• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.752-761
• /
• 2016

Hyperspectral images are often contaminated with stripe noise, which severely degrades the imaging quality and the precision of the subsequent processing. In this paper, a variational model is proposed by employing spectral-spatial adaptive unidirectional variation and a sparse representation. Unlike traditional methods, we exploit the spectral correction and remove stripes in different bands and different regions adaptively, instead of selecting parameters band by band. The regularization strength adapts to the spectrally varying stripe intensities and the spatially varying texture information. Spectral correlation is exploited via dictionary learning in the sparse representation framework to prevent spectral distortion. Moreover, the minimization problem, which contains two unsmooth and inseparable $l_1$-norm terms, is optimized by the split Bregman approach. Experimental results, on datasets from several imaging systems, demonstrate that the proposed method can remove stripe noise effectively and adaptively, as well as preserve original detail information.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.59-64
• /
• 2007

데이타 중심 센서 네트워크에서는 측정된 데이타의 값에 따라 데이타를 저장하는 센서 노드가 결정되기 때문에 같은 값을 갖는 데이타가 빈번하게 발생하면 이를 저장하는 센서 노드에 부하가 집중되어 에너지가 빠르게 고갈되는 문제가 있다. 또한 센서 네트워크가 확장되면 데이타 저장 및 질의 처리시 목적 센서 노드로의 라우팅 거리가 멀어져 통신 비용이 증가되는 문제가 있다. 그러나 기존 연구들은 데이타 저장의 효율적인 관리에만 치우쳐 이와 같은 문제를 효율적으로 해결하지 못하고 있다. 본 논문에서는 이러한 문제를 해결하기 위해 비균등 네트워크 분할(Non-Uniform Network Spilt: NUNS) 기법을 제안한다. NUNS는 센서 네트워크를 센서 노드 개수와 분할된 영역 크기 차이가 최소가 되도록 비균등 크기의 Partition으로 분할하고 각 Partition에서 발생한 데이타를 그 Partition 내의 센서 노드가 저장 관리함으로써 센서 노드의 데이타 저장 부하를 분산시키고, 센서 네트워크의 확장에 따른 통신 비용을 줄인다. 그리고 NUNS는 각 Partition을 분할된 영역 크기 차이가 최소가 되도록 센서 노드 개수만큼 비균등하게 Zone으로 분할함으로써 센서 노드가 없는 Zone으로 인해 센서 노드에 부하가 집중되는 것을 막고 불필요한 라우팅 비용을 줄인다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.528-531
• /
• 2004

For a simple one-dimensional ignition problem a mathematical model is described to investigate the difficulties in numerical simulations. Some computation results are obtained and comparison is made with analytical solution. Discussions are made on topics such as 1) coordinate transformation, 2) gas-phase and solid-phase analysis; (divergence form of the governing system, a finite-volume discretization, implicit time integration, upwind split flux, spatial accuracy improvement are described. Mass, reagent mass, and energy conservations are solved.), and 3) method to determine quantities on the burning surface (matching). Results obtained for small values of the non-dimensional pressure show a steady-combustion and good agreement with the analytical solution. Numerical instability appeared for larger values of the pressure, discussion on the cause of the problem is made. This effort is a part of a study of flame spread phenomena on solid propellant surface.

• Current Optics and Photonics
• /
• v.5 no.2
• /
• pp.191-197
• /
• 2021

The anomalous propagation characteristics of a single Airy beam in nonlocal nonlinear medium are investigated by utilizing the split-step Fourier-transform method. We show that besides the normal straight propagation trajectory, the breathing solitons formed by the interaction between Airy beam and nonlocal nonlinear medium can propagate along the sinusoidal trajectory, and the anomalous trajectory can be modulated arbitrarily by altering the initial amplitude and the nonlocal nonlinear coefficient. In addition, the initial amplitude and the nonlocal nonlinear coefficient can have inverse impacts on the formation and transformation of the equilibrium state of spatial solitons, when the two parameters are larger than certain values. Therefore, the reversible transformation of the evolution dynamics of two soliton states can be realized by adjusting those two parameters properly. Finally, it is shown that the propagation properties of the solitons formed by the interaction between Airy beam and nonlocal nonlinear medium can be controlled arbitrarily, by adjusting the distribution factor and nonlocal coefficient.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.11
• /
• pp.3479-3492
• /
• 2022

Longitudinal quantification of brain changes due to development, aging or disease plays an important role in the filed of personalized-medicine applications. However, due to the temporal variability in shape and different imaging equipment and parameters, estimating anatomical changes in longitudinal studies is significantly challenging. In this paper, a longitudinal Magnetic Resonance(MR) brain image segmentation algorithm proposed by combining intensity information and anisotropic smoothness term which contain a spatial smoothness constraint and longitudinal consistent constraint into a variational framework. The minimization of the proposed energy functional is strictly and effectively derived from a fast optimization algorithm. A large number of experimental results show that the proposed method can guarantee segmentation accuracy and longitudinal consistency in both simulated and real longitudinal MR brain images for analysis of anatomical changes over time.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.150-160
• /
• 2005

In this study, the spatiotemporal surface temperature changes were analyzed in the Korean peninsula. The surface temperature variation was estimated using the split window method and NOAA/AVHRR data in 1991, 1995 and 2000. The ranges of differences in temperature between day time and night time were $3-15^{\circ}C$ around the peninsula. The differences in seasonal variations and yearly fluctuations in big cities were lower than those in rural areas and showed clearly the effects of the urbanization. The characteristics of urban heat affects were further determined based on the day and night time temperature comparison on Busan metropolitan area between these periods. Finally, the future use of this technology was suggested for the urban environmental planning.

• Journal of KIISE
• /
• v.41 no.10
• /
• pp.792-798
• /
• 2014

In spatial databases, R-tree is one of the most widely used indexing structures and many variants have been proposed for its performance improvement. Among these variants, Hilbert R-tree is a representative method using Hilbert curve to process large amounts of data without high cost split techniques to construct the R-tree. This Hilbert R-tree, however, is hardly applicable to large-scale applications in practice mainly due to high pre-processing costs and slow bulk-load time. To overcome the limitations of Hilbert R-tree, we propose a novel approach for parallelizing Hilbert mapping and thus accelerating bulk-loading of Hilbert R-tree on GPU memory. Hilbert R-tree based on GPU improves bulk-loading performance by applying the inversed-cell method and exploiting parallelism for packing the R-tree structure. Our experimental results show that the proposed scheme is up to 45 times faster compared to the traditional CPU-based bulk-loading schemes.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.1
• /
• pp.207-224
• /
• 2015

The purpose of this study is to review the various valuation techniques of intangible assets. The value of intangible asset by the income approach can be measured as the present value of the economic benefit over the intangible asset's remaining useful life. The typical methods used in intangible asset economic income projections include extrapolation method, life cycle analyses, sensitivity analyses, simulation analyses, judgment method, and tabula rasa method. There are several methods available for estimating capitalization rates and discount rates for intangible asset, in which we have discussed market extraction method, capital asset pricing model, built-up method, discounted cash flow model, and weighted average cost of capital method. As the capitalization methods for intangible asset, relief-from-royalty method, excess earnings capitalization method, profit split method, residual from business enterprise method, postulated loss of income method and so on have been reviewed.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.235-238
• /
• 1995

In this paper, we propose an effective coding method of the angiography by using the scalable structure in the frequency domain for MPACS(Medical Picture Archiving and Communication System). We employed the subband decomposition method and MPEG-2 system which is the international standard coding method of the general moving picture. After the subband decomposition is applied to split an input image into 4 bands in the spatial frequency domain, the motion compensated DPCM coding method of MPEG-2 is carried out for each subband. As a result, an easily controllable coding Structure is accomplished by composing the compound hit stream for each subband group. Follows are the simulation results of the proposed sheme for the angiography. A scalable structure which can be easily controlled for a loss of transmission or the band limit can be accomplisbed in the MPEG-2 stucture by the subband decomposition minimizing the side information. And by reducing the search area of the motion vector between -4 and 3, the processing speed of a codec is enhanced by more than two times without a loss of the picture quality compare with the conventional DCT coefficients decompositon method. And the processing speed is considerably improved in the case of the parallel construction of each subband in the hardware.

• Ocean and Polar Research
• /
• v.30 no.1
• /
• pp.79-87
• /
• 2008

Hydroacoustic technique was used to analyze spatiotemporal stability and distribution of demersal fish aggregations in the coastal region to overcome some limitations of the existing methods such as net and diving. The survey was carried out in the Baekeum Bay on the south coast of Korea in January 2007. The bottom depth in the study site ranges from 7 to 25 m. In order to outline aggregations of demersal fish initial scanning using 200 kHz split-beam transducer was randomly conducted over the large area. Having detected fish aggregation in the specific region, intensive acoustic survey of irregular star pattern was carried out along 14 transects across the area in question. The results of the acoustic survey show that all demersal fish aggregations are concentrated about 5 m from sea bottom having a slight slope and remain steady with no spatial or temporal variations during acoustic survey. The hydroacoustic method used in this study offers a new approach to understand vertical and horizontal distribution, spatiotemporal stability, and biomass estimate of demersal fish aggregations in coastal regions. Additionally, the number of individual fish estimated from in situ acoustic target strength data can be used to understand the standing stock of demersal fish aggregation.