• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.119-129
• /
• 2010

The joint use of remotely sensed data and field measurements has been widely used to estimate aboveground carbon stock in many countries. Recently, Korea Forest Research Institute has developed new carbon emission factors for kind of tree, thus more accurate estimate is possible. In this study, the aboveground carbon stock of Danyang area in South Korea was estimated using k-Nearest Neighbor(kNN) algorithm with the 5th National Forest Inventory(NFI) data. Considering the spectral response of forested area under the climate condition in Korea peninsular which has 4 distinct seasons, Landsat TM seasonal satellite images were collected. As a result, the estimated total carbon stock of Danyang area was ranged from 3542768.49tonC to 3329037.51tonC but seasonal trends were not found.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.885-888
• /
• 2000

Among the previous searching methods, there are the typical methods such as full search and three-step search, etc. Block motion estimation using exhaustive search is too computationally intensive. To apply in practice, recently proposed fast algorithms have been focused on reducing the computational complexity by limiting the number of searching points. According to the reduction of searching points, the quality performance is aggravated in those algorithms. In this paper, We present a fast and efficient search algorithm for block motion estimation that produces better quality performance and less computational time compared with a three-step search (TSS). Previously the proposed Two Step Search Algorithm (TWSS) by Fang-Hsuan Cheng and San-Nan sun is based on the ideas of dithering pattern for pixel decimation using a part of a block pixels for BMA (Block Matching Algorithm) and multi-candidate to compensate quality performance with several locations. This method has good quality performance at slow moving images, but has bad quality performance at fast moving images. To resolve this problem, the proposed algorithm in this paper considers spatial and temporal correlation using neighbor and previous blocks to improve quality performance. This performance uses neighbor motion vectors and previous motion vectors in addition, thus it needs more searching points. To compensate this weakness, the proposed algorithm uses statistical character of dithering matrix. The proposed algorithm is superior to TWSS in quality performance and has similar computational complexity

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.103-110
• /
• 2005

The performance of maximum likelihood(ML) detection for the given channel is analyzed in spatially multiplexed MIMO system. In order to obtain the vector symbol error rate, we define error vectors which represent the geometrical relation between lattice points. The properties of error vectors are analyzed to show that all lattice points in infinite lattice almost surely have four nearest neighbors after random channel transformation. Using this information and minimum distance obtained by the modified sphere decoding algorithm, we formulate the analytical performance of vector symbol error over the given channel. To verify the result, we simulate ML performance over various random channel which are classified into three categories: unitary channel, dense channel, and sparse channel. From the simulation results, it is verified that the derived analytical result gives a good approximation about the performance of ML detector over the all random MIMO channels.

• The KIPS Transactions:PartD
• /
• v.12D no.5 s.101
• /
• pp.673-682
• /
• 2005

Distance browsing queries, namely k-nearest neighbor queries, are the most important queries in spatial database applications, e.g., Geographic Information Systems(GISs). Recently, GIS applications trends to extend themselves toward wide multi-user environments such as the Web. Since many techniques for such queries, where Hjaltason and Samet's algorithm is the most efficient one, were optimized for only one query, we need to complement them suitable for multi-user environments. It can be a good approach that we store many individual query results in a cache, i.e., query result caching and reuse them in evaluating incoming queries, j.e., query result matching. In this paper, we propose a complementary Hjaltason and Samet's algerian capable of reusing previous query results in a cache for answering distance browsing queries in multi-user GIS environments. Our experimental results conform the efficiency of our approach.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.57-67
• /
• 1995

The study on the factorial ecology of the residential patterns is to provide one of the yardsticks for description and comparison of urban structures. Many Korean geographers have adopted this method to analyse the urban structure of Korean cities. According to these studies, one of the main factors in Korean cities in large and middle sizes is family status. The spatial pattern of family status is zonal, similar to the cases of Japanese and Western cities. The age is one of the principal indices of familyf status, hence the author chose the age composition to analyse the residential patten. This Paper is to describe the residential segreagation pattern due to age composition and recent pattern changes in the Cheongju city, and than to explain the reason for these changes. All data are derived from the Population Censuses of Korea for 1970, 1980 and 1990. Eighteen groups of age with five-year interval (0-4, 5-9, 10-14, 15-19, 20-24, 25-29, 30-34, 35-39, 40-44, 45-49, 50-54, 55-59, 60-64, 65-69, 70-74, 75-79, 80-84, 85- and- over) are adopted here. Unit area for this analysis is administrative district(Dong) within Cheonaju city. District are classified into smaller groups based on the similarity of age composition, using the method of cluster analysis. The main findings are summarized as follows: 1. Population have increased remarkably in the eastern reaion neighboring CBD of Cheongju city in 1970's. And in western region from CBD new residential area have developed in 1980's. 2. Spatial pattarns showed a concentric circle type in central district and its neighbor regions and a sector type in periphery regions in 1970; a cirele type in central district and a sector typesin neighbor regions and periphery regions in 1980 and 1990. Thess residential pattern play an important role in the population composition ratio of younger aged group (l5-34) and older aged group (65-and-over). 3. Spatial change of types by age composition showed the higher ratio of groups of 0-9 and 35-49, and lower ratio of group 20-24 in 1970's. Dominent groups are ratio of 0-14, 40-49, 55-64, 7O-79, and 85- and- over in 1980's. These changes mainly appeared in central district and periphery regions. 4. The reasons for the change of age composition was the development of msnufacturing industries with the increase of population and new construction of residential areas both in the neighbor regions of cnetral district and periphery regions. These phenomena were caused by immigration of younger aged groups and increasing of residents of aged groups in these regions.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.47-54
• /
• 2017

Recently, there are many studies related aerial mapping project and 3 dimensional shape and model reconstruction using UAV(unmanned aerial vehicle) system and images. In this study, we create 3D reconstruction point data using image matching technology of the UAV overlap images, detect shape change of structure and perform accuracy assessment of area($m^2$) and volume($m^3$) value. First, we build the test structure model data and capturing its images of shape change Before and After. Second, for post-processing the Before dataset is convert the form of raster format image to ensure the compare with all 3D point clouds of the After dataset. The result shows high accuracy in the shape change of more than 30 centimeters, but less is still it becomes difficult to apply because of image matching technology has its own limits. But proposed methodology seems very useful to detect illegal any structures and the quantitative analysis of the structure's a certain amount of damage and management.

• Journal of Korean Society of Forest Science
• /
• v.101 no.4
• /
• pp.547-557
• /
• 2012

This study purposed to estimate the forest biomass using k-Nearest Neighbor (k-NN) algorithm. Multiple data sources were used for the analysis such as forest type map, field survey data and Landsat TM data. The accuracy of forest biomass was evaluated with the forest stratification, horizontal reference area (HRA) and spatial filtering. Forests were divided into 3 types such as conifers, broadleaved, and Korean pine (Pinus koriansis) forests. The applied radii of HRA were 4 km, 5 km and 10 km, respectively. The estimated biomass and mean bias for conifers forest was 222 t/ha and 1.8 t/ha when the value of k=8, the radius of HRA was 4 km, and $5{\times}5$ modal was filtered. The estimated forest biomass of Korean pine was 245 t/ha when the value of k=8, the radius of HRA was 4km. The estimated mean biomass and mean bias for broadleaved forests were 251 t/ha and -1.6 t/ha, respectively, when the value of k=6, the radius of HRA was 10 km. The estimated total forest biomass by k-NN method was 799,000t and 237 t/ha. The estimated mean biomass by ${\kappa}NN$method was about 1t/ha more than that of filed survey data.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.374-380
• /
• 2012

The k-Nearest Neighbor (kNN) technique is popularly applied to assess forest resources at the county level and to provide its spatial information by combining large area forest inventory data and remote sensing data. In this study, two approaches such as distance-weighting and stratification of training dataset, were compared to improve kNN-based forest growing stock estimates. When compared with five distance weights (0 to 2 by 0.5), the accuracy of kNN-based estimates was very similar ranged ${\pm}0.6m^3/ha$ in mean deviation. The training dataset were stratified by horizontal reference area (HRA) and forest cover type, which were applied by separately and combined. Even though the accuracy of estimates by combining forest cover type and HRA- 100 km was slightly improved, that by forest cover type was more efficient with sufficient number of training data. The mean of forest growing stock based kNN with HRA-100 and stratification by forest cover type when k=7 were somewhat underestimated ($5m^3/ha$) compared to statistical yearbook of forestry at 2011.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.81-87
• /
• 2016

It is important to analyze the exact damage information for fast recovery when natural disasters cause damage on river-side facilities such as dams, bridges, embankments etc. In this study, we shows the method to effectively damage analysis plan using UAV(Unmanned aerial vehicle) images and accuracy assessment of it. The UAV images are captured on area near the river-side facilities and the core methodology for damage analysis are image matching and change detection algorithm. The result(point cloud) from image matching is to construct 3-dimensional data using by 2-dimensional images, it extracts damage areas by comparing the height values on same area with reference data. The results are tested absolute locational precision compared by post-processed aerial LiDAR data named reference data. The assessment analysis test shows our matching results 10-20 centimeter level precision if external orientation parameters are very accurate. This study shows suggested method is very useful for damage analysis in a large size structure like river-side facilities. But the complexity building can't apply this method, it need to the other method for damage analysis.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.317-327
• /
• 2008

Go-Yang city, rural region by the 1980s, had rapidly grown to the big city for only 15 years because of Il-San new town development which was developed during $1990{\sim}1995$. So the population and industrial function were greatly increased too. The change of urban spatial structure was grasped by tracing the distribution of population, household and industries of Go-Yang city during $1990{\sim}2005$. The new urban center had grown to the center of the whole city, while the industries of existing centers were extended to the neighbor areas. The existing centers had been changed into 3 types - (1) changed into a part of new urban center, (2) declined to sub-center with small merchant facilities. (3) continuously grown with the development of whole city. As a result, a new town development had changed the urban structure by creating new functional relationships among the existing and new centers rather the existing centers had declined.