• 한국해양공학회지
• /
• 제9권2호
• /
• pp.75-82
• /
• 1995

The free surface effects on the aerodynamic performance of 2-D wings are investigated based on the potential flow approximation. The wing is represented b source and vortex distributions on the wing surface. The steady free surface effect is taken into account by source distribution on the free surface and the velocity potentials of air and water flows are obtained. Using three different techniques, namely, positive image method, inverse image method and source distribution method, numerical results are obtained for wave elevation, pressure distribution and lift coefficient with various foil sections. The wave elevation calculated by the inverse image method is shown to be very small even at higher speeds so that the free surface effect on the performance of wings is regraded negligible. However, the wave elevations by the positive image method and source distribution method are relatively high at higher speeds and accordingly the free surface effects on wings can not be neglected.

• 한국안전학회지
• /
• 제13권1호
• /
• pp.26-33
• /
• 1998

This paper subdivided the interior solid into triangular shape of equal size to calculate the temperature distribution around the square heat source of it, and compared calculated values with measured ones. The result obtained are as follows. 1) It was found that we can calculate the temperature distribution around the square heat source of interior solid by the variational method of the finite element method as the calculated values were almost accord with the measured ones. 2) The temperature distributed were higher when the distances between heat source were farther and lower when those nearer. 3) Vertical surface temperature distribution is remarkably efficient by thermal conductivities.

• 한국음향학회지
• /
• 제23권1호
• /
• pp.40-46
• /
• 2004

등가음원법은 일반적으로 실내에 위치한 음원에 의한 실내 음장을 모델링하기 위하여 원거리에 위치한 다수의 등가음원과 상대적으로 근방에 위치한 소수의 이미지음원들을 사용한다. 원거리음원은 일반적으로 실내 음장의 중심으로부터 적당히 먼 거리에 균일하게 위치시킨다. 이러한 원거리음원의 위치는 적절한 선택 여부에 따라, 계산 결과의 정확도와 이를 만족시키기 위해 필요한 음원의 수에 큰 영향을 미치게 된다. 본 연구에서는 등거리 상의 가상의 구형 표면에 위치시키는 기존의 방법 대신 모델링하는 실내 공간의 경계면과 닮은 꼴 형상으로 배치하여 그 영향을 조사하였다. 즉 가상의 직육면체 표면에 격자 형태로 균일하게 원거리음원들을 배치시키되, 음장의 중심으로부터의 거 리를 변화시켜가며 각 경우에 대하여 최적화 기법을 이용하여 최적의 원거리음원 위치들을 찾아내어 비교, 분석하였다.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1623-1629
• /
• 2003

In this paper, the arc beam is considered as a moving disc heat source with a pseudo-Gaussian distribution of heat intensity. The solution for temperature distribution on welds is derived by using the image heat source method and the superposition method. It is general solution in that it can determine the temperature-rise distribution in and around the arc beam heat source, as well as the width and depth of the melt pool (MP) and the heat-affected zone (HAZ) in welding short lengths, where quasi-stationary conditions may not have been established. As a comparative study, the results of this analytical approach has been compared with that of the finite-element modeling. As a result, The theoretical analysis presented here has shown good consistency and is more time/cost-effective method compared with FEM.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1347-1354
• /
• 2020

To improve the efficiency of MC criticality calculation, an acceleration method of fission source convergence which gives an improved initial fission source is proposed. In this method, the MC global homogenization is carried out to obtain the macroscopic cross section of each material mesh, and then the nonlinear iterative solution of the SP3 equations is used to determine the fission source distribution. The calculated fission source is very close to the real fission source, which describes its space and energy distribution. This method is an automatic computation process and is tested by the C5G7 benchmark, the results show that this acceleration method is helpful to reduce the inactive cycles and overall running time.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.70-81
• /
• 2019

An improved three dimensional Rankine source method is developed to solve numerically water wave problems in time domain. The free surface and body surface are both represented by continuous panels rather than a discretization by isolated points. The integral of Rankine source 1/r on free surface panel is calculated analytically instead of numerical approximation. Due to the exact algorithm of Rankine source integral applied on the free surface and body surface, a space increment free surface source distribution method is developed and much smaller amount of source panels are required to cover the fluid domain surface than other numerical approximation methods. The proposed method shows a higher accuracy and efficiency compared to other numerical methods for various water wave problems.

• Nuclear Engineering and Technology
• /
• 제30권3호
• /
• pp.235-244
• /
• 1998

The parametric model method determines the accident source term which is Presented by a set of source term parameters. In this method, the cumulative distribution of each source term parameter should be derived for its uncertainty analysis. This paper introduces a method of generating the parameters in the form of cumulative distribution using MAAP version 4.0. In MAAP, there are model parameters which could incorporate uncertain physical and/or chemical phenomena. In general, the model parameters do not have a point value but a range. In this paper, considering that, the input values of model parameters influencing each parameter are sampled using LHS. Then, the computation results are shown in cumulative distribution form. For a case study, the CDFs of FCOR and WES of Kori Unit 1 are derived. The target scenarios for the computation are the ones whose initial events are large LOCA, small LOCA and transient, respectively. It is found that the computed CDF's in this study are consistent to those of NUREG-1150 and the use of MAAP is proven to be adequate in assessing the parameters of the severe accident source term.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.22-24
• /
• 1998

The current distribution in the source coil region is analyzed using the two dimensional finite element method. The variables in the FEM are the magnetic vector potentials and the source current density. The boundary condition for the source current density is that the total current is the sum of the eddy current and the source current and is known quantity from measurement. The simulation results are compared with the analytical solution. It is found that the method can analyze the current distribution in the source conductors very accurately.

• 한국의학물리학회지:의학물리
• /
• 제1권1호
• /
• pp.85-90
• /
• 1990

Berger formulation was used to calculate the dose distribution of $^{60}$ Co source in tissue. $^{60}$ Co source was supposed as point source. The effect of the stainless-steel around the source was considered and Taylor Approximation Method was used for calculating exposure build-up factor. Calculated depth dose data was compared with measured data which was measured by the ionization chamber.

• 조명전기설비학회논문지
• /
• 제21권6호
• /
• pp.19-25
• /
• 2007

특정한 배광 구현을 위하여 부피를 갖는 실제 광원에 대한 프리즘 설계법을 연구하였다. 입사각을 알고 목표 방향으로 광선을 보내려 할 때, 프리즘 정각을 구하는 수식을 유도하였고, 순차적으로 프리즘 정각을 구하였다. 점광원으로 가정한 설계 결과의 문제점을 분석한 후 이를 보완하여 부피를 갖는 광원에 적용할 수 있는 설계법을 도출하였다. 각각의 설계 결과로 나온 배광과 효율을 비교, 분석하였고 보완된 설계법을 통해 개선된 결과를 얻을 수 있었다.