• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.4
• /
• pp.301-317
• /
• 2002

Recently, a geophysical exploration technology is frequently utilized in the civil engineering field as well as in the resource exploration. It might be important for civil engineers to understand the fundamental theory of seismic survey and limitation of the technique when utilizing these techniques in the civil engineering field. A 3-dimensional migration technique based on the principle of ellipsoid to predict the fractured zone ahead of tunnel face utilizing the tunnel seismic survey was proposed so that the geometry of the fractured zone can be estimated, i.e. the angle between tunnel axis and discontinuity zone, and the dip. Moreover, a numerical analysis technique to simulate the TSP (Tunnel Seismic Prediction) test was proposed in this paper. Based on parametric studies, the best element size, the analysis time step, and the dynamic characteristics of pressure source were suggested to guarantee the stability and accuracy of numerical solution. Example problems on a hypothetical site showed the possibility that the 3-dimensional migration technique proposed in this paper appropriately estimate the 3D-geometry of fractures ahead of tunnel face.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.10-19
• /
• 1992

Mn - Zn Ferrite has physical properties of the high initial permeability, saturation magnetic flux density, and low loss factor as a representative magnetic material of soft ferrites, in addition the mechanical property is excellent as a single crystal. Therefore it is important electronic components and used for VTR Head. Mn - Zn Ferrite single crystals with the diameter 8mm were grown in atmosphere mixed with $O_2$ and Ar gas by the Floating Zone(FZ) method that impurities can not be incorporated to the crystals because of not-using the crucible to put in the melt, and the sharp temperature gradient results from making a focus at one point utilizing the infrared ray emitted from the halogen lamp as a heat source. During the crystal growing, the highest temperature of melting area was maintained to be $1650^{\circ}C$, growth rate and rotation rate were 10 mm/hr, 20 rpm respectively. The phases and the growth directions of crystals were determined from the analysis of X RD patterns, Laue, TEM diffraction patterns and etch pit shapes were observed by the optical microscope through the chemical etching. The corelation of optimum conditions for acquiring the better crystals was found out with the growth rate, the length and diameter of melt at the interface according to the diameter of feed rod, and the patterns of growing interface also studied.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.318-331
• /
• 1995

The c - axis oriented single crystal of $LiNbO_3$ and $LiNbO_3$ : 5mol%MgO was success-fully grown by Floating zone method using halogen lamp as a heat source. The effects of the sintering condition of the feed rod and the atmosphere gas during the crystal growth on the be havior of the feed rod/melt interface were studied for growing crystal with the high quality, and then, the optimum growth conditions were determined by studying the experimental param eters, such as gas flow rate, pulling rate, rotation speeds of the feed rod and the seed. The grown crystals were analyzed using the chemical etching to observe the tch pattern and the ICP (Inductively Coupled Plasma) to determine the composition uniformity and the impurity content of Fe. The effects of additive (5 mol % MgO) on the transmittance and refractive index was, also, analyzed. In order to compare the nonlinear optical oharacteristics of $LiNbO_3$ with those of the other optical materials, the nonlinear optical refractive index ($n_2$) was calcu l lated using the measured refractive index.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.3
• /
• pp.205-216
• /
• 2011

Mineral compositions of 69 southeastern Yellow Sea surface sediments collected at the Korea Ocean Research and Development Institute (KORDI) cruise in 2010, were determined using the quantitative X-ray diffraction analysis. Southeastern Yellow Sea surface sediments are composed of major minerals (quartz 49.1%, plagioclase 13.0% and alkali feldspar 9.3%), clay minerals, calcite, and aragonite. Illite (9.4%) is the most abundant clay mineral, chlorite (4.6%) is the second, and kaolinite (0.8%) is few. Quartz and alkali feldspar contents are high in coarse-grained sediments, whereas amphibole and clay mineral contents are high in fine-grained sediments. Quartz, plagioclase, alkali feldspar, chlorite, and kaolinite contents are higher, and illite content is lower in mud zone 1 corresponding to south margin of Central Yellow Sea Mud than in mud zone 2, a part of Southeastern Yellow Sea Mud. Difference of mineral composition between two mud zone suggests that source of fine sediment may be different in two mud zone and Southeastern Yellow Sea Mud might be largely supplied from the Keum and Youngsan rivers in southern part of the west coast in the Korean Peninsula.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.9
• /
• pp.1166-1174
• /
• 2000

This work presents a two-dimensional quasi-steady state model to study the fluid flow and heat transfer in high-power density welding process of thin AISI-304 stainless steel plates. The enthalpy method and the finite volume method were used for a numerical analysis of the mushy region phase change as well as the heat flow at the weld pool and the heat-affected zone. The results show that the mushy region distributed around the weld pool becomes wider downstream and the surface heat losses by convection and radiation can be significant factors in welding process especially when a welding speed is relatively low.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.2
• /
• pp.5-11
• /
• 1986

In recent years the acoustic emission technique has been increasingly applied for detecting flaw s and cracks in materials either under testing or in service. It is important that what is the origin of AE signals detected by AE transducers. The purpose of this paper is to detect AE source on ductile material such as pressure vessel steel, A533B. As the results of experimentation, the increase of AE events number is proportional to the increase of the volume of plain strain zone. The origin of AE signals is fracture of MnS inclusions which have small amplitude of AE waves.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.86-86
• /
• 2016

최근 포항가속기연구소 10A 빔라인에 Scanning Transmission X-ray Microscopy (STXM)가 완성되어 운영 중이다. Soft x-ray imaging 장치로서 기술적으로 Sample scanning 기법이 활용된다. 이는 Zone plate를 통해 집속된 빔이 샘플에 조사되고 검출되는 방식이다. 이러한 Scanning 기법을 활용하고 있는 10A STXM은 기본적으로 흡수분광기법 (x-ray absorption spectroscopy)을 이용하고 있다. 특히, 10A 빔라인 STXM은 최고 20 nm까지 공간분해능이 가능하다는 장점이 있다. 따라서 수십에서 수백 나노미터 크기의 시료들 또는 나노구조에 대한 물리화학적 상태 분석이 쉽게 이루어지고 있다. 주로 시료를 투과하면서 흡수되는 X-선 세기 대비를 맵핑하는 형식의 이미지 데이터와 더불어 X-선의 에너지를 조정함으로써 각 에너지에 해당하는 이미지스택을 결과로 얻게 된다. 이러한 이미지 결과로부터 시료의 나노크기에서 오는 물리화학적 상태를 분석하고 물리에서 바이오까지 다양한 분야의 실험 활용이 가능한 상태다.

• Economic and Environmental Geology
• /
• v.31 no.6
• /
• pp.519-526
• /
• 1998

A high-resolution seismic survey was conducted at the northeastern boundary of Pungam basin, one of the Cretaceous sedimentary basins in Korea. A 100 kg weight was used as an energy source and was found to be better than a sledge hammer in mapping deeper geologic structures. Several processing techniques such as f-k filtering, predictive deconvolution, and time-variant filtering are useful to enhance the signal-to-noise ratio by suppressing unwanted seismic energy. Four seismic units are recognized where many vertical faults are developed. The boundary fault between sedimentary rocks and Precambrian gneiss is identified along with a fracture zone of approximately 30 m wide. Bedding planes of the sedimentary rocks dipping westward are interpreted to be limbs of a syncline or volcanic flow. There faults and tilted bedding planes indicate that the basin had undergone significant tectonic deformation.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.1
• /
• pp.1-7
• /
• 1999

This study deals with linear flow pattern in steady-state or transient dual-porosity media with a vertical geologic structure such as fault, fracture zone, etc. A pumping well is located in the vertical structure of infinitesimal or finite width with high hydraulic conductivity and negligible specific storage. Selected type curves on a pumping well and observation wells in the fractured system and the matrix block are provided. The type curves on the pumping well considers both wellhole and well-loss effects.

• Journal of the Korean Society of Safety
• /
• v.6 no.3
• /
• pp.50-55
• /
• 1991

It is well known that mechanisms of fracture and crack growth depend upon material characteristics such as fracture toughness, environmental condition, cracd geometry and mechanical properties. It seems to be very important to investihate the effects of the above factors on the behavior of structural components which contain flaws for the detailed evaluation of their intehrity. In this experimental research, fracture behaviors of moterials were investigated by using Acoustic Emission(AE) technique. The fracturing processes of materials were estimated through both the tension specimens. For the detrmlnatlon of yied strength or fracture toughness, the critical applied load at the crack initiation and propagation is thought to be very important. The critical applied load(PQ) was determined through AE signal. The source of AE signal was estimated by fractography analysis. These experimental results may contribute to the safety analyses and the evaluation of strength of structures.