• The Korean Journal of Ecology
• /
• 제8권1호
• /
• pp.1-5
• /
• 1985

The plastochron index (PI) provides possibility on studies of the effects of various environmental factors on morphological and physiological development of plants. The PI of Erickson and Michemlini(1957) could be used merely when leaf n is longer an leaf n+1 is smaller than the references length at any time. If both the lengths of leaf n and n+1 are smaller or longer than the reference length, it could not estimated. In this study, the PI of Erickson and Michelini was complemented and the linear patterns according to leaf arrangement was represented, PI is n-(lnLR-lnLn)/(lnLn-lnLn+1). And when both the lengths of leaf n and n+1 are longer than the length of reference, PI is n+1+(ln Ln+1-lnLR)/(lnLn-lnLn+1). The linear model of PI is changed by the various environmental factors and the linear patterns are different according to leaf arrangement. According to leaf arrangement, the equation of the general regression lines is Yin-(i-j)=a-(n-1)(q1+...+qi-1)-(q1+...+qj-1)+rt+$\varepsilon$. Where Y:the logarithmic of the leaf length in question, i:leaf number hang on the one node, n:the number counting from base, q:spacing on the Y-axis, j:0, 1, 2, ..., r:slope, t:time, $\varepsilon$:error.

• Wind and Structures
• /
• 제29권1호
• /
• pp.43-53
• /
• 2019

Vortex-induced vibration of three circular cylinders (each of diameter D) in an equilateral triangular arrangement is investigated using the immersed boundary method. The cylinders, with one placed upstream and the other two side-by-side downstream, are free to vibrate in the cross-flow direction. The cylinder center-to-center spacing L is adopted as L/D = 2.0. Other parameters include the Reynolds number Re = 100, mass ratio $m^*=2.0$, reduced velocity $U_r=2{\sim}15$ and damping ratio ${\zeta}=0$. Cylinder vibration responses are dependent on $U_r$ and classified into five regimes, i.e. Regime I ($U_r{\leq}3.2$), Regime II ($3.2<U_r{\leq}5.0$), Regime III ($5.0<U_r{\leq}6.4$), Regime IV ($6.4<U_r{\leq}9.2$) and Regime V ($U_r>9.2$). Different facets of vibration amplitude, hydrodynamic forces, wake patterns and displacement spectra are extracted and presented in detail for each regime.

• 전기학회논문지
• /
• 제64권12호
• /
• pp.1673-1678
• /
• 2015

This paper describes magnetic field on power cable in underground transmission systems. Based on specification which is being used in domestic power utility, magnetic field was analyzed in accordance with line arrangement, line burial depth and phase spacing. Magnetic field magnitude and its trend were understood in each circuit type such as double circuits, triple circuits and quadruple circuits of underground transmission systems. In addition, magnetic field was analyzed according to phase arrangement changing in each circuit. Finally, the proper phase arrangement configuration type was suggested by the evaluation of analysis result. Magnetic field was calculated by using Biot-Savart's law. According to the evaluated magnetic fields based on phase layout configuration in each circuit, it figured out that each of magnetic fields was different. As a result, this paper proposes a proper phase layout configuration for generating minimum magnetic field. It is evaluated that the phase layout configuration in each circuit proposed in this paper can be used at actual underground transmission systems.

• 대한기계학회논문집B
• /
• 제36권1호
• /
• pp.55-60
• /
• 2012

본 연구는 탄성 지지된 두 원기둥이 병렬로 배열되어 있을 때의 유력 진동 특성을 실험적으로 연구한 것이다. 구체적으로 2 원기둥의 각 간격(L/D, L:2 원기둥의 최단 거리, D:원기둥 직경)에서의 유속 변화에 따른 유력 진동 특성을 조사했다. 그리고 원기둥의 유력 진동 발생 메커니즘을 규명하기 위해 강제 진동 장치로 유력 진동을 정확히 재현한 가시화 실험을 하여 원기둥 주변의 흐름 패턴을 조사했다. 그 결과, 병렬 배열된 2 원기둥 사이의 스위칭 플로우의 변화에 따라 유력 진동 특성도 4 개의 패턴으로 변하는 것을 알 수 있었다. 그리고 직렬, 대각선, 병렬 배열된 2 원기둥 중에서 가장 유력 진동이 발생하기 쉬운 배열은 병렬 배열임을 본 연구를 통해 알 수 있었다.

• 대한치과교정학회지
• /
• 제47권6호
• /
• pp.365-374
• /
• 2017

Objective: The objective of this study is to investigate the eruption pattern and root resorption of the bovine anterior dentition in relation to growth-related parameters based on dental maturity. Methods: A cross-sectional study was conducted on 110 bovine anterior mandibles by using standard radiography, cone-beam computed tomography (CBCT), and actual measurements. We determined the relationships between the stages of dental maturity by using a modification of Demirjian's method and various growth-related parameters, such as the activity of the root-resorbing tissue and mobility of the deciduous teeth. The correlation of growth-related parameters with interdental spacing and distal unusual root resorption (DRR) of the deciduous fourth incisor was assessed. The cause of mesial unusual root resorption (MRR) of the deciduous fourth incisor was determined on the basis of the arrangement of the permanent third incisor. Results: An independent t-test and chi-square test indicated significant differences in growth-related parameters associated with dental arch length discrepancy and factors related to the shedding of deciduous teeth between the low and high dental maturity groups. The samples with interdental spacing and DRR showed a larger sum of mesiodistal permanent crown widths and higher dental maturity than did the respective controls. Samples with MRR tended to show a lingually rotated distal tip of the adjacent tooth crown. Conclusions: Dental maturity has relevance to the interdental spaces and unusual root resorption of mixed dentition. The position of the adjacent tooth crown on CBCT may be correlated with the occurrence of unusual root resorption of the incisor.

• Interaction and multiscale mechanics
• /
• 제2권4호
• /
• pp.397-411
• /
• 2009

The effect of soil-structure interaction on a simple single storeyed and two bay space frame resting on a pile group embedded in the cohesive soil (clay) with flexible cap is examined in this paper. For this purpose, a more rational approach is resorted to using the three dimensional finite element analysis with realistic assumptions. The members of the superstructure and substructure are descretized using 20 node isoparametric continuum elements while the interface between the soil and pile is modeled using 16 node isoparametric interface elements. Owing to viability in terms of computational resources and memory requirement, the approach of uncoupled analysis is generally preferred to coupled analysis of the system. However, an interactive analysis of the system is presented in this paper where the building frame and pile foundation are considered as a single compatible unit. This study is focused on the interaction between the pile cap and underlying soil. In the parametric study conducted using the coupled analysis, the effect of pile spacing in a pile group and configuration of the pile group is evaluated on the response of superstructure. The responses of the superstructure considered include the displacement at top of the frame and moments in the superstructure columns. The effect of soil-structure interaction is found to be quite significant for the type of foundation used in the study. The percentage variation in the values of displacement obtained using the coupled and uncoupled analysis is found in the range of 4-17 and that for the moment in the range of 3-10. A reasonable agreement is observed in the results obtained using either approach.

• 암석학회지
• /
• 제25권4호
• /
• pp.311-324
• /
• 2016

거창지역의 쥬라기 화강암에서 발달하는 결의 특성을 분석하였다. 3개 면 및 3개 결에 대한 평가는 (1) 간격의 값 그리고 길이의 값 사이의 감소비율, (2) 미세균열의 간격의 빈도수(N), (3) 총 간격($1mm{\geq}$), (4) 지수의 상수(a), (5) 지수(${\lambda}$)의 크기, (6) 평균 간격($S_{mean}$), (7) 평균 간격과 중앙 간격($S_{median}$) 사이의 차이 값($S_{mean}-S_{median}$) 및 (8) 간격의 밀도(${\rho}$)와 같은 파라미터를 이용하여 수행하였다. 특히 상기 간격의 파라미터 그리고 간격-누적빈도 도표에서 도출한 파라미터 사이의 밀접한 상관성을 도출하였다. 3개 채석면 그리고 3개 결을 대변하는 판별요소들은 이러한 상호 대비를 통하여 획득하였다. 이 연구의 분석 결과를 요약하면 다음과 같다. 첫째, 3개 결에 대한 빈도수, 평균값, 중앙값, 상기 차이값($S_{mean}-S_{median}$) 및 밀도의 감소비율은 G(2번 결, (G1 + G2)/2) < H(3번 결, (H1 + H2)/2) $\ll$ R(1번 결, (R1 + R2)/2), H < G $\ll$ R, H < G $\ll$ R, H < G < R 및 H < G $\ll$ R의 순이다. 3개 면에 대한 상기 5개 파라미터의 값은 R'(1번 면) $\ll$ H'(3번 면) < G'(2번 면), R' $\ll$ G'< H', R' < H' < G', R' < G' < H' 및 R' $\ll$ H' < G'의 다양한 순을 각각 보여준다. 둘째, (I) 파라미터(2, 3, 4 및 5) 및 (II) 파라미터(6, 7 및 8)의 값은 (I) H < G < R 및 (II) R < G < H의 순서이다. 반면에 3개 면에 대한 상기 두 그룹(I~II)의 파라미터의 값은 역순을 보여준다. 셋째, 여섯도표 사이의 전체적인 배열 특성을 살펴보면, 이들 도표들은 관계도에서 R2 < R1 < G2 < G1 < H2 < H1의 순을 보여 준다. 즉, 상기 여섯 도표는 1번 결(R1 + R2) < 2번 결(G1 + G2) < 3번 결(H1 + H2)의 순으로 요약될 수 있다. 이러한 결과는 미세균열의 간격과 관련된 결의 상대적인 강도를 지시한다. 특히 각 도표의 두 파라미터, 상기 차이값($S_{mean}-S_{median}$) 그리고 평균 간격은 도표 사이의 배열 순위의 예측에 대한 사전 정보를 제공할 수 있다. 마지막으로, 3개 면 그리고 3개 결의 종합도를 작성하였다. 관계도에서, 3개 결에 대한 3개 지수 직선의 순서는 R(R1 + R2) < G(G1 + G2) < H(H1 + H2)의 순을 보여준다. 반면에, 3개 면에 대한 3개 지수 직선은 H'(R2 + G2) < G'(R1 + H2) < R'(G1 + H1)의 순을 보여준다. 따라서 관계도로 부터 3개 면 및 3개 결 사이의 상호 역순의 상관성을 도출할 수 있다.

• 암석학회지
• /
• 제26권2호
• /
• pp.127-141
• /
• 2017

거창지역의 쥬라기 화강암에 대하여 결의 특성에 대한 분석을 실시하였다. 박편의 확대사진(${\times}6.7$) 및 간격-누적빈도 도표에서 도출한 미세균열의 간격과 관련된 파라미터를 통하여 여섯 방향의 결에 대한 다기준 평가를 실시하였다. 결에 대한 이들 간격의 파라미터의 대표 값에 대한 분석 결과를 요약하면 다음과 같다. 첫째로, 여섯 도표 사이의 배열순을 지시하는 주요 파라미터의 도출을 위한 분석을 수행하였다. 위의 분석을 위하여 여섯 방향의 결에 대한 5개 파라미터의 값에 대하여 증가 또는 감소하는 순으로 배열하였다. 주요 파라미터(평균 간격-중앙 간격, $S_{mean}-S_{median}$) 및 평균 간격의 값이 감소하는 순은 H1, H2, G1, G2, R1 그리고 R2 방향의 순과 상호 부합한다. 여섯 방향의 결의 이러한 순차적인 배열은 간격과 관련된 여섯 도표의 순차적인 배열에 대한 근거를 제공할 수 있다. 둘째로, 위의 주요 파라미터 그리고 다양한 파라미터 사이의 9개 상관도를 상관계수($R^2$)가 감소하는 순으로 배열하였다. 이들 관련도는 공통적으로 멱법칙함수의 높은 상관성을 보여 준다. 평균 간격, 밀도 및 선 oa의 길이의 값은 주요 파라미터의 값과 정비례하지만, 반면에 상수(a), 지수(${\lambda}$), 간격의 빈도수(N), 선 oa'의 길이, 지수 직선의 기울기(${\theta}$) 및 총 길이($1mm{\geq}$)는 반비례한다. 셋째로, 3개 면에 대한 파라미터의 값 그리고 3개 결에 대한 파라미터의 값 사이의 상관성 분석의 결과는 다음과 같다. 3개 면 및 3개 결에 대한 빈도수, 총 간격, 상수, 지수, 기울기, 선 oa' 길이의 값은 R' < G' < H' 및 H < G < R의 순을 각각 보여 준다. 반면에, 3개 면 및 3개 결에 대한 평균 간격, (평균 간격 - 중앙 간격), 밀도 및 선 oa의 길이의 값은 H' < G' < R' 및 R < G < H의 순을 각각 보여 준다. 3개 결 및 3개 면 사이의 파라미터의 값의 상호 역순의 상관성이 도출될 수 있다. 이러한 유형의 상관성 분석은 3개 채석면의 판별에 유용하다.

• Coupled systems mechanics
• /
• 제3권4호
• /
• pp.367-384
• /
• 2014

The study deals with the physical modeling of a typical single storeyed building frame resting on pile foundation and embedded in cohesive soil mass using the finite element based software SAP-IV. Two groups of piles comprising two and three piles, with series and parallel arrangement thereof, are considered. The slab provided at top and bottom of the frame along with the pile cap is idealized as four noded and two dimensional thin shell elements. The beams and columns of the frame, and piles are modeled using two noded one dimensional beam-column element. The soil is modeled using closely spaced discrete linear springs. A parametric study is carried out to investigate the effect of various parameters of the pile foundation, such as spacing in a group and number of piles in a group, on the response of superstructure. The response considered includes the displacement at the top of the frame and bending moment in columns. The soil-structure interaction effect is found to increase the displacement in the range of 38 -133% and to increase the absolute maximum positive and negative moments in the column in the range of 2-12% and 2-11%. The effect of the soil- structure interaction is observed to be significant for the type of foundation and soil considered in this study. The results obtained are compared further with those of Chore et al. (2010), wherein different idealizations were used for modeling the superstructure frame and sub-structure elements (foundation). While fair agreement is observed in the results in either study, the trend of the results obtained in both studies is also same.

• 한국세라믹학회지
• /
• 제17권2호
• /
• pp.69-74
• /
• 1980

This study deals with the wire content, wire diameter, aspect ratio , it's arrangement of steel, wire fiber and the sorts of castable which affected the character of steel wire fiber reinformced refractory castable. Two kinds of alumina based refractory castables, one is for 1650℃ and the other is for 1800℃, and stainless steel which is SUS 304 type 0.25, 0.34 , 0.37 and 0.50m/min diameter were used respectively. Aspect ratio was adjusted to 50, 75, 100 and steel fiber content was also adjusted to 1-4wt% each. The results of the experiment were as follows : 1. At firing temperature around 1,000℃, MOR is increased with increasing wire content and aspect ratio with decreasing firing temperature, which depends on the Romualdi's Fiber Spacing Theory. But for calculation of the fiber spacing, Swamy equation is more a aplicable to the extensive fiber mixing conditions. However, the condition differs from the above at firing temperature around 1,350℃ ,because of the degradation of wire and the progress of sintering of castable. 2. Linear change is getting larger corresponding to the increase of wire content, and the spaling resistivity is increasing corresponding to the increase of wire content and to aspect ratio, and with decreasing wire diameter. 3. Firing shrinkage under load is getting greater as higher wire content, and the shrinkage of the test pieces which fiber is vertically oriented is getting greater than the test pieces which fiber is randomly oriented.