• 제목/요약/키워드: spatial coupling

검색결과 136건 처리시간 0.022초

Fuzzy-LP와 GIS의 결합을 통한 토지의 최적 이용문제 (Optimized Land Use by Integrated Use of Fuzzy-LP and GIS)

  • 전철민
    • 한국측량학회지
    • /
    • 제20권3호
    • /
    • pp.273-282
    • /
    • 2002
  • GIS는 다양한 영역에서 유용한 도구로서 자리잡고 있으나, 한편으로는, 복잡한 문제를 해결하기 위해서는 GIS가 수학, 공학적인 모델링툴과 결합되는 것이 필요하다는 견해와 연구결과가 등장하고 있다. LP(Linear Programming)는 주어진 자원을 최적으로 배분하는 문제에 사용되는 수학적인 기법이다. LP는 공간적인 표현을 포함하지 않기때문에 GIS의 기능들과 결합될 때 그 유용성이 높아질 수 있다. 그러나 전통적인 LP는 명료하게 조건이 주어질 경우에만 적합한 방법이므로, 토지이용계획과 같이 결정요소가 명확한 값으로 주어질 수 없는 경우에는 현실적으로 적용하기 어려워진다. 이 연구에서는, 이와 같이 불명료한(fuzzy) 상황을 다루기 위해 Fuzzy logic을 사용한 fuzzy-LP를 개발하고, 이를 GIS와 통합하는 방법론을 제시한다. 통합시스템에서 GIS는 Fuzzy-LP과정으로 데이터를 공급하거나 Fuzzy-LP의 결과값을 표현하는데 이용된다. 이 시스템을 토지이용배분문제에 적용하는 경우를 예시하였다.

고효율 및 높은 격리 특성을 갖는 Ka 대역 도파관 결합기 설계 및 제작 (Design and Fabrication of Ka-band Waveguide Combiner with High Efficiency and High Isolation Characteristics)

  • 김효철;조흥래;이주흔;이덕재;안세환;이만희;주지한;김홍락
    • 한국인터넷방송통신학회논문지
    • /
    • 제22권2호
    • /
    • pp.35-42
    • /
    • 2022
  • 본 논문에서는 SSPA(Solid state amplifier) 의 핵심 모듈인 결합기의 효율 및 격리 특성을 높이는 방법에 대해 연구하였다. 구체적으로 도파관 결합기에서 공용 포트와 격리 포트 정합을 이루어 격리도를 확보 하였다. 정합을 위한 매칭 구조는 원형 디스크 형태로 도파관 결합기 내부에서 음각으로 가공하게 된다. 구조는 매우 단순하여 안정적인 성능 확보가 가능하다. 그리고 이러한 구조는 이전 연구 대비 60배 이상의 높은 임계전력 성능을 보여 고출력에 적합함을 확인하였다. 그리고 1단의 T-junction과 2, 3단의 MagicT 결합기를 조합하여 소형화를 이루고, 삽입손실을 줄여 결합 효율을 최적화 하였다. 제작된 도파관 결합기는 16dB 이상의 격리도와 86.2% 의 결합 효율을 얻었다.

다량의 중수반사체 계통에 대한 2-점노 운동방정식 (TWO-Point Reactor Kinetics for Large D$_2$O Reflected Systems)

  • 노태완;오세기;김성년;김동훈
    • Nuclear Engineering and Technology
    • /
    • 제19권3호
    • /
    • pp.192-197
    • /
    • 1987
  • 다량의 중수반사체를 가진 조밀한 노심에서는 핵분열시 발생하는r선과 중수소와의 (r,n) 반응에 의해 지발 광중성자가 다량 생성되므로 이러한 계통을 기술하기 위하여 광중성자와 그 모핵종의 공간적 분리에 역점을 두어 2-점노 운동방정식을 정립하였다. 여러 반응도를 주입하여 출력 천이를 모사계산하므로써 노심과 반사체사이의 관련 효과를 조사하였다. 이 모델에 의한 모사계산 결과와 공간 종속 운동방정식에 의한 계산결과를 비교하였다. 반사체 영역에서의 광중성자 효과가 포함되므로써, 이를 포함하지 않은 모델에 비해 출력 천이현상을 감소시켰다. 실제로 출력을 측정하는 계측기는 이러한 공간적 분리영 향을 제거하기 위하여 노심 내부에 위치하여야 한다.

  • PDF

Analysis of LBLOCA of APR1400 with 3D RPV model using TRACE

  • Yunseok Lee;Youngjae Lee;Ae Ju Chung;Taewan Kim
    • Nuclear Engineering and Technology
    • /
    • 제55권5호
    • /
    • pp.1651-1664
    • /
    • 2023
  • It is very difficult to capture the multi-dimensional phenomena such as asymmetric flow and temperature distributions with the one-dimensional (1D) model, obviously, due to its inherent limitation. In order to overcome such a limitation of the 1D representation, many state-of-the-art system codes have equipped a three-dimensional (3D) component for multi-dimensional analysis capability. In this study, a standard multi-dimensional analysis model of APR1400 (Advanced Power Reactor 1400) has been developed using TRACE (TRAC/RELAP Advanced Computational Engine). The entire reactor pressure vessel (RPV) of APR1400 has been modeled using a single 3D component. The fuels in the reactor core have been described with detailed and coarse representations, respectively, to figure out the impact of the fuel description. Using both 3D RPV models, a comparative analysis has been performed postulating a double-ended guillotine break at a cold leg. Based on the results of comparative analysis, it is revealed that both models show no significant difference in general plant behavior and the model with coarse fuel model could be used for faster transient analysis without reactor kinetics coupling. The analysis indicates that the asymmetric temperature and flow distributions are captured during the transient, and such nonuniform distributions contribute to asymmetric quenching behaviors during blowdown and reflood phases. Such asymmetries are directly connected to the figure of merits in the LBLOCA analysis. Therefore, it is recommended to employ a multi-dimensional RPV model with a detailed fuel description for a realistic safety analysis with the consideration of the spatial configuration of the reactor core.

인체 뇌 대사물질에서의 In vitro 2D-COSY와 2D-NOESY 스펙트럼 분석 평가 (Evaluations of Spectral Analysis of in vitro 2D-COSY and 2D-NOESY on Human Brain Metabolites)

  • 최보영;우동철;김상영;최치봉;이성임;김은희;홍관수;전영호;정재준;김상수;임향숙
    • Investigative Magnetic Resonance Imaging
    • /
    • 제12권1호
    • /
    • pp.8-19
    • /
    • 2008
  • 목적 : 본 연구에서는 인체 뇌 대사물질에 대하여 2D MR 기술인 correlation spectroscopy (COSY) 와 nuclear Overhauser effect/enhancement spectroscopy (NOESY)를 직접 적용하고, 데이터를 획득하여 인체 뇌대사물질들간의 스칼라 짝지움 (coupling)과 쌍극자 (dipolar) 상호작용- NOE에 대한 분석을 통하여 결합연결관계 및 공간연결관계에 대한 정보를 획득하고자 하였다. 대상 및 방법 : 모든 2-D (dimensional) MR 실험 (즉, COSY와 NOESY)은 z축 능동차폐 펄스경사자장, 삼중공명 동결탐침기가 장착된 Bruker Avance 500 (11.8 T) 장비에서 298 K에 수행되었다. MRS상에서 뇌 대사물질과 유사하도록만든 희석액을 만들었고, 최종 MRS 샘플은 10% $D_2O$를 이용하였다. 2-D 스펙트라는 2048 복합 (complex) 데이터 포인트로서 총 320개 의 free induction decay (FID)를 평균화 (averaging)하였고, $H_2O$에서 얻어진 스펙트라는 8012 Hz 였다. 반복지연 (repetition delay) 시간은 2초, 각각의 FID는 4개의 평균화를 선택하였다. 얻어진 2D-COSY, 2D-NOESY 데이터는 Top Spin 2.0 소프트웨어에서 후 처리기법 (post-processing)에 의해 분석되었다. 분석 대상 대사물질은 N-acetyl aspartate (NAA), creatine (Cr), choline (Cho), glutamine (Gln), glutamate (Glu), myo-inositol (Ins), lactate (Lac)로서 총 7 가지 화학물로서 주요 목표 피크로 정했다. 결과 : 인체 뇌 대사물질에 대한 대칭형태의 2D-COSY와 2D-NOESY 스펙트럼을 획득하였고, COSY 스펙트럼상에서는 오직 1.0-4.5 ppm 사이에서만 교차피크들이 생성된 반면 NOESY 스펙트럼상에서는 1.0-4.5 ppm 외에도 7.9 ppm에서 공명 교차피크를 발견할 수 있었다. COSY 스펙트럼을 통하여 lactate에서 메틸 프로톤과 CH 프로톤의 COSY 크로스피크가 발견되었고, NAA에서 메틸렌 프로톤들간과 메틸렌 프로톤과 NH프로톤의 크로스피크가 발견되었고, Ins에서 CH 프로톤 들간의 크로스피크가 발견되었다. NOESY 스펙트럼을 통하여 NAA 분자내 NH 프로톤과 메틸 (-CH3) 프로톤과의 NOESY 크로스피크가 발견되었고, lactate에서 메틸 프로톤과 CH 프로톤과의 크로스피크가 발견되었고, Cr에서 메틸 프로톤과 메틸렌 프로톤과의 크로스피크가 발견되었고, Glu에서 메틸렌 프로톤 들간과 또한 메틸렌 프로톤과 CH 프로톤과의 크로스피크가 발견되었고, Gln에서 메틸렌 프로톤과 CH 프로톤과의 크로스피크가 발견되었고, Ins에서 CH 프로톤 들간의 크로스피크가 발견되었다. 결론 : 본 연구에서는 in vitro 상태의 인체 뇌 대사물질에 2D-COSY와 2D-NOESY 기술을 직접 적용하고, 결합연결관계 및 공간연결관계에 대한 정보를 성공적으로 획득하여 분석하여 보았다. 본 연구 결과물은 향후 인체 내 in vivo 2D-COSY를 이용한 뇌 대사물질 연구에 매우 유용하리라 사료된다.

  • PDF

유역오염원 수질거동해석을 위한 GIS기반 정보시스템 개발 (Development of Information System based on GIS for Analyzing Basin-Wide Pollutant Washoff)

  • 박대희;하성룡
    • 한국지리정보학회지
    • /
    • 제9권4호
    • /
    • pp.34-44
    • /
    • 2006
  • 환경모델링 기법은 비선형 오염유출현상을 구조화하여 배출특성 규명 및 정책대안의 영향예측 도구로서 활용도가 증가하고 있다. 반면 복잡한 입력 매개변수의 구성은 모형운영에 있어 비정량적 수치의 적용가능성을 내포하고 있다. 이러한 한계성을 극복하기 위해 최근 들어 GIS와 정보기술의 연계를 통한 자료관리 및 모형 매개변수 산출을 위한 연구들이 활발히 진행 중에 있다. 이에 본 연구의 목적은 NGIS사업을 통해 축척된 지형공간 자료와 GIS의 공간분석기능을 연계하여 유역 오염유출모형인 HSPF의 운영정보 생성을 지원하는 정보시스템을 개발하는데 있다. 주 연구내용은 시스템 분석 및 설계, 기초 데이터 수집과 DB 구축, 지형 매개변수 산정을 위한 GIS-HSPF의 통합 인터페이스 구축이다. 개발된 KBASIN-HSPF는 EPA에 의해 개발된 BASIN의 유역분할, 하천망생성, 지형특성계수 산정 기능과 함께 우리나라의 지형 오염원 기상정보의 저장구조를 고려한 데이터 모델링, Thiessen망에 준한 강우자료 보정 그리고 HSPF 모형운영정보 생성 및 전환기능을 포함하고 있다. KBASIN-HSPF는 기존의 오염유출모델링을 위해 자료준비부터 정보연계, 모형운영까지 분산된 환경에서 수행되었던 것을 통합환경하에서 진행함으로써 정보의 질적보장과 정보전환의 표준화방안을 제시하는 정보분석시스템이다.

  • PDF

공사 중 환기덕트 누풍 최소화를 위한 접속부 개발 및 성능평가 연구 (A study on the development and performance evaluation of duct coupling for the minimized leakage of temporary ventilation duct)

  • 조형제;전규명;민대기;김종원;백종훈
    • 한국터널지하공간학회 논문집
    • /
    • 제20권1호
    • /
    • pp.145-160
    • /
    • 2018
  • 초장대 해저터널은 환기를 위한 연직갱 또는 경사갱 설치에 공간적으로 많은 제한을 받게 되므로 일부 인공섬을 건설하여 환기를 수행할 필요가 있다. 그러나 인공섬 설치는 건설의 어려움뿐만 아니라 건설비용이 증가하게 되므로 인공섬 설치를 최소화할 필요가 있다. 이에 따라 환기거리가 증가하여 누풍에 의한 공급 풍량이 커지게 되면, 공사 중 환기를 위한 덕트 설치가 불가능해지거나 팬 정압 및 동력이 상당히 증가하게 된다. 따라서 초장대 해저터널을 건설하기 위해서는 이러한 현실적인 문제를 극복하고 시공 중 터널 내 환경을 쾌적한 상태로 유지할 수 있는 기술력이 필요하다. 선행 연구에서 우리는 누풍이 이 문제들을 해결하는 핵심 인자이며 실험 결과 새로운 접속방식의 누풍율은 대략 $1.46mm^2/m^2$임을 밝혔다(Jo et al., 2017). 본 연구에서는 새로운 접속방식이 적용된 시제품의 누풍율 측정 결과를 제시하고 기존 접속방식의 누풍 성능 개선을 위해 덕트 내부에 연질막 적용시의 누풍 성능 개선을 실험적으로 분석하였다.

Frontiers in Magneto-optics of Magnetophotonic Crystals

  • Inoue, M.;Fedyanin, A.A.;Baryshev, A.V.;Khanikaev, A.B.;Uchida, H.;Granovsky, A.B.
    • Journal of Magnetics
    • /
    • 제11권4호
    • /
    • pp.195-207
    • /
    • 2006
  • The recently published and new results on design and fabrication of magnetophotonic crystals of different dimensionality are surveyed. Coupling of polarized light to 3D photonic crystals based on synthetic opals was studied in the case of low dielectric contrast. Transmissivity of opals was demonstrated to strongly depend on the propagation direction of light and its polarization. It was shown that in a vicinity of the frequency of a single Bragg resonance in a 3D photonic crystal the incident linearly polarized light excites inside the crystal the TE- and TM-eigen modes which passing through the crystal is influenced by Brags diffraction of electromagnetic field from different (hkl) sets of crystallographic planes. We also measured the faraday effect of opals immersed in a magneto-optically active liquid. It was shown that the behavior of the faraday rotation spectrum of the system of the opal sample and magneto-optically active liquid directly interrelates with transmittance anisotropy of the opal sample. The photonic band structure, transmittance and Faraday rotation of the light in three-dimensional magnetophotonic crystals of simple cubic and face centered cubic lattices formed from magneto-optically active spheres where studied by the layer Korringa-Kohn-Rostoker method. We found that a photonic band structure is most significantly altered by the magneto-optical activity of spheres for the high-symmetry directions where the degeneracies between TE and TM polarized modes for the corresponding non-magnetic photonic crystals exist. The significant enhancement of the Faraday rotation appears for these directions in the proximity of the band edges, because of the slowing down of the light. New approaches for one-dimensional magnetophotonic crystals fabrication optimized for the magneto-optical Faraday effect enhancement are proposed and realized. One-dimensional magnetophotonic crystals utilizing the second and the third photonic band gaps optimized for the Faraday effect enhancement have been successfully fabricated. Additionally, magnetophotonic crystals consist of a stack of ferrimagnetic Bi-substituted yttrium-iron garnet layers alternated with dielectric silicon oxide layers of the same optical thickness. High refractive index difference provides the strong spatial localization of the electromagnetic field with the wavelength corresponding to the long-wavelength edge of the photonic band gap.

Verification of Microstructure Qualities of ACR-Approved Mammography Phantoms by Refraction-Enhanced Synchrotron Radiation Imaging

  • Imamura, Keiko;Ehara, Norishige;Inada, Yoichi;Miyamoto, Keiko;Kanemaki, Yoshihide;Umetani, Keiji;Uesugi, Kentaro;Ochiai, Yoshinori;Fukuda, Mamoru;Nakajima, Yasuo
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2002년도 Proceedings
    • /
    • pp.415-417
    • /
    • 2002
  • Images of microcalcification specks showed large variation in conventional radiographs of phantoms which are approved for mammography image quality standard by the American College of Radiology (ACR). This kind of variation is not appropriate for image quality standards because the number of specks are visually counted in images and that number is important in image quality evaluation. Our study using synchrotron radiation (SR) imaging revealed the overlapping of micro-sized air bubble(s) to some specks, and also the structural deformation or crackings. Eight phantoms approved by ACR from two different makers and an air-bubble phantom were examined. SR imaging was performed at a synchrotron radiation facility, SPring-8, in Japan. The image-detector was a fluorescent-screen optical-lens coupling system using a CCD camera with a spatial resolution of 6 $\square$m. Objects when imaged with longer sample-to-detector distance show edge enhancement due to a difference in refraction indices, that is refraction enhancement. Refraction-enhanced SR images revealed that some of specks carried foreign objects, which were proven to be air. In phantoms provided by one maker, attaching/overlapping airs were observed for 62 out of 150 specks (41%) , with a higher incidence for the smallest specks. A speck becomes hardly visible in a conventional radiograph when air(s) overlaps the majority part of a speck, though depending on the size of the air-inclusion and on its configuration. Those airs might have been adsorbed on a speck surface before being embedded and then introduced into the matrix together with specks. Our study using SR imaging has clearly shown the nature of defects in some mammography phantoms which seriously degrade the quality as an image standard.

  • PDF

정위치 기반 고속 실외 측위 DB 구축을 위한 MMS활용 방안에 관한 연구 (A Study on a utilizing Mobile Mapping System for establishing the High Speed Outdoor Positioning DB based on Field Check Data)

  • 이하동;이윤;최윤수;정인훈
    • 대한공간정보학회지
    • /
    • 제25권2호
    • /
    • pp.31-37
    • /
    • 2017
  • 최근 정부기관 및 지자체에서는 화재, 납치 등 긴급구조에 스마트폰의 위치정보를 활용하기 위한 방안을 모색하고 있는 실정이다. 이에 본 연구에서는 긴급상황에서 활용 가능한 정밀측위정보를 구축하기 위해 스마트폰 위치정보와 mobile mapping system을 활용하여 정위치 기반의 Wi-Fi AP 데이터를 신속하게 수집 구축할 수 있는 방안을 제시하였다. 수집된 성과를 통해 GPS/INS/DMI에 대한 보정작업을 실시하여 정확한 수집차량의 위치를 취득하였다. 또한 Wi-Fi AP 수집기와 GPS 시각을 기준으로 커플링하여 Wi-Fi 정보와 수집위치를 통합한 원시데이터를 구축하고, 측위성능을 저하시키는 Wi-Fi AP 신호의 잡음 제거를 통해 Wi-Fi radiomap을 구축하였다. 각 자치구별로 10개의 테스트 지점을 선정하여 측위성능평가를 실시한 결과, 전체 자치구 평균은 25.46m, 표준편차는 27.76m의 결과 값을 얻을 수 있었다. 이러한 결과는 현재 사용하고 있는 이동통신사 기지국 측위(200m~2km)와 실내에서 불가능한 GPS 측위기술을 보완하거나 대체할 수 있는 기술로서 활용 가능할 것으로 판단된다.