• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.289-296
• /
• 2007

The material factors influencing the sound absorption of the polyurethane foam were investigated with FT-IR, small-angle X-ray scattering (SAXS), and dynamic mechanical thermal analyzer (DMTA). The measurements were performed using the samples which had a similar cell structure but different absorption coefficients. It was found that the ability of the sound absorption of the polyurethane foams was closely related to the damping behavior over the transition range. In order to confirm the use of the low monol polyol (LMP) in high-performance applications, the polyurethanes based on LMP and polypropylene oxide polyol (PPG) were prepared by the solution polymerization method. The microstructure and the physical properties of these polyurethanes were compared. The PPG-based polyurethane showed a higher level of the phase-separated structure because the considerable amount of monol presented in PPG made a contribution to the increased chain mobility. However the short chains formed due to the monol species deteriorated the damping property. As a result, the LMP-based polyurethane showed the superior damping behavior as compared with the PPG-based one.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3103-3103
• /
• 2001

NIR has been extensively used to predict directly measurable properties of materials that are important to the appropriate industries. Commonly, NIR is used to perform fast, routine tests to improve control response as against the response time for the (normally chemical) base test. This paper discusses the use of NIR to measure indirect properties of materials. In these cases, the pure chemical or physical tests are either unable measure the appropriate parameters (eg GMO modification) or there are mitigating effects that are not properly addressed by the base tests. In particular, we looked at the digestible portion of amino acids within meat and bone meal. This is the desired response measurement by end-users of the product (intensive livestock producers) but is currently unable to be offered as a measurement by producers. The base test method is by controlled feeding trials. These are somewhat cumbersome, taking 2-3 months, involving several sets of animals, and considerable expense. A shortened test (feed trial based) would be of little use, as the precision blows out over short period feeding trials. For example, a rat ileal digestibility test requires around 2 months, and costs some $USD1000. This is clearly impractical test for a producer involved in continuous production, with a 1-2 day turn around. While the amino acid abundance is accessible chemically, the uptake of amino acids into usable material by mammalian species is not simply related to the measured abundance within the material. There are many co-related material properties that might help or hinder uptake, some chemical based (eg protein damage), some indirect (eg palatability), some physiological (intestinal tract response vs speed of throughput). We discuss the approaches taken to provide a suitable reference data set, and present the derived prediction and validation relationships.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.27 no.1
• /
• pp.142-158
• /
• 2013

The bumblebee, Bombus ignitus (Hymenoptera: Apidae), is a valuable natural resource that is widely utilized for greenhouse pollination in South Korea. Understanding the magnitude of genetic diversity and geographic relationships is of fundamental importance for long term preservation and utilization. As a first step, we sequenced a partial COI gene of mitochondrial DNA (mtDNA) corresponding to the "DNA barcode" region and the complete internal transcribed spacer 2 (ITS2) of nuclear ribosomal DNA from 88 individuals collected in nine South Korean localities. The complete ITS2 sequences were longest among known insects, ranging in size from 2,034 bp ~ 2,052 bp, harboring two duplicated 112-bp long repeats. The 658-bp long mtDNA sequences provided only six haplotypes with a maximum sequence divergence of 0.61% (4 bp), whereas the ITS sequences provided 84 sequence types with a maximum sequence divergence of 1.02% (21 sites). The combination of the current COI data with those of published data suggest that the B. ignitus in South Korea and China are genetically a large group, but those in Japan can be roughly separated into another group. Overall, a very high per generation migration ratio, a very low level of genetic fixation, and no discernable hierarchical population were found to exist among the South Korean populations of B. ignitus, which suggests panmixia. This finding is consistent with our understanding of the dispersal capability of the species.

• Environmental Analysis Health and Toxicology
• /
• v.30
• /
• pp.17.1-17.6
• /
• 2015

Objectives In this study, the possibility of using existing test data provided in Korea and elsewhere for the registration of chemical substances was examined. Data on 510 chemical substances that are among the first subject to registration under the "Act on the Registration and Evaluation, etc. of Chemical Substances (K-REACH)" were analyzed. Methods The possibility of using existing data from 16 reference databases was examined for 510 chemical substances notified in July 2015 as being subject to registration. Results Test data with the reliability required for the registration of chemical substances under the K-REACH constituted 48.4% of the required physicochemical characteristics, 6.5% of the required health hazards, and 9.4% of the required environmental hazards. Conclusions Some existing test data were not within the scope of this research, including data used for registration in the European Union (EU). Thus, considering that 350 of these 510 species are registered in EU Registration, Evaluation, Authorisation & Restriction of Chemicals, more test data may exist that can be utilized in addition to the data identified in this study. Furthermore, the K-REACH states that non-testing data (test results predicted through Read Across, Quantitative Structure-Activity Relationships) and the weight of evidence (test results predicted based on test data with low reliability) can also be utilized for registration data. Therefore, if methods for using such data were actively reviewed, it would be possible to reduce the cost of securing test data required for the registration of chemical substances.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.2
• /
• pp.191-202
• /
• 2007

We developed an in-situ analyzer to understand the HONO levels in indoor environments. The in-situ measurement system utilizes a diffusion scrubber and luminol chemiluminescence to measure the HONO concentration with time resolution of 4-minute. Concentrations of NO, $NO_{2}$, and HONO were determined at an indoor air of an apartment for 9 days using the developed in-situ analyzer. Indoor HONO concentrations were highly elevated when a gas range was operated. Enhancements of the indoor NO, $NO_{2}$, and HONO concentrations during combustion indicate that the observed indoor HONO was formed by direct emission. In addition to the direct emission, the indoor HONO was partially generated from heterogeneous reactions of $NO_{2}$ on indoor surfaces, which was supported by strong relationships between peak NO, $NO_{2}$, and HONO concentrations, high HONO/$NO_{2}$ ratio and a weak correlation between NO and HONO concentrations. Additionally, three combustion experiments during the whole measurement period were performed to investigate the effects of unvented and vented gas burning on the HONO, NO, and $NO_{2}$ concentrations and their decay. The decay rate of the HONO concentration was significantly less than the NO and $NO_{2}$ decay rates for all the experiments, indicating that the lifetimes of trace nitrogen species in indoor environment varied in the order approximately HONO>$NO_{2}$>NO.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.35 no.1
• /
• pp.51-57
• /
• 2017

The tiny dragonfly, Nannophya pygmaea (Odonata: Libellulidae), is an endangered insect in South Korea. Previously, a partial mitochondrial DNA sequence that corresponded to a DNA barcoding region has been used to infer genetic diversity and gene flow. In this study, we additionally sequenced the barcoding region from N. pygmaea that had been collected from three previously sampled populations (40 individuals) and these sequences were combined with the preexisting data. We also selected and sequenced an additional mitochondrial gene (ND5) to find further variable gene regions in the mitochondrial genome. DNA barcoding sequences of 108 individuals from five South Korean localities showed that genetic diversity was highest in Gangjin, Jeollanam-do Province. Muuido, which was previously occupied by a single haplotype, was also found to have an identical haplotype, which confirmed the low genetic diversity on this islet. Gene flow among populations is highly limited, and no clear distance- or region-based geographic partitioning was observed. Phylogenetic relationships among haplotypes showed that there were no discernable haplotypes in South Korea. ND5 provided slightly more haplotypes compared to the barcoding region in 40 individuals (14 vs. 10 haplotypes in the COI gene). It also had a slightly higher within-locality diversity estimate, which suggested that ND5 had potential as mitochondrial DNA-based marker for population genetic analysis.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.43-43
• /
• 2018

Mutation breeding by radiation is useful for improving various crop species. Up to now, a total of 170 soybean mutant varieties have been released in the world, which is the second most registered varieties after rice. Despite the economic importance of soybean, there have been no TRAP marker system studies on genetic relationships between/among mutant lines. To develop a strategy of Mutant Diversity Pool (MDP) conservation, a study on the genetic diversity of 210 soybean mutant lines (8 cultivars and 202 mutants) was performed through a TRAP analysis. Sixteen primer combinations amplified a total of 551 fragments. The highest (84.00%) and lowest (32.35%) polymorphism levels were obtained with primers MIR157B + Ga5 and B14G14B + Ga3, respectively. The mean PIC values 0.15 varied among the primer combination ranging from 0.07 in B14G14B + Sal2 to 0.23 in MIR157B + Sa4. Phylogenetic, principal component analysis (PCA) and structure analysis indicated that the 210 lines belong to four groups based on the 16 combination TRAP markers. AMOVA showed 21.0% and 79.0% variations among and within the population, respectively. Overall, the genetic similarity of each cultivar and its mutants were higher than within other mutant populations. Our results suggest that the TRAP marker system may be useful for assessing the genetic diversity among soybean mutants and help to improve our knowledge of soybean mutation breeding.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.74-74
• /
• 2018

Little millet (Panicum sumatrense) is well known for its salt and drought stress tolerance and high nutritional value, but very limited knowledge of genetic variation and genomic information is available. This study was to develop highly polymorphic EST-SSR markers based on cross-species transferability of derived SSRs from switchgrass EST databases and characterize newly developed EST - SSRs to better understand the genetic diversity of collected 37 germplasm accessions of little millet. A total of 779 primer pairs were designed from the 22,961 EST sequences of switchgrass (Pancium virgatum), of which 48 EST - SSR markers were developed based on the trials of transferability of these primers in little millet. The EST - SSR amplicons showed reproducible single band polymorphism and produced a total of 160 alleles with an average of 3.3 alleles per locus in 37 accessions of little millet. T he average values of expected and observed heterozygosities were 0.266 and 0.123, respectively. T he polymorphic information content (PIC) values were observed in range of 0.026 to 0.549 with an average of 0.240. The genetic relatedness among the little millet accessions was evaluated by neighbor-joining dendrogram, which grouped all accessions into two distinct groups. The validation thus demonstrated the utility of the switchgrass EST - SSR markers in assessing genomic relationships in little millet. T he findings from this study could be useful for designing strategies for the identification of diverse germplasm for conservation and future molecular breeding programs for little millet.

• Fisheries and Aquatic Sciences
• /
• v.5 no.3
• /
• pp.183-190
• /
• 2002

To determine the effect of body size on the clearance rate and ingestion rate of small intertidal bivalves, Glauconome chinensis, feeding experiments were conducted on individuals of 12 different size classes, from 4 to 16 mm in shell length. Relationships between morphological parameters were also determined. The clearance and ingestion rates of G. chinensis responded similarly to their body size, ranging from 1.3 to 28.2 mL/hr/ind. and from 24.0 to 458.5, ${\mu}gC/hr/ind$., respectively. Both rates increased significantly (p<0.001) as shell length increased from 4 to 9 mm, although neither rate changed significantly when shell length was in the range from 12 to 16 mm. The weight-specific clearance rate $(CR_w)$ and ingestion rate $(IR_w)$ decreased with increasing body size, with values from 1.0 to 3.1 L/hr/g and from 17.9 to 51.3 mgC/hr/g, respectively. The $CR_w$ of G. chinensis was intermediate compared to those of larger bivalve species. The clearance rate (CR) relative to flesh dry weight (FDW) of G. chinensis were fitted well to the power function: $CR=0.43\times(FDW)^{0.71}\;(r^2=0.89)$. The exponent of fitting equation (0.71) of G. chinensis was higher than those of Mytilus edulis (Walne, 1972), Crassostrea gigas (Walne, 1972), and Placopecten magellanicus (MacDonald and Thompson, 1986).

• Membrane Journal
• /
• v.1 no.1
• /
• pp.34-43
• /
• 1991

The relationships between affinity of membranes and optimum operation conditions were investigated in the pervaporation of water(1)/ethanol(2) mixture through cellulose acetate(CA) membranes having more affinity to water and silicone rubber(SR) membranes having more affinity to ethanol. CA and SR membranes were prepared and amount of sorption, sorption selectivity, pervaporation separation factor and pervaporation rate in both of membranes were determined and compared. The effects of downstream pressure were analyzed using Thompson diagram and the sorption and pervaporation characteristics with composition of feed and operation temperature were examined in terms of affinity, activity coefficient, plasticizing effect and activation energy of individual species. In the separation of water through CA membranes, high performance of both pervaporation separation factor (water to ethanol, $[\alpha^2_1]_{PV}$) and pervaporation rate was obtained in the conditions of low downstream pressure, middle range of feed concentration and high temperature. In the separation of ethanol through SR membranes, pervaporation separation factor(ethanol to water, $[\alpha^2_1]_{PV}$) increased with downstream pressure and decreased with concentration of ethanol in feed and operation temperature, while pervaporation rate showed opposite trends to those of ($[\alpha^2_1]_{PV}$).