• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.891-900
• /
• 1996

The vision sensor which is based on the optical triangulation theory with the laser as an auxiliary light source can detect not only the seam position but the shape of seam. In this study, a vision sensor using the scanning laser beam was investigated. To design the vision sensor which considers the reflectivity of the sensing object and satisfies the desired resolution and measuring range, the equation of the focused laser beam which has a Gaussian irradiance profile was firstly formulated, Secondly, the image formaing sequence, and thirdly the relation between the displacement in the measuring surface and the displacement in the camera plane was formulated. Therefore, the focused beam diameter in the measuring range could be determined and the influence of the relative location between the laser and camera plane could be estimated. The measuring range and the resolution of the vision sensor which was based on the Scheimpflug's condition could also be calculated. From the results mentioned above a vision sensor was developed, and an adequate calibration technique was proposed. The image processing algorithm which and recognize the center of joint and its shape informaitons was investigated. Using the developed vision sensor and image processing algorithm, the shape informations was investigated. Using the developed vision sensor and image processing algorithm, the shape informations of the vee-, butt- and lap joint were extracted.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.207-218
• /
• 2013

대형 사력댐의 내진성능 평가에서 필히 요구되는 입력상수는 사력재료, 코아매질의 전단파 속도이다. 이를 표면파 시험으로 평가하기 위해서는 사력골재의 불연속, 매질의 비균질, 사면 경계면 등 표면파 시험결과의 신뢰도를 떨어뜨리는 조건을 극복해야 한다. 본 연구에서는 이러한 표면파시험의 한계를 극복하기 위하여 기존 빔형성기법의 원리를 응용한 SBF (Short-Array Beamforming) 기법을 제안하였다. SBF 기법은 3~9 m의 짧은 측선과 원거리 발진원을 이용함으로써, 빔형성기법 고유의 장점인 측정자료의 자동화분석뿐만 아니라 근접장 문제의 해결, 국부적 이상대의 발견 등의 기능을 가지도록 개발되었다. 본 연구에서는 이러한 SBF 기법과 IRF(Impulse-Response Filtration) 기법을 활용하여 대형 사력댐의 전단파속도를 신뢰성 있게 평가하는 방법을 정립하였다. 정립된 기법은 사력댐의 사력재료와 유사한 암버럭으로 매립 성토된 철도 노반에서 다운홀 시험, CapSASW (Common-Array-Profiling SASW) 시험과의 비교를 통하여 그 신뢰성과 실용성을 검증하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권10호
• /
• pp.1471-1478
• /
• 2015

The present study aimed to assess the effect of dietary substitution of soybean meal (SBM) with dehulled-micronized faba bean (Vicia faba var. minor) in guinea fowl broilers on their growth traits, carcass quality, and meat fatty acids composition. In this trial, 120 day-old guinea fowl keets were randomly assigned to two treatments which were fed from hatch to 12 weeks of age. Birds were fed two wheat middlings-based diets comprising of a control treatment which contained SBM (78.3 g/kg) and a test diet containing dehulled-micronized faba bean (130 g/kg) as the main protein source. Substituting SBM with faba bean had no adverse effect on growth traits, dressing percentage, or breast and thigh muscles relative weight of the guinea fowls. Conversely, a decrease (p<0.05) of abdominal fat was found in guinea fowls fed the faba bean-diet. Breast muscle of birds fed faba bean had higher $L^*$ score (p<0.05) and water-holding capacity (p<0.05) than the SBM control diet. Meat from guinea fowls fed faba bean had less total lipids (p<0.05) and cholesterol (p<0.01), and higher concentrations of phospholipids (p<0.01). Feeding faba bean increased polyunsaturated fatty acid concentrations in breast meat and decreased the saturated fatty acid levels. Moreover, dietary faba bean improved the atherogenic and thrombogenic indexes in guinea fowl breast meat. Results indicated that substitution of SBM with faba bean meal in guinea fowl diet can improve carcass qualitative traits, enhancing also meat lipid profile without negatively affecting growth performance.

• 한국환경농학회지
• /
• 제38권4호
• /
• pp.219-224
• /
• 2019

BACKGROUND: Soil bacteria play important roles in organic matter decomposition and nutrient cycling during the non-growing season. The purpose of this study was to investigate the effects of soil management and chemical properties on the utilization of carbon sources by soil bacteria in paddy fields. METHODS AND RESULTS: The Biolog EcoPlate was used for analyzing community-level carbon substrate utilization profiles of soil bacteria. Soils were collected from the following three types of areas: plain, interface and mountain areas, which were tested to investigate the topology effect. The results of canonical correspondence analysis and Kendall rank correlation analysis showed that soil C/N ratio and NH₄⁺ influenced utilization of carbon sources by bacteria. The utilization of carbohydrates and complex carbon sources were positively correlated with NH₄⁺ concentration. Cultivated paddy fields were compared with adjacent abandoned fields to investigate the impact of cultivation cessation. The level of utilization of putrescine was lower in abandoned fields than in cultivated fields. Monoculture fields were compared with double cropping fields cultivated with barley to investigate the impact of winter crop cultivation. Cropping system altered bacterial use of carbon sources, as reflected by the enhanced utilization of 2-hydroxy benzoic acid under monoculture conditions. CONCLUSION: These results show that soil use intensity and topological characteristics have a minimal impact on soil bacterial functioning in relation to carbon substrate utilization. Moreover, soil chemical properties were found to be important factors determining the physiological profile of the soil bacterial community in paddy fields.

• 청정기술
• /
• 제10권1호
• /
• pp.9-17
• /
• 2004

수소이온 교환 막을 가진 직접 메탄올 연료전지(DMFC)는 기존의 전력원에 비해 많은 장점을 가지고 있다. 그러나 직접메탄올 연료전지는 메탄올 crossover, 음극의 과전압, limiting current density 등 해결해야할 문제들이 있다. 직접메탄올 연료전지의 물리화학적 현상은 여러 편미분방정식들로 표현 가능하다. 본 연구에서는 이러한 편미분방정식을 풀기위해 FEMLAB를 이용하였다. FEMLAB은 PDE를 기초로 문제를 정의하고 1, 2, 3D, 비선형, 그리고 시간의 함수 형태의 편미분방정식들로 정의된 시스템을 전산모사하기위해 디자인되었다. 시스템의 메탄올 농도 분포를 알아보기 위해 촉매층에서 전기화학적반응식으로 Tafel식을 적용하여 전산모사를 수행하였다. 전산모사를 통해 음극의 촉매층에서 메탄올 농도의 급격한 감소는 직접 메탄올 연료전지의 성능저해의 요인임을 확인하였다.

• 한국결정성장학회지
• /
• 제17권6호
• /
• pp.256-263
• /
• 2007

For $P_B=50Torr,\;P_T=5401Torr,\;T_S=450^{\circ}C,\;{\Delta}T=20K$, Ar=5, Pr=3.34, Le=0.01, Pe=4.16, Cv=1.05, adiabatic and linear thermal profiles at walls, the intensity of solutal convection (solutal Grashof number $Grs=7.86{\times}10^6$) is greater than that of thermal convection (thermal Grashof number $Grt=4.83{\times}10^5$) by one order of magnitude, which is based on the solutally buoyancy-driven convection due to the disparity in the molecular weights of the component A ($Hg_2Cl_2$) and B (He). With increasing the partial pressure of component B from 20 up to 800 Torr, the rate is decreased exponentially. It is also interesting that as the partial pressure of component B is increased by a factor of 2, the rate is approximately reduced by a half. For systems under consideration, the rate increases linearly and directly with the dimensionless Peclet number which reflects the intensity of condensation and sublimation at the crystal and source region. The convective transport decreases with lower g level and is changed to the diffusive mode at $0.1g_0$. In other words, for regions in which the g level is $0.1g_0$ or less, the diffusion-driven convection results in a parabolic velocity profile and a recirculating cell is not likely to occur. Therefore a gravitational acceleration level of less than $0.1g_0$ can be adequate to ensure purely diffusive transport.

• Current Photovoltaic Research
• /
• 제2권1호
• /
• pp.28-35
• /
• 2014

High-efficiency in $Cu(In,Ga)Se_2$ (CIGS) solar cells were usually achieved on soda-lime glass substrates due to Na incorporation that reduces deep-level defects. However, this supply of sodium from sodalime glass to CIGS through Mo back electrode could be limited at low deposition temperature. Na content could be more precisely controlled by supplying Na from known amount of an outside source. For the purpose, an $Na_2S$ layer was deposited on Mo electrode prior to CIGS film deposition and supplied to CIGS during CIGS film. With the $Na_2S$ underlayer a more uniform component distribution was possible at $350^{\circ}C$ and efficiency was improved compared to the cell without $Na_2S$ layer. With more precise control of bulk and surface component profile, CIGS film can be deposited at low temperature and could be useful for flexible CIGS solar cells.

• 한국의학물리학회지:의학물리
• /
• 제31권2호
• /
• pp.9-19
• /
• 2020

Purpose: This study aims to develop a multi-purpose electron beam irradiation device for preclinical research and material testing using the research electron linear accelerator installed at the Dongnam Institute of Radiological and Medical Sciences. Methods: The fabricated irradiation device comprises a dual scattering foil and collimator. The correct scattering foil thickness, in terms of the energy loss and beam profile uniformity, was determined using Monte Carlo calculations. The ion-chamber and radiochromic films were used to determine the reference dose-rate (Gy/s) and beam profiles as functions of the source to surface distance (SSD) and pulse frequency. Results: The dose-rates for the electron beams were evaluated for the range from 59.16 Gy/s to 5.22 cGy/s at SSDs of 40-120 cm, by controlling the pulse frequency. Furthermore, uniform dose distributions in the electron fields were achieved up to approximately 10 cm in diameter. An empirical formula for the systematic dose-rate calculation for the irradiation system was established using the measured data. Conclusions: A wide dose-rate range electron beam irradiation device was successfully developed in this study. The pre-clinical studies relating to FLASH radiotherapy to the conventional level were made available. Additionally, material studies were made available using a quantified irradiation system. Future studies are required to improve the energy, dose-rate, and field uniformity of the irradiation system.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.74-78
• /
• 2003

본 논문에서는 금속의 표면 플라즈몬 공명으로 인한 금속-유전체 경계면에서의 국소적 전자기장의 강화 효과를 이용하여 표면 플라즈몬을 유발하는 금 박막을 유리 기판위에 증착하고, 프리즘 커플러를 이용한 소산장의 공명 흡수현상을 이차원 영상 으로 얻었다. 특히 DNA/단백질 칩 등 향후 가능한 다채널 시스템에의 응용을 고려하여11-MUA, 11-MUOH 등 자기조립 단분자막(SAM)을 크롬 마스크와 리토그래피, 그리고 Shadow mask와 광 산화반응을 이용하여 금 표면 위에 패터닝 하였다. 텅스텐-할로겐 램프와 중심파장이 ${\lambda}_0=633$ nm의 대역통과 필터를 사용하여 이 평행광을 프리즘 커플러에 입사시켜 반사되어 나오는 반사광의 이차원 영상을 얻었다. 이와는 별도로 ${\lambda}_0=633$ nm의 레이저를 이용하여 단분자막이 코팅되어 있을 때와 없을 때의 공명각의 변화를 관찰하였다. 얻어진 이차원 영상의 위치에 따른 화소 값의 변화를 단분자 막의 두께의 변화에 따라 보정하고, 알려진 매질의 SPR 특성을 Fresnel 방정식에 따라 이론적으로 계산하면 다채널 표면 영상으로부터 항원-항체 등 단백질의 결합 정도를 정량적으로 측정할 수 있다.

• BMB Reports
• /
• 제36권5호
• /
• pp.493-498
• /
• 2003

The scFv antibody towards the Burkholderia pseudomallei exotoxin was previously constructed by phage display and exhibited good specificity towards the exotoxin. We report here the optimization of the scFv expression in an E. coli expression system. Four different E. coli strains (ER2537, TG1, HB2151, and XL1-Blue) were examined for optimal expression of the scFv protein. Two types of carbon source (i.e. 0.2% glucose and 0.2% glycerol) were also tested for their ability to induce the scFv expression. Cells that carried the scFv construct were grown at $30^{\circ}C$ and induced with 0.05 mM IPTG. The expression was then monitored by SDS-PAGE, Western blotting, and indirect ELISA. The Western blot profile showed different levels of the scFv expression among the host strains; XL1-Blue exhibited the highest level of the scFv protein expression. Glycerol at a concentration of 0.2% (v/v) significantly increased the scFv protein expression level when compared to 0.2% (w/v) glucose. Further optimization demonstrated that the scFv protein expression in XL1-Blue was the most optimal with a glycerol concentration as low as 0.05%. However, by indirect ELISA, only the scFv protein that was expressed in 0.2% (v/v) glycerol exhibited high specificity towards the Burkholderia pseudomallei exotoxin.