• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.52.2-52.2
• /
• 2013

We compile a near-infrared photometric and polarimetric catalog for the $5{\times}9$ fields (${\sim}39^{\prime}{\times}69^{\prime}$) in the eastern side of the Large Magellanic Cloud (LMC). The photometric and the polarimetric data were obtained in J, H, and Ks bands using JHKs-simultaneous imaging polarimeter SIRPOL of the InfraRed Survey Facility (IRSF) in 2008 December and 2011 December. We estimate quality of the data using the method and the result from the IRSF Magellanic Clouds point source catalog which was published on 2007 June. In this poster, we present configuration of the catalog and the results of the verification.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.579-587
• /
• 2017

Spaceborne cryocoolers produce undesirable micro-vibration disturbances during their on-orbit operation, which are a primary source of image-quality degradation for high-resolution observation satellites. Therefore, to comply with the strict mission requirement of high-quality image acquisition, micro-vibration disturbances induced by cooler operation have always been subjected to an isolation objective. However, in this study, we focused on the applicability of energy harvesting technology to generate electrical energy from micro-vibration energy of the cooler and investigated the feasibility of utilizing harvested energy as a power source to operate low-power-consumption devices such as micro-electromechanical system (MEMS) devices. A tuned mass damper (TMD)-type electromagnetic energy harvester combined with a conventional passive vibration isolator was proposed to achieve this objective. The system performs the dual functions of electrical energy generation and micro-vibration isolation. The effectiveness of the strategy was evaluated through numerical simulations.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.971-981
• /
• 2006

As shear-warp volume rendering is the fastest rendering method among the software based approaches, image quality is not good as that of other high-quality rendering methods. In this paper, we propose two methods to improve the image quality of shear-warp volume rendering without sacrificing computational efficiency. First, supersampling is performed in intermediate image space. We propose an efficient method to transform between volume and image coordinates at the arbitrary ratio. Second, we utilize pre-integrated rendering technique for shear-warp rendering. We propose new data structure called overlapped min-max map. Using this structure, empty space leaping can be performed so that we can maintain the rendering speed even though pre-integrated rendering is applied. Consequently, shear-warp rendering can generate high-qualify images comparable to those generated by the ray-casting without degrading speed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.22-30
• /
• 2024

Image compression-decompression methods have become increasingly crucial in modern times, facilitating the transfer of high-quality images while minimizing file size and internet traffic. Historically, early image compression relied on rudimentary codecs, aiming to compress and decompress data with minimal loss of image quality. Recently, a novel compression framework leveraging colorization techniques has emerged. These methods, originally developed for infusing grayscale images with color, have found application in image compression, leading to colorization-based coding. Within this framework, the encoder plays a crucial role in automatically extracting representative pixels-referred to as color seeds-and transmitting them to the decoder. The decoder, utilizing colorization methods, reconstructs color information for the remaining pixels based on the transmitted data. In this paper, we propose a novel approach to image compression, wherein we decompose the compression task into grayscale image compression and colorization tasks. Unlike conventional colorization-based coding, our method focuses on the colorization process rather than the extraction of color seeds. Moreover, we employ the Denoising Diffusion Null-Space Model (DDNM) for colorization, ensuring high-quality color restoration and contributing to superior compression rates. Experimental results demonstrate that our method achieves higher-quality decompressed images compared to standard JPEG and JPEG2000 compression schemes, particularly in high compression rate scenarios.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.57-60
• /
• 1999

An optimal control technique designed for simultaneous tracking and quality control for batch processes. The proposed technique is designed by transforming quadratic-criterion based iterative learning control(Q-ILC) into linear quadratic control problem. For real-time quality inferential control, the quality is modeled by linear combination of control input around target qualify and then the relationship between quality and control input can be transformed into time-varying linear state space model. With this state space model, the real-time quality inferential control can be incorporated to LQ control Problem. As a consequence, both the quality variable as well as other controlled variables can progressively reduce their control error as the batch number increases while rejecting real-time disturbances, and finally reach the best achievable states dictated by a quadratic criterion even in case that there is significant model error Also the computational burden is much reduced since the most computation is calculated in off-line. The Proposed control technique is applied to a semi-batch reactor model where series-parallelreactions take place.

• Korean Institute of Interior Design Journal
• /
• no.6
• /
• pp.15-20
• /
• 1995

In this paper, a strategy for utilizing the Korean tradi-tional spaces and interior design elements in inner space in order to express Korean-style interior design has been studied. Characteristics of Korean tradition was gathered from literatures in two categories; space and el-ements. Space again has been studied in detail in the area of split, continuity, hierarchy, elasticity, dynamics. And study of elements includes floor, wall, ceiling, dan-chung, lattice, laytiles on a roof, rafter, extended eaves, the line of eaves. 30 Korean restaurants were selected, analysed and compared with literature review. Based on the compari-son, a strategy for proper expression and utilization of Korean tradition is suggested. In the process of compari-son, current status of implementation and problems were found. Traditional elements are used in about 50% of Korean restaurants located in hotels, and 25% of those located in department stores. With the survey and other professional's opinions, an implementation plan is suggest-ed as follows; 1. Succession design method of tradition should use main-ly amelioration method and use copy and partly abstraction method. 2. Expression of tradition has to include all of space, ele-ments, and decoration. In space structure, Korean tra-dition space structure must be applied. 3. In order to design with feeling of Korean tradition, various different Korean elements have to be used. 4. In order to express high quality design, high-quality elements has to be used.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.3
• /
• pp.189-200
• /
• 2015

In this study, we present the results of orbit determination (OD) using satellite laser ranging (SLR) data for the Science and Technology Satellite (STSAT)-2C by a short-arc analysis. For SLR data processing, the NASA/GSFC GEODYN II software with one year (2013/04 - 2014/04) of normal point observations is used. As there is only an extremely small quantity of SLR observations of STSAT-2C and they are sparsely distribution, the selection of the arc length and the estimation intervals for the atmospheric drag coefficients and the empirical acceleration parameters was made on an arc-to-arc basis. For orbit quality assessment, the post-fit residuals of each short-arc and orbit overlaps of arcs are investigated. The OD results show that the weighted root mean square post-fit residuals of short-arcs are less than 1 cm, and the average 1-day orbit overlaps are superior to 50/600/900 m for the radial/cross-track/along-track components. These results demonstrate that OD for STSAT-2C was successfully achieved with cm-level range precision. However its orbit quality did not reach the same level due to the availability of few and sparse measurement conditions. From a mission analysis viewpoint, obtaining the results of OD for STSAT-2C is significant for generating enhanced orbit predictions for more frequent tracking.

• Korean Institute of Interior Design Journal
• /
• no.22
• /
• pp.61-68
• /
• 2000

This paper illustrates what the reality of architectural concepts, materials, notions and phenomena are as central questions of contemporay space design. These issues form the goal of modern space design which should attain to the reality of an era when non-real values prevail. Despite the trends of an everchanging and ephemeral dominating quality in architecture for the last ten years, architects still aim to contruct everlasting space on earth. The trends of dematerialization in today's space design can be substantiated in spatial-temporal dimensions as follows. First of all, ephemeral architecture with concepts of hypothetical temporality, everchanging architecture in fluidity, and the transparent architecture with the floating and overlapping image can be analyzed in the dimension of 'time'. In terms of 'space', void quality for the expression of emptiness, neutral space by the simplified and summarized forms, expanded space through ambiguous boundaries and spatial repetition can becharacterized and also be intended strategies for lightness, state of flux, ambiguity, paradox etc., lead modern space design along that path. As this point, we need to pay attention to the so-called 'hypersurface' concept proposed by Stephen Perella. Hypersurface is a sort of cladding sheathing existence independent from the primary structure. With it, the integration between form and image can be achieved. Sometimes hypersurface can be a strategical screen for image projection, a cognitive receptor for surroundings as well as a catalyst for information and communication systems. When the situation dematerializes more and more as the years go on, the concept of hypersurface can be an inclusive method between the phenomenological form in architecture and its self recipient image. Permissive atmospheres created between them in contemporary space design and new paradigms emerged with digital technology will further reinforce the human space's dynamism.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.281-288
• /
• 2001

It shows 21st century as a networking society that is moving up the concept of global town and being industrialized with regional and personal connections. Individual's original idea and variety of 21th century may be respected by such environmental change, and age (Literary, human axis, technology axis, nature axis, kaining farming axis are central keyword) of culture that cultural capacity of individual becomes important fetters that create added value is forecasted to become. The moaning for space that is unemployment enemy by change of conceptional environment about cultural life and agreeable quality of life by development of Information-Communication technology may be required newly. As it does interaction along with development of science technique and Information-Communication technology, the future environment of various that complex! Is predicted to form network environment (existence space, cyberspace) newly. Human central interest is risen in technology balance hereupon, and these characteristic escaped in physical system that do with functional special quality and require human central and sensitive interaction. First, if examine about phenomenon by Digitize and chance aspect that is risen in 21th century, Digitize is time that action occurs fusion Tuesday that is various and Blur phenomenon of city·space, and the period to collapse the border between several individual. Second, importance more than man-centered and sensitive aspect of functional physical system is risen by digital age with development of technology medium, and as the five digital senses showed up, it suggests a sensual of the times and therefore the interest and direction get set up for the sensual sides of consumers. Third, special quality is, medium enemy by that digital space connotes meaning disk floret, variability, transparency, space red of extensity etc.. to burn and is digitalised, can be risen by symbolic, original individualities and emotional communication's the importance is required sensitivity enemy who is sympathy horn by fusion anger of individual. Technology of new media may open direction of new communication through interface that did not enjoy so far is going to supply new means that can express own to human

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.5
• /
• pp.304-313
• /
• 2008

This paper investigates the indoor-air-quality (IAQ) characteristics of the interior space equipped with system air-conditioner. The behaviors of individual variables such as temperature, humidity and concentration of carbon dioxide ($CO_2$) that influence on IAQ of the interior space were characterized under various cooling conditions by numerical and experimental studies. The numerical analysis predicting the temperature behavior of the interior space was conducted, and its results showed a good agreement with the experimental ones. The $CO_2$ concentration and humidity were measured and their time dependent behaviors were monitored and analyzed. From the results, it was found that there existed the differences of the time-dependent behaviors of IAQ variables according to the locations. In addition, it is demonstrated that the large discharge angle of $45^{\circ}$ made the temperature profile more irregular and the high discharge flow of 5.34 m/s produced similar temperature profiles at three different sensing locations. Finally, the humidity of interior space was less sensitive to the changes of the air cooling conditions than the case of temperature and the $CO_2$ concentration increase mainly depended on the number of individuals inside the space.