• 제목/요약/키워드: spatial interpolation.

검색결과 410건 처리시간 0.037초

지표피복 데이터와 지리가중회귀모형을 이용한 인구분포 추정에 관한 연구 (Locally adaptive intelligent interpolation for population distribution modeling using pre-classified land cover data and geographically weighted regression)

  • 김화환
    • 한국지역지리학회지
    • /
    • 제22권1호
    • /
    • pp.251-266
    • /
    • 2016
  • 데시메트릭 매핑은 행정구역 단위로 집계된 인구자료를 행정구역 내부의 공간적 변이에 따라 재집계하여 고해상도의 인구분포 자료를 작성하는 가장 보편적인 기법이다. 본 연구에서는 데시메트릭 매핑을 이용한 인구분포 추정의 장단점을 검토하고, 그 개선방안으로서 지리가중회귀모형을 이용한 다변량 데시메트릭 매핑 기법을 제안하였다. 기존의 지표피복 데이터와 인구센서스 자료를 기반으로 지리가중회귀모형을 적용하여 각 집계단위별로 지표피복 유형과 인구밀도의 상관관계를 분석하고, 모형에서 산출된 회귀계수를 이용해 하위 공간구획의 인구 총수를 산정하였다. 그 결과 지리가중회귀모형 기반 다변량 데시메트릭 매핑 기법을 이용했을 때, 면적가중 보간법, 이진 데시메트릭 매핑, 피크노필렉틱 보간법, 최소자승회귀모형 기반 데시메트릭 매핑 기법 등 다른 지능형 보간법에 비해 정확한 인구분포 추정이 가능하다는 것을 확인하였다. 이는 지리가중회귀모형을 통해서 인구센서스 집계 단위별로 상이한 구역 내 공간적 이질성이 인구분포 추정에 적절히 반영되었기 때문인 것으로 평가할 수 있다.

  • PDF

산악지대의 일 최저기온 공간내삽모형 (A Spatial Interpolation Model for Daily Minimum Temperature over Mountainous Regions)

  • 윤진일;최재연;윤영관;정유란
    • 한국농림기상학회지
    • /
    • 제2권4호
    • /
    • pp.175-182
    • /
    • 2000
  • 표준관측소의 점 단위 기온 관측 및 예보값을 농업분야에서 활용하기 위해서는 공간내삽이 필요한 경우가 많지만 기후학적 평년값 같은 장기간의 평균값 내삽과는 달리 지형효과를 반영하기 어려워 거리역산가중법이 수정 없이 사용되고 있다. 우리 나라처럼 지형이 복잡한 산악지역에서는 수평 거리에만 의존한 내삽 결과에 심각한 오류가 포함될 수 있으므로, 영농지원 정보로서 중요한 일 최저기온을 대상으로 추정오차의 최대근원인 해발고도의 영향을 보정 할 수 있는 간단한 공간내삽모형을 작성하였다. 먼저 남한 육지 상에 위치한 63개 표준관측소에서 수집된 일 최저기온자료와 관측소의 위치, 해안으로부터 거리, 경사향, 표고 등 국지기온 결정인자를 회귀분석 하여 표고에 따른 기온감율 추정식을 날짜의 함수로 표현하였다. 63개 관측점의 표고값을 공간내삽 하여 재구성한 전국의 가상 지형으로부터 1 km$\times$ 1 km 공간단위의 전국 수치고도값 편차를 계산하고, 여기에 해당 날짜의 기온감율을 적용하여 보정값을 계산한다. 기존의 거리역산가중법에 의한 기온추정값을 이 보정값에 의해 수정함으로써 최종 기온값을 얻는다. 임의로 선발된 1999년의 월별 하루씩 총 12일에 대하여 이 모형과 기존 거리역산가중법을 각기 적용하여 267개 자동기상관측지점의 일 최저기온을 추정한후 실측값과 비교하였다 오차평균, 절대오차평균, 그리고 평방근오차평균 등 세가지 추정오차를 분석한 결과 이 방법이 거리역산가중법에 비해 산악지역에서의 일 최저기온 추정에 있어 뚜렷한 개선효과를 보였다.

  • PDF

공간 및 시간 정확도 향상을 위한 최적의 삽간영역 구성에 관한 연구 (A Study of Optimal Mesh Interface Region Generation to Improve Spatial and Temporal Accuracy)

  • 조금원
    • 한국전산유체공학회지
    • /
    • 제8권3호
    • /
    • pp.41-49
    • /
    • 2003
  • The spatial accuracy becomes first-order when second-order conservation schemes including the non-conservative interpolation in general Chimera method are used. To ensure the solution accuracy, the discontinuities must be located away from the overlapped regions, and the length of overlapped region also must be proportional to the grid spacing. In this paper, a proposed method, cut-paste algorithm, is used to satisfy above constraints. The cut-paste algorithm can generate the optimal mesh inteface region automatically, To validate the spatial and temporal accuracy due to the non-conservative interpolation, inviscid and viscous problems are tested.

공간기후모형을 이용한 농업기상정보 생산 (Visualization of Local Climates Based on Geospatial Climatology)

  • 윤진일
    • 한국농림기상학회지
    • /
    • 제6권4호
    • /
    • pp.272-289
    • /
    • 2004
  • The spatial resolution of local weather and climate information for agronomic practices exceeds the current weather service scale. To supplement the insufficient spatial resolution of official forecasts and observations, gridded climate data are frequently generated. Most ecological models can be run using gridded climate data to produce ecosystem responses at landscape scales. In this lecture, state of the art techniques derived from geospatial climatology, which can generate gridded climate data by spatially interpolating point observations at synoptic weather stations, will be introduced. Removal of the urban effects embedded in the interpolated surfaces of daily minimum temperature, incorporation of local geographic potential for cold air accumulation into the minimum temperature interpolation scheme, and solar irradiance correction for daytime hourly temperature estimation are presented. Some experiences obtained from their application to real landscapes will be described.

A Web-based Information System for Plant Disease Forecast Based on Weather Data at High Spatial Resolution

  • Kang, Wee-Soo;Hong, Soon-Sung;Han, Yong-Kyu;Kim, Kyu-Rang;Kim, Sung-Gi;Park, Eun-Woo
    • The Plant Pathology Journal
    • /
    • 제26권1호
    • /
    • pp.37-48
    • /
    • 2010
  • This paper describes a web-based information system for plant disease forecast that was developed for crop growers in Gyeonggi-do, Korea. The system generates hourly or daily warnings at the spatial resolution of $240\;m{\times}240\;m$ based on weather data. The system consists of four components including weather data acquisition system, job process system, data storage system, and web service system. The spatial resolution of disease forecast is high enough to estimate daily or hourly infection risks of individual farms, so that farmers can use the forecast information practically in determining if and when fungicides are to be sprayed to control diseases. Currently, forecasting models for blast, sheath blight, and grain rot of rice, and scab and rust of pear are available for the system. As for the spatial interpolation of weather data, the interpolated temperature and relative humidity showed high accuracy as compared with the observed data at the same locations. However, the spatial interpolation of rainfall and leaf wetness events needs to be improved. For rice blast forecasting, 44.5% of infection warnings based on the observed weather data were correctly estimated when the disease forecast was made based on the interpolated weather data. The low accuracy in disease forecast based on the interpolated weather data was mainly due to the failure in estimating leaf wetness events.

GIS를 활용한 해양환경관리에 관한 연구 I - LDI 알고리즘 적용을 위한 보간법에 관한 연구 - (A Study on the GIS for The Sea Environmental Management I - Focus on the Study of A Interpolation on The Application of LDI Algorism -)

  • 이형민;박기학
    • 환경영향평가
    • /
    • 제15권6호
    • /
    • pp.443-452
    • /
    • 2006
  • Today, satellite remote sensing (RS) and geographic information systems (GIS) plays an important role as an advanced science and technology. This study was developed a Line Density Algorithm which was clarify and describe the thermal front by using NOAA SST (sea surface temperature) and GIS spatial analysis for systemic and effective management of fish raising industry and sea environmental pollution by land reclamation program. Before this, a study about a interpolation method was carry out which was very important for estimate the hidden value between a special point. For this study Inverse Distance Weighted interpolation, Spline interpolation, Kriging interpolation methods were choose and SST data from 2001 to 2004 in spring (March, April, May) were analyzed. According to the study Kriging interpolation method was the very adaptive method from a practical point of view and excellent in description and precision then others. Finally, the result of this study will be use for develope the Line Density Index Algorism.

광양만권 주변지역 주민들의 대기오염 노출추정을 위한 방법론 비교 연구 (Comparison of Exposure Estimation Methods on Air Pollution of Residents of Industrial Complexes)

  • 정순원;조용성;양원호;유승도;손부순
    • 한국환경과학회지
    • /
    • 제22권2호
    • /
    • pp.151-161
    • /
    • 2013
  • The assessment of personal exposure is a critical component in population-based epidemiologic studies of air pollution. This study was conducted to apply and compare the four exposure estimation methods of individual-level to air pollution concentration in a cohort including 2,283 subjects in Gwangyang, Korea. Individual-level exposure of air pollution were estimated using multiple approaches, including average across all monitors, nearest monitor, and spatial interpolation by inverse distance weighting and kriging. The mean concentrations of $PM_{10}$, $NO_2$, $SO_2$, CO, $O_3$ by four exposure estimation methods were slightly different but not significantly different from each other. Cross-validation showed that kriging was more accurate than other exposure estimation methods because kriging has probably predicted individual exposure levels equivalent to residential locations after estimating the parameters of a model according to the spatial surface of air pollution concentration. These data support that spatial interpolation methods may provide better estimates than selecting the value from the nearest monitor and averaging across values from all monitors by reflecting spatial attributes of air pollution on personal level.

경기북부지역 정밀 수치기후도 제작 및 활용 - I. 수치기후도 제작 (Development and Use of Digital Climate Models in Northern Gyunggi Province - I. Derivation of DCMs from Historical Climate Data and Local Land Surface Features)

  • 김성기;박중수;이은섭;장정희;정유란;윤진일
    • 한국농림기상학회지
    • /
    • 제6권1호
    • /
    • pp.49-60
    • /
    • 2004
  • Northern Gyeonggi Province(NGP), consisting of 3 counties, is the northernmost region in South Korea adjacent to the de-militarized zone with North Korea. To supplement insufficient spatial coverage of official climate data and climate atlases based on those data, high-resolution digital climate models(DCM) were prepared to support weather- related activities of residents in NGP Monthly climate data from 51 synoptic stations across both North and South Korea were collected for 1981-2000. A digital elevation model(DEM) for this region with 30m cell spacing was used with the climate data for spatially interpolating daily maximum and minimum temperatures, solar irradiance, and precipitation based on relevant topoclimatological models. For daily minimum temperature, a spatial interpolation scheme accommodating the potential influences of cold air accumulation and the temperature inversion was used. For daily maximum temperature estimation, a spatial interpolation model loaded with the overheating index was used. Daily solar irradiances over sloping surfaces were estimated from nearby synoptic station data weighted by potential relative radiation, which is the hourly sum of relative solar intensity. Precipitation was assumed to increase with the difference between virtual terrain elevation and the DEM multiplied by an observed rate. Validations were carried out by installing an observation network specifically for making comparisons with the spatially estimated temperature pattern. Freezing risk in January was estimated for major fruit tree species based on the DCMs under the recurrence intervals of 10, 30, and 100 years, respectively. Frost risks at bud-burst and blossom of tree flowers were also estimated for the same resolution as the DCMs.

기상자료 공간내삽과 작물 생육모의기법에 의한 전국의 읍면 단위 쌀 생산량 예측 (Yield and Production Forecasting of Paddy Rice at a Sub-county Scale Resolution by Using Crop Simulation and Weather Interpolation Techniques)

  • 윤진일;조경숙
    • 한국농림기상학회지
    • /
    • 제3권1호
    • /
    • pp.37-43
    • /
    • 2001
  • Crop status monitoring and yield prediction at higher spatial resolution is a valuable tool in various decision making processes including agricultural policy making by the national and local governments. A prototype crop forecasting system was developed to project the size of rice crop across geographic areas nationwide, based on daily weather pattern. The system consists of crop models and the input data for 1,455 cultivation zone units (the smallest administrative unit of local government in South Korea called "Myun") making up the coterminous South Korea. CERES-rice, a rice crop growth simulation model, was tuned to have genetic characteristics pertinent to domestic cultivars. Daily maximum/minimum temperature, solar radiation, and precipitation surface on 1km by 1km grid spacing were prepared by a spatial interpolation of 63 point observations from the Korea Meteorological Administration network. Spatial mean weather data were derived for each Myun and transformed to the model input format. Soil characteristics and management information at each Myun were available from the Rural Development Administration. The system was applied to the forecasting of national rice production for the recent 3 years (1997 to 1999). The model was run with the past weather data as of September 15 each year, which is about a month earlier than the actual harvest date. Simulated yields of 1,455 Myuns were grouped into 162 counties by acreage-weighted summation to enable the validation, since the official production statistics from the Ministry of Agriculture and Forestry is on the county basis. Forecast yields were less sensitive to the changes in annual climate than the reported yields and there was a relatively weak correlation between the forecast and the reported yields. However, the projected size of rice crop at each county, which was obtained by multiplication of the mean yield with the acreage, was close to the reported production with the $r^2$ values higher than 0.97 in all three years.

  • PDF