio-mass/g carbon or 0.44g biomass/g hexose, Y(x/n) = 19.6g biomass/g nitrogen for the enzyme produc-tion stage and 12.5g biomass/g nitrogen for the cell growth stage.e.e.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.93-100
• /
• 1987

Corrosion fatigue cracking of the austenitic stainless steel(bese metal & heat affected zone by TIG weld) was studied experimentally under the environments of various specific resistance and air. The characteristics of corrosion fatigue crack growth rate and the environmental constants of paris' rule were investigated for SUS 304 weldments in the various specific resistance. The influences of stress intensity factor range and corrosion on the crack growth rate were compared. The characteristics of corrosion fatigue cracking for the weldments were inspected from mechanical, electrochemical and microstructural point of view. Main results obtained are as follows: 1) As the specific resistance decreases, the environmental constant C of paris'rule increases(hence the corrosion fatigue crack growth rate is rapid), but the environmental constant m decreases, so the effect of corrosion to the crack growth rate is more susceptible than thet of stress intensity factor range. 2) As the stress intensity factor range decreases, the corrosion fatigue crack growth rate of heat affected zone is more susceptible than that of the base metal. 3) The corrosion fatigue crack growth rate of the heat affected zone is more rapid than that of the base metal, because of the phenomenon of softening and the less noble potential coused by wedlding heat cycle. 4) The corrosion fatigue cracking of SUS 304 weldment appears transgranular fracture.