• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1229-1233
• /
• 2010

In event-driven wireless sensor networks, network congestion occurs when event data, which have higher transmission rates than periodic sensing data, arc forwarded to bottleneck links. As the congestion continues, congestion collapse is triggered, so most of packets from source nodes are failed to transmit to a sink node. Rate control schemes can be a solution for preventing the congestion collapse problem. In this paper, a rate control scheme that each node controls child node's data rate based on congestion patterns is proposed. Experiments show that the proposed scheme effectively controls network congestion and successfully transmits more event data packets to a sink node than existing rate control schemes.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.547-564
• /
• 2001

In this paper a simulation has been performed to compare and evaluate the performance between the EPRCA(Enhanced Proportional Rate Control Algorithm) and EMRCA(Explicit Max_min Rate Control Algorithm) switches. The variation of the ACR at the source end system, the queue length, the utilization rate of the link bandwidth and the share fairness at the transient and steady states are used as the evaluation criteria for the simulation. The EMRCA switch is more stable than the EPRCA switch and reduces its buffer size. Also, it achieves a higher utilization rate of the link bandwidth than the EPRCA switch. The hardware complexity of the EMRCA switch is significantly lower than the EPRCA and other rate-based switches. Since it eliminates the necessity of the floating-point operation for calculation of the MACR(Mean Allowed Cell Rate) at the switch.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.670-677
• /
• 1998

Many of the adaptive noise control systems utilize a form of the least mean square (LMS) algorithm. In the active control of noise, it is common practice to locate an error microphone far from the control source to avoid the near-field effects by evanescent waves. Such a distance between the control source and the error microphone makes a certain level of time-delay inevitable and, hence, may yield undesirable effects on the convergence properties of control algorithms such as filtered-x LMS. This paper discusses the dependence of the convergence rate on the acoustic error path in these popular algorithms and introduces new algorithms which increase the convergence region regardless of the time-delay in the acoustic error path. Performances of the new LMS algorithms are presented in comparison with those by the conventional algorithms based on computer stimulations and experiments.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.525-530
• /
• 2003

This paper focuses on design of nonlinear power plant controller using immune based multiobjective fuzzy approach. The thermal power plant is typically regulated by the fuel flow rate, the spray flow rate, and the gas recirculation flow rate. However, Strictly maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature. the change of the dynamic characteristics in the steam-turbine system. Up to the present time, PID Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. These parameters tuned by multiobjective based on immune network algorithms could be used for the tuning of nonlinear power plant.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.17 no.4
• /
• pp.68-78
• /
• 2021

In order to solve the increasing deterioration of the energy shortage problem, ground-source heat pump (GSHP) systems have been widely installed. The control method is a significant component for maintaining the long-term performance and for reducing operation cost of GSHP systems. This paper presents the measurement and analysis results of the cooling performance of a GSHP system using capacity control with outdoor air temperature. For this, we installed monitoring equipments including sensors for measuring temperature, flow rate and power consumption, and then monitored operation parameters from July 9, 2021 to October 2, 2021. From measurement results, we analyze the effect of capacity control with outdoor air temperature on the cooling performance of the system. The average performace factor (PF) of the heat pump was 6.95, while the whole system was 5.54 over the measurement period. Because there was no performance data of the existing GSHP system, it was not possible to directly compare the existing control method and the outdoor air temperature method. However, it is expected that the performance of the entire system will be improved by adjusting the temperature of cold water produced by the heat pump, that is, the temperature of cold water on the load side according to the outside air temperature.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.411-417
• /
• 2007

The rate control is an essential component in video coding to provide better quality under given coding constraints, such as channel capacity, frame rates, etc. In general, source data cannot be described as a single distribution in a video coding, hence it can cause an exhaustive approximation problem. It drops a coding efficiency under weak channel environments, such as mobile communications. In this paper, we design a new quantization parameter decision model that is based on a rate-distortion function of generalized Gaussian distribution. In order to adaptively express various source data distribution, we decide a shape parameter by observing a ratio of samples, which have a small value. For experiment, the proposed algorithm is implemented into H.264/AVC video codec, and its performance is compared with that of MPEG-2 TM5, H.263 TMN8 rate control algorithm. As shown in simulation results, the proposed algorithm provides an improved quality rather than previous algorithms and generates the number of bits closed to the target bits.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.40.1-40
• /
• 2001

In this paper, control theoretic approaches are proposed to guarantee QoS (Quality of Series) such as packet delay and packet loss of real-time traffic in high-speed communication network. Characteristics of variable rate real-time traÆc in communication networks are described. The mathematical model describing networks including source and destination nodes are suggested. By a traffic control mechanism, it is shown that worst-case end-to-end transfer delay of traffic can be controlled and packet loss can be prevented. The simulation shows results of delay control and buer level control to raise QoS in realtime traffic.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.70.2-70
• /
• 2002

In the thermal power plant, it is difficult to maintain strict control of the steam temperature in order to avoid thermal stress, because of variation of the heating value according to the fuel source, the time delay of changes in main steam temperature versus changes in fuel flow rate, difficulty of control on the main steam temperature control and the reheater steam temperature control system owing to the dynamic response characteristics of changes in steam temperature and the reheater steam temperature, fluctuation of inner fluid water and steam flow rates widely during load-following operation. Up to the present time, the PID controller has been used to operate this system...

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.65-70
• /
• 1999

In ATM network there exist several traffics according to QoS, such as CBR, rt-VBR, nrt-VBR, UBR, and ABR. Many studies have done at the traffic management of ABR which uses the unused network bandwidth. Many flow control mechanisms have proposed to use efficiently the unused bandwidth. In TMWG(Traffic Management Working Group) of ATM Forum, there exist rate-based, credit-based, and mixture of them to manage flow control of ABR traffic. Among these, rate-based mechanisms adopted as standard because it is flexible and also makes it possible to implement ATM switch with low price and high capacity. In this paper, we study the switch that uses EFCI, ER and VS/VD(Virtual Source/Virtual Destination) with rate-based mechanism. Instead of using queue threshold, we propose a new algorithm which uses bandwidth threshold of input stage of switch, and manages efficiently ABR traffic with EPRCA algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.1003-1011
• /
• 2011

In this paper, a real-time multi-source sensor data management system based on wireless sensor network is proposed and implemented. The proposed management system is designed to transmit the wireless data to the server in order to monitor and control the multi-source target's status efficiently by analyzing them. The proposed system is implemented to make it possible to control and transmit the wireless sensor data by classifying them, of which data are issued from the clustered sources composed of a number of the remote multiple sensors. In order to evaluate the performance of the proposed system, we measure and analyze both the transmission delay time according to the distance and the data loss rate issued from multiple data sources. From these results, it is verified that the proposed system has a good performance.