• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.369-376
• /
• 2007

This experiment was carried out to investigate optimum conditions of coir-based substrates for the red pepper plug seedlings. Eleven different coir based substrates prepared by mixing of coir, vermiculite, rice hull, perlite, zeolite, mixed at different ratios were tested. The physical and chemical properties of the substrates were analyzed by the CEN (European committee for standardization) method. Fresh and dry weights of shoot and root, leaf area, root length, and T/R ratio (dry shoot weight/dry root weight) were determined at 55 days after sowing. The results showed that the growing media CRZ 8(coir:rice hull: vermiculite=8:1.9:0.1) and CVSZ 6(coir:silver vermiculite: zeolite=6:3.9:0.1) can successfully be used for pepper plug seedlings judging from dry weight and T/R ratio of the plug seedlings. The optimal range of total pore space, water volume, air volume, easily available water content and water buffering capacity of the coir-based growing substrates for pepper plug seedlings were in the range of 92~94%, 52~60%, 32~43%, 18~21%, and 0.9~8%, respectively.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.927-938
• /
• 2021

A similar magnitude of non-gravitational perturbations are act on the formation flying low earth orbit satellites with a certain time difference. Using this temporal correlation, the non-gravity acceleration of the low earth orbiting satellites can be transferred for the othersatellites. There is a period in which the accelerometer data of one satellite is unavailable for GRACE and GRACE-FO satellites. In this case, the accelerometer data transplant method described above is officially used to recover the accelerometer data at the Jet Propulsion Laboratory (JPL). In this paper, we proposed a model for predicting accelerometer data of formation flying low earth orbit satellites using a neural network (NN) model to improve the estimation accuracy of the transplant method. Although the transplant method cannot reflect the satellite's position and space environmental factors, the NN model can use them as model inputs to increase the prediction accuracy. A prediction test of an accelerometer data using NN model was performed for one month, and the prediction accuracy was compared with the transplant method. The NN model outperformsthe transplant method with 55.0% and 40.1% error reduction in the along-track and radial directions, respectively.

• Journal of Marine Life Science
• /
• v.5 no.2
• /
• pp.64-71
• /
• 2020

Gloiopeltis tenax is one of the most economically useful species in China and Japan that has been applied to glue and food since ancient times. The material used in the experiment was a large quantity of basal crusts obtained from the culture of tetraspores that were released from the mature tetrasporophytes collected at Gyeokpori, Byeonsan-myeon, Buan-gun, Jeollabuk-do in Korea. The basal crusts were cut into quadrisect under a dissecting microscope so as to monitor the process of regeneration and growth. The cut crusts were cultured under varying conditions, where the photoperiod was 16:8 h L:D; the temperature range was 10, 15, 20, and 25℃; the irradiance range was 30 and 85 µmol photons m^-2s^-1. The quadrisect basal crusts grew to an oval shape, then formed a vertical axis of cylindrical shape. The maximum growth of basal crusts was 9.61±3.59 mm² under the condition of 15℃ temperature and 85 µmol photons m^-2s^-1 irradiance, after 12-weeks culture. The mean relative growth rate after 12-weeks culture showed the maximum rate of 5.15±0.80 %day^-1 at 15℃ and the minimum growth rate was 3.15±0.94 %day^-1 at 10℃, with a statistically significant difference (p < 0.05). In conclusion, it has shown the possibility that growth of basal crusts of G. tenax is one of the good farming method of potential alga.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.421-428
• /
• 2019

This paper describes a methode to extract yellow pigment from curcuma and turmeric containing natural color curcumin whose target color indexes of L, a, and b were 87.0 7.43, and 88.2, respectively. The pH range and extraction temperature used for the reaction surface analysis method were from pH 3 to pH 7 and between 40 and $70^{\circ}C$, respectively for both natural products. A central synthesis planning model combined with the method was used to obtain optimal extraction conditions to produce the color close to target. Results and regression equations show that the color space and difference of curcuma and turmeric have the greatest influence on the value. In the case of curcuma, the optimum conditions to satisfy all of the response theoretical values of color coordinates of L (74.67), a (5.69), and b (70.08) were at the pH and temperature of 3.43 and $54.8^{\circ}C$, respectively. The experimentally obtained L, a, and b, values under optimal conditions were 72.92, 5.32, and 72.17, respectively. For the case of turmeric, theoretical numerical color coordinates of L, a, and b, under the pH of 5.22 and temperature of $50.4^{\circ}C$ were 82.02, 7.43, and 72.86 respectively. Whereas, the experiment results were L (81.85), a (5.39), and b (71.58). Both cases showed an error range within 1%. Therefore, it is possible to obtain a low error rate when applying the central synthesis planning model to the reaction surface analysis method as an optimization process of the dye extraction of natural raw materials.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.692-705
• /
• 2018

Ground vibration is one of the remarkable issues in tunnel blasting. In recent studies, to improve the fragmentation with reduction of ground vibration in tunnel blasting, a vibration-controlled blasting method with artificial cutting slot near the center-cut holes has been suggested. This study examines the effect of the different arrangement of artificial cut-slot on the vibration reduction and fragmentation by performing the full-scaled concrete block blast experiments and the numerical simulations with 3D-DFPA. The results show that the existence of artificial slot contributes to the improvement of vibration reduction, blast fragmentation and the efficiency of the cutting slot blast. It can be explained that the artificial slot play a free surface role and should decrease the burden between the cut holes. Crater volumes of the blasted concrete blocks were measured by 3-dimensional digital image analysis and compared with the ideal standard crater volume which can be calculated by theoretical standard blast design method. As a result, the ratio of burden and hole diameter which should achieve the standard crater in the cut-hole blasting were suggested.

• Toxicological Research
• /
• v.35 no.3
• /
• pp.225-232
• /
• 2019

Thymus vulgaris L. is widely used as an ingredient in cooking and in herbal medicine. However, there is little information about its toxicity. The present study was performed to evaluate the acute and repeated 28-day oral dose toxicity of thyme essential oil in rats. For the acute toxicity test, two groups of three rats were used. The rats received a single dose of essential oil: 300 or 2,000 mg/kg of body weight (bw). The rats were observed individually during the first four hours, and then daily until day 14. For the toxicity test with repeated doses, four groups of 10 rats were used. Doses of 100, 250, and 500 mg/kg/day were tested for 28 days. At the end of the experiment, blood was collected and the animals were sacrificed. Histopathological examination showed that in the lungs of rats given the 2,000 mg/kg bw dose, polymorph nuclear infiltrates, hemosiderin macrophages, and interstitial space thickening were present. In the repeated dose study, all rats survived the 28-day treatment period and apparently showed no signs of toxicity. The hematological and biochemical parameters were not altered. The histopathological study of the organs showed severe changes in the lung, with the dose of 500 mg/kg/day; in the other organs, no alterations were observed or the changes were slight. The body weight was only altered in male rats given the 500 mg/kg dose. The relative weight of the organs did not show any significant changes. Our studies revealed that the essential oil of Thymus vulgaris has moderate oral toxicity according to the results of the acute test, whereas the results of the 28-day oral toxicity test suggest that the no-observed-adverse effect level (NOAEL) is greater than 250 mg/kg/day.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.4
• /
• pp.243-251
• /
• 2019

The road sign location information installed on national roads is continuously updated using MMS (Mobile Mapping System) technology. It is possible to map accurate road facilities by MMS, but the equipment is very expensive and requires specialized technology. Also, the accuracy of the position of the object greatly depends on the GPS (Global Positioning System) accuracy. In the case of road facility mapping, the advantage of drone is more remarkable than that of field survey or conventional aerial photogrammetry. In particular, it is more efficient than field surveying and it is possible to acquire high resolution images with low budget compared to conventional aerial photogrammetry. In this study, the accuracy of the location information measured by the existing MMS is compared with the GPS survey result and the accuracy analysis is performed by the drone aerial photogrammetry. In order to confirm the space accuracy that can be obtained when conducting drone aerial photogrammetry, the accuracy of the change in the number of ground control points and the degree of overlap was evaluated. As a result of the experiment, it was possible to obtain sufficient accuracy with two ground control points distributed at both ends of the road and 60% overlap.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.4
• /
• pp.289-297
• /
• 2019

Epoxy resin adhesives are currently used as adhesives in buildings. Epoxy resin adhesives, which are organic materials, generate harmful substances when producing adhesives, and toxic substances are high in the residential space after installation. In addition, a large amount of carbon monoxide generated from organic materials in the case of a building fire leads to personal injury. This study evaluates the feasibility of inorganic adhesives using pure inorganic materials such as magnesia, phosphate, and borax as inorganic adhesives to replace existing organic adhesives. As a result of the experiment on the selection of adequate phosphate and the characteristics of the addition rate of borax used as a retarder, the potassium phosphate monobasic was obtained as a suitable phosphate and the characteristics according to the borax addition rate were compared with the quality standard of KS F 4923 The hardening shrinkage and heat change rate satisfied the quality standards. The tensile strength was satisfactory when the borax addition rate was 4% or more, but the adhesive strength did not meet the quality standards. Further studies are needed to improve adhesion strength.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.262-279
• /
• 2019

In the engineering barriers of high-level radioactive waste disposal, gases could be generated through a number of processes. If the gas production rate exceeds the gas diffusion rate, the pressure of the gas increases and gases could migrate through the bentonite buffer. Because people and the environment can be exposed to radioactivity, it is very important to clarify gas migration in terms of long-term integrity of the engineered barrier system. In particular, it is necessary to identify the hydro-mechanical mechanism for the dilation flow, which is a very important gas flow phenomenon only in medium containing large amounts of clay materials such as bentonite buffer, and to develop and validate new numerical approach for the quantitative evaluation of the gas migration phenomenon. Therefore, in this study, we developed a two-phase flow model considering the mechanical damage model in order to simulate the gas migration in the engineered barrier system, and validated with 1D gas flow modelling through saturated bentonite under constant volume boundary conditions. As a result of numerical analysis, the rapid increase in pore water pressure, stress, and gas outflow could be simulated when the dilation flow was occurred.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.39-44
• /
• 2019

In this study, the relationships between the material properties of the wall and the fuel mass flux in compartment fire. The fire resistant board (fire-board) and steel plate compartments are constructed with a 0.3 m width, 0.5 m height and 3.0 m length. To obtain the mass loss rate considering the location of the fire origin in compartment, experiments of a heptane pool fire are performed with a combustion area of $0.01m^2$ and $0.0225m^2$. The results show that the initial mass flux of heptane, $0.0087kg/m^2{\cdot}s$, is increased to $0.166kg/m^2{\cdot}s$ for fire board and $0.019kg/m^2{\cdot}s$ for steel plate. It means that the fire-scenario should be considered with the thermal characteristics of the material properties and geometric shapes of the compartment to predict fire propagation accurately in a compartment space.