• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.9
• /
• pp.1263-1271
• /
• 2001

An experimental study is carried out for an aluminum foam heat sink attached to an isolated heat source to evaluate high potential of aluminum foam as a heat sink with impinging jets. The effects of the pore density and the height of the aluminum foam heat sink, the jet Reynolds number, and the nozzle diameter are delineated in comparison with a conventional pin type heat sink. It is found that the aluminum foam with small pores is inefficient for the heat transfer enhancement due to the large flow friction at the given porosity. In the parameter ranges of the present study, the change in the nozzle diameter shows no significant effects on the surface temperature of the aluminum foam heat sink at a given Reynolds number. The heat transfer enhancement is strongly dependent on the jet Reynolds number and shows a maximum value at a moderate Reynolds number.

• Journal of Information Processing Systems
• /
• v.14 no.6
• /
• pp.1347-1360
• /
• 2018

Owing to limited energy in wireless devices power saving is very critical to prolong the lifetime of the networks. In this regard, we designed a cross-layer optimization mechanism based on power control in which source node broadcasts a Route Request Packet (RREQ) containing information such as node id, image size, end to end bit error rate (BER) and residual battery energy to its neighbor nodes to initiate a multimedia session. Each intermediate node appends its remaining battery energy, link gain, node id and average noise power to the RREQ packet. Upon receiving the RREQ packets, the sink node finds node disjoint paths and calculates the optimal power vectors for each disjoint path using cross layer optimization algorithm. Sink based cross-layer maximal minimal residual energy (MMRE) algorithm finds the number of image packets that can be sent on each path and sends the Route Reply Packet (RREP) to the source on each disjoint path which contains the information such as optimal power vector, remaining battery energy vector and number of packets that can be sent on the path by the source. Simulation results indicate that considerable energy saving can be accomplished with the proposed cross layer power control algorithm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.243-250
• /
• 2004

Two cultivars which are glutinous (Hawcheongchalbyeo) and non-glutinous (Hawcheongbyeo) near isogenic line of rice, were used for this study. The objective of this experiment was to gain the basic information for increasing grain yield of waxy rice by means of source and sink size control. In both Hwacheongbyeo and Hawcheongchalbyeo, the trend of decrease in total and average spikelet weight was ranked as follows; removal of penultimate leaf＜ removal of flag leaf＜ removal of flag leaf and 3ya leaf from the top ＜ removal of flag leaf and penultimate leaf ＜ removal of flag leaf, penultimate leaf, and 3rd leaf from the top. The reduction yale of total and average spikelet weight per panicle of Hwacheongbyeo was higher than those of Hwacheongchalbyeo according to the removal of flag leaf, penultimate leaf, and 3rd leaf from the top. In both cultivars, high-density grain ratio and grain filling ratio of the primary branches were higher Hun those of the secondary branches by leaf clipping treatment. The spikelet number and total spikelet weight per pinicle in both Hwacheongbyeo and Hwacheongchalbyeo were decreased by removal of spikelets on branches compared with control, whereas average spikelet weight and grain filling ratio were increased. The increase rate of average spikelet weight of Hwacheongchalbyeo was much higher than that of Hwacheongbyeo by sink size control. High-density grain ratio by removal of spikelets on branches was higher in Hwacheongchalbyeo, but filled grain ratio was higher in Hwacheongbyeo.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.4
• /
• pp.392-402
• /
• 1987

To know the effect of presowing seed soaking with some growth substances (kinetin, IAA, ethrel and salicylic acid) on vegetative growth and yield contributing parameters in soybean [Glycine max (L.) Merrill] the investigation was undertaken. The salient features from the study are;-All the treatments showed the enhancement effect on vegetative growth, viz. seediling emergence, germination percentage, plant height, number of leaves and branches per plant as compared with control, whereas salicylic acid delayed the seedling emergence process and lowered the germination percentage.-Nodule initiation, number of nodules and nodule weight were hastened and increased respectively under all the treatments whereas IAA showed an opposite effect on all the parameters at the early stages of nodule development.-Kinetin, IAA and ethrel showed the significant enhancement effect on the levels of biochemical parameters throughout the time of seed development whereas salicylic acid and water showed the tendency similar to that of control.-Yield and its components, viz. number of flowers, pods and seeds per plant were significant increased under all the treatments but they didn't show any significant enhancement effect on number of seeds per pod and pod setting rate. One hundred seed weight was lower under all the treatments, indicating the dilution effect resulting from incapability of increased number and size of source to provide the increased size of sink with assimilates.

• Microbiology and Biotechnology Letters
• /
• v.24 no.2
• /
• pp.173-177
• /
• 1996

Bacillus thuringiensis subsp. morrisoni PG-14 is a gram-positive soil bacterium producing mosquitocidal parasporal inclusions composed of several crystal proteins. Among these crystal protein genes, cryIVD gene is one of major component which has 72 kDa in size. However, these parasporal inclusions sink quickly from the surface of water where mosquito larval feeding occurred. To develope mosquitocidal cyanobacterium, therefore, we constructed the expression vector, pCYASK 5-1 harboring cryIVD gene. The expression vector, pCYASK5-1 was transformed into the cyanobacterium Syne- chocystis PCC6803 reported as a natural mosquito larval food source and the transformants were selected with kanamycin. Expression of IVD gene in transformant was characterized by SDS-polyacrylamide gel electrophoresis (PAGE) and immunoblot analysis. The mosquitocidal activity of a transformant was determined with Culex tritaeniorhynchus. The results showed that, the transformed cyanobacterium is toxic to mosquito larvae and will be expected as a potential agent that is used for mosquito control.

• Land and Housing Review
• /
• v.13 no.3
• /
• pp.125-140
• /
• 2022

Road Deposited Sediment (RDS) is the solids formed from the wear of road, wear of vehicles, exhausts, and the input of the emissions from various sources out of the roads. RDS is seriously polluted by organic matter, nutrients, and metals. RDS plays an important role as the sink and the transport medium of the associated pollutants because RDS can be carried to the adjacent water system via stormwater runoff. In this regard, the heavy metals in RDS were investigated based on the publications. The contents of the metals in RDS were highly variable. The concentration of Cr, Ni, Cu, Fe, Zn, As, Cd, and Pb in urban RDS in various regions was in a range of 3.16-3,410, 1.15-1,382, 20.2-9,069, 2,980-124,853, 81-2,550, 2.3-214, 0.19-21.3, and 15.21-1,125 mg/kg, respectively. The anthropogenic enrichment of the metals in RDS was confirmed by the high concentration of Cu, Zn, Cd, and Pb. The contents of the metals were higher in industrial and traffic areas than in residential areas, while they were generally increased with decreasing particle size. It is believed that this study's results would contribute to quantifying the metals' load via RDS and establishing control strategies.