• KIEAE Journal
• /
• v.10 no.4
• /
• pp.75-80
• /
• 2010

Generally, ground-source heat pump (GSHP) systems have a higher performance than conventional air-source systems. However, the major fault of GSHP systems is their expensive boring costs. Therefore, it is important issue that to reduce initial cost and ensure stability of system through accurate prediction of the heat extraction and injection rates of the ground heat exchanger. Conventional analysis methods employed by line source theory are used to predict heat transfer rate between ground heat exchanger and soil. Shape of ground heat exchanger was simplified by equivalent diameter model, but these methods do not accurately reflect the heat transfer characteristics according to the heat exchanger geometry. In this study, a numerical model that combines a user subroutine module that calculates circulation water conditions in the ground heat exchanger and FEFLOW program which can simulate heat/moisture transfer in the soil, is developed. Heat transfer performance was evaluated for 3 different types ground heat exchanger(U-tube, Double U-tube, Coaxial).

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.229-233
• /
• 2007

This study is to test the applicability of QuickBird image for non-point source pollution assessment. SWAT (Soil and Water Assessment Tool) model was adopted and the model was calibrated for a stream watershed of 255.4 $km^2$ Landsat land use data. For model application with QuickBird image, a precise agricultural land use map of 1.16 $km^2$ area located in the upstream watershed was produced by field investigation. The model was run with the combination of land use and soil map scales (1:5,000, 1:25,000 and 1:50,000). The results were compared and analyzed for the contribution of non-point source pollution by the land use scale and contents.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.E
• /
• pp.1-11
• /
• 1992

Increasing national concern on nonpoint source pollution of surface and ground water Systems has led researchers and policy makers to develop certain agricultural Best Management Practices. As an initial step of broad study program above mentioned, this study reflected the effects of different tillage practice on bulk density and degree of saturation on two regional soils, namely Tama silt loam and Catlin silt loam. Results may help to clarify some of the conflicting findings on the impact of tillage systems on these parameters and it may also explain some of the reasons for specific role that different tillage systems play regarding nonpoint source pollution from agricultural fields.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.31-33
• /
• 2005

• The Korean Journal of Ecology
• /
• v.28 no.4
• /
• pp.189-192
• /
• 2005

We tested the field adaptation of Betula schmidtii on the abandoned coal-mine soil with sludge amendment methods for promoting physiological activity of B. schmidtii seedlings under several environmental stress. Sewage sludges were amended to coal-mine soil with B. schmidtii seedlings which grown in the mixture of artificial soil and composted sludge soil before transplanting (before-fertilized treatment, BF) and fertilized with composted sludge after transplanting (after-fertilized treatment, AF). The percent of establishment of seedlings for AF (80.7%) was lower than that for BF (92.7%). Nitrate reductase activity and photosynthetic pigment content were higher in AF than in BF, but malondialdehyde (MDA) content and superoxide dismutase (SOD) activity were lower in AF than in BF These results represent that after-fertilized seedlings increase resistance against physiological stress at field condition using nitrogen source of composted sludge. On the contrary, before-fertilized seedlings were susceptible to environmental stress on abandoned coal-mine soil by exhausting of nitrogen source from composted sludge.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.1
• /
• pp.87-95
• /
• 1983

This study was conducted to evaluate the affect of soil conditioners and their application rates on the growth, Yield and quality of Flue-cured tobacco. Soil conditioners for this study were Montmorillonite arid Zeolite as clay mineral source and Rice hull and Sawdust as organic source. Their application rates were 500, 1000, 2000kg/10a. The growth of tobacco plants was promoted, compared with that of Non- treated plot (control) by Zeolite, Montmorillonite and Rice hull application but decreased by Sawdust application. During tobacco growing season soil moisture content, compared with control, was increased by Zeolite and Montmorillonite application but decreased by Rice hull and Sawdust application. In contrast to soil moisture content, soil temperature was higher in the Rice hull and Sawdust plot than in the plot of Zeolite and Montmorillonite. The treatment of Sawdust, compared with control, obviously accelerated the maturity of tobacco, increased reducing Sugar but decreased total alkaloids, nicotine and nitrogen content of cured leaves. The Sawdust Plot decreased the Yield (kg/10a) with significant difference by 1 %level but significantly increased leaf quality (Won/kg) and value (Won/10a) by 1%and 5 %level, respectively. The present application , ate of Nitrogen in Korea (12.5kg/10a) seems to be excessive for Flue-cured tobacco production.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.27-35
• /
• 2012

Recently, there has been increasing interest in the use of rain garden systems as environmentally friendly ecological infrastructures for controlling stormwater runoff and managing non-point source pollution and information for the contamination of soil and plants can be essential for sustainable rain garden management. In this study, four rain garden mesocosms, namely single species planting with Rhododendron lateritium, single species planting with Zoysia japonica, mixed planting with R. lateritium and Z. japonica, and control without plants, were tested to investigate the change in concentrations of nutrients (N and P) and heavy metals (Cd, Cu, Pb, and Ni) in the soil and plants used in the rain garden system. The presence of plants resulted in greater nutrient retention in soil and lower potential leaching from the system. All systems showed an increase in the heavy metal concentrations in soil. The concentrations of most heavy metals were found to be higher in the herbaceous plants (Z. japonica) than in the shrubs (R. lateritium). The belowground part (root) had higher heavy metal concentrations than the aboveground part (leaf) but also showed a potential increase in leaves, and hence, careful plant management should be considered during rain garden operation.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.287-291
• /
• 1999

In order to examine the possible use of rock phosphate as P source, tomato seedlings with or without inoculation of arbuscular mycorrhizal fungi were grown in the pots of sterile volcanic ash soil from Cheju island with two levels of phosphorus (100 and 200 mg/kg) supplied either as fused or as rock phosphate. After three months of culture, plant dry weight, P and other nutrient uptake, root colonization and spore density in the soil were determined. Treatments of rock phosphate of both levels resulted in the significantly depressed plant growth in comparison to the treatments of fused phosphate, likely due to lower P availability in soil with rock phosphate. Mycorrhizal fungi inoculation increased the dry weight of plant at 200 mg/kg level of both fused and rock phosphate. Root infection and sporoulation were reduced in rock phosphate treatments. Nitrogen, K, Ca and Mg contents in plants were not significantly different at all treatments. As a P source, rock phosphate in combination with mycorrhizae was not satisfactory for optimum plant growth at $100{\sim}200\;mg/kg$ levels in Cheju volcanic ash soil.

• Journal of Korean Society on Water Environment
• /
• v.24 no.4
• /
• pp.465-472
• /
• 2008

Soil and Water Assessment Tool (SWAT) model was selected as a tool for assessing the effect of pollutant sources on the total loads from the Chungju Dam upstream watershed. The model was constructed through calibration of parameters related to nitrogen (N) and phosphorus (P), which was based on the runoff and sediment modeling performed in the previous research. Using this, the spatial and temporal pollutant loadings by source type were investigated. Results of this study indicated that in most forested upstream sub-watersheds, pollutant loadings from point sources were very low, and total loadings by point and non-point sources were also insignificant. On the other hand, in #14 sub-watershed including Jecheon city, the loadings by point source were relatively considerable. For the whole watershed, non-point sources accounted for 99% of sediment, 97% of N, and 93% of P loads. And monthly non-point source loadings were concentrated on rainy summer season, while point source loadings of N and P kept nearly constant throughout the year and were high on dry winter season relative to non-point source.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.2
• /
• pp.87-98
• /
• 2022

This study aims to prepare a technical protocol for identifying the source of nitrate in water using nitrogen (δ¹⁵N) and oxygen (δ¹⁸O) stable isotope ratios. The technical processes for nitrate sources identification are composed of site investigation, sample collection and analysis, isotope analysis, source identification using isotope characteristics, and source apportionment for multiple potential sources with the Bayesian isotope mixing model. Characteristics of various nitrate potential sources are reviewed, and their typical ranges of δ¹⁵N and δ¹⁸O are comparatively analyzed and summarized. This study also summarizes the current knowledge on the dual-isotope approach and how to correlate the field-relevant information such as land use and hydrochemical data to the nitrate source identification.