• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.13-20
• /
• 1999

Recently, the study for practical construction application no recycled aggregate concrete is actively being proceeded, on the purpose of technical development for recycling on the construction waste concrete occurred at the time of destruction of building construction by the rapid increase of building wastes and exhaustion of natural aggregates. But, the durability of investigation with all sorts of fluidity and engineering property for application recycled aggregate concrete to practical construction must be done at the same time. Especially, because of the real condition for chemical attack of concrete construction by the acid rain, acidification of soil, deepening of air pollution and dirty water etc. being come to the fore a serious problem, the study on the chemical soundness of concrete durability must be accompanied. This study is composed as: I series: Analysis for chemical soundness of aggregates. II series: Analysis for chemical soundness of natural and recycled aggregate concrete against $Na_2$$SO_4$ solution in drying and wet curing condition ($at20~80^{\circ}C$).

• 한국건축시공학회지
• /
• 제13권5호
• /
• pp.449-456
• /
• 2013

본 연구는 제주도 현무암 골재에 대해 콘크리트용 굵은 골재로서의 품질기준의 적합성을 평가하였다. 골재의 품질 평가는 KS 기준에서 요구하는 골재안정성, 골재마모저항성, 골재파쇄성 실험을 하였다. 더불어, 현무암 골재의 성분 분석을 위해 XRD, XRF, Porosity를 분석하였으며, 현무암의 강도는 콘크리트용 굵은 골재로서 다른 지역에서 주로 사용되는 화강암, 안산암 그리고 사암의 압축 및 인장강도 결과 값과 비교 평가하였다. 전반적으로, 골재의 기계적 특성 평가 결과, 일부 지역의 현무암 골재는 KS 기준을 만족하지 못하였다. 그러나 제주지역의 현무암의 압축강도와 인장강도는 타 지역의 암석보다 높았다.

• 자원환경지질
• /
• 제32권1호
• /
• pp.1-11
• /
• 1999

In the last decade, the supply of natural aggregates has been continuously increased due to the other types of aggregates. In general, aggregates constitute 70-80% of the total volume of concrete, so the quality of aggregates is main factor controlling physical characteristics of concrete. For this reason, physical properties of aggregate according to different rock types were studied. The majority of crushed aggregates is taken out of granite, gneiss, sandstone, andesite, basalt and so forth. The physical properties of these rock types were tested and most of them fell within the acceptable limit on the base of Korean standard regulation. The major lithology of the crushed aggregates is granite and gneiss, both of which are marked for more than 50% of total lithology thpes in Korea. A to the physical properties of granite, the high specific gravity coincides with low porosity, low absorption ratio, while the abrasion and soundness index show, in general, no specific trend. It has been assumed that slight differences of the physical properties of granite aggregates are related with those of the mineral composition, grain size, and so on. In comparison to granite, the physical properties of gneiss have little correlation one after another. This trend is related to different mineral composition, grain size and typical sheet fractures typically prevailing in the texture of gneiss. Spatial pattern of physical properties shows that high specific gravity of granite coincides only with low porosity and absorption ratio in all provinces except Cheolla province, and high specific gravity of gneiss coincides with low porosity and absorption ratio only in Cheolla and Gandwon provinces.

• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.490-502
• /
• 2012

The use of recycled aggregate, even for low-performance concrete, has been very limited because recycled aggregate, which contains a large amount of old mortar, is very low in quality. To produce a high-quality recycled aggregate, removing the paste that adheres to the recycled aggregate is very important. We have conducted research on a complex abrasion method, which removes the component of cement paste from recycled fine aggregate by using both a low-speed wet abrasion crusher as a mechanical process and neutralization as chemical processes, and well as research on the optimal manufacturing condition of recycled fine aggregates. Subsequently, we evaluated the quality of recycled fine aggregate manufactured using these methods, and tested the specimen made by this aggregate. As a result, it was found that recycled fine aggregates produced by considering the aforementioned optimal abrasion condition with the use of sulfuric acid as reactant showed excellent quality, recording a dry density of 2.4 and an absorption ratio of 2.94. Furthermore, it was discovered that gypsum, which is a reaction product occurring in the process, did not significantly affect the quality of aggregates. Furthermore, the test of mortar using this aggregate, when gypsum was included as a reaction product, showed no obvious retarding effect. However, the test sample containing gypsum recorded a long-term strength of 25.7MPa, whereas the test sample that did not contain gypsum posted a long-term strength of 29.4MPa. Thus, it is thought to be necessary to conduct additional research into the soundness and durability because it showed a clear reduction of strength.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2002년도 학술발표회 논문집
• /
• pp.89-92
• /
• 2002

본 연구의 목적은 여러 가지의 폐자원중 슬래그 및 폐주물사의 도로포장용 골재로서의 특성을 평가하고, 이를 이용한 다양한 조합의 재활용 아스팔트 혼합물의 소성변형 특성을 평가하는 것이다. 골재특성을 평가하기 위해 입도 및 입형분석, 비중 및 흡수성, 마모저항성, 골재안정성과 같은 시험을 수행하였다. 골재로서의 특성평가 시험 결과 고로슬래그는 비교적 강도 특성이 제강슬래그에 비해 작은 경향을 나타냈다. 마샬배합설계로서 최적 아스팔트 함량이 결정되었고, 그 범위는 7.2%에서 7.5%정도 였다. 재활용 골재를 이용한 조합의 아스팔트 혼합물의 소성변형 특성을 평가하기 위해 간접인장강도시험, 회복탄성계수시험, 크리프 시험을 수행하였다. 재활용 골재를 이용한 아스팔트 혼합물의 소성변형 특성이 일반골재를 이용한 아스팔트 혼합물에 비해 다소 떨어지는 경향을 나타내었다. 다만 현재진행중인 휠트래킹 시험 결과가 나오면 재활용 골재를 활용한 아스팔트 혼합물의 소성변형특성을 좀더 구체적으로 파악할 수 있을 것으로 판단된다.

• 한국농공학회지
• /
• 제45권1호
• /
• pp.74-82
• /
• 2003

In this paper, an experimental program was undertaken to test the analysis on Component and mechanical characteristics for crushed stone of excavated Rocks from Sandstone, Shale, Mudstone, for use as a new source of aggregate. Physical and mechanical properties, required for aggregate materials, of major constituents of rock wastes including Sandstone, Shale, Mudstone, Felsite, Basalt, Marl were measured in the laboratory Test results showed that the Shale, Felsite, Basalt tested in this study might possibly be used for construction aggregates. In case of Sandstone and Mudstone, some physical properties such as rock strength were generally adoptable but the aggregate characteristics were lower than required.

• 자원환경지질
• /
• 제57권2호
• /
• pp.205-217
• /
• 2024

본 연구는 제주도-울릉도 일대에 분포하는 화산암을 대상으로 골재자원으로서의 물성 특징과 골재자원으로서의 골재품질을 평가하였다. 제주도 지역의 주요 구성 암석은 역암, 화산암 및 화산쇄설암 등이다. 역암은 용암 사이에 협재된 상태로 황적색 또는 회색의 이질퇴적암, 역암, 함각력역암으로 구성되어 있다. 화산암류는 화학성분에 따라 현무암, 조면현무암, 현무암질조면안산암, 조면안산암 및 조면암류로 분류된다. 층서별로 하부에서 상부 순서대로 서귀포층, 조면안산암, 조면현무암(I), 현무암(I), 조면현무암(II), 현무암(II), 조면현무암(III, IV), 조면암, 조면현무암(V, VI), 현무암(III) 및 조면현무암(VII, VIII)으로 구분된다. 울릉도 지역의 기반암은 현무암, 조면암, 조면암질 현무암 및 조면암질 안산암으로 구성되어 있으며, 일부 포놀라이트와 응회암질 쇄설성 화산퇴적암으로 구성되어 있다. 기반암들의 골재품질 평가요소로 안정성, 마모율, 흡수율, 절대건조밀도 및 알칼리 골재 반응도 등이 고려되었다. 연구지역의 화산암류의 골재품질 평가 결과 대부분 골재 품질기준을 만족하는 것으로 나타났으며, 지역별로 물성 특징 및 품질이 다르게 나타났다. 마모율과 절대건조밀도는 유사한 분포 범위를 갖고 있으나, 안정성은 울릉도가, 흡수율은 제주도가 좋은 결과를 보였다. 전체적으로 제주도가 골재로서 더 좋은 품질을 나타내었다. 또한, 알칼리 골재 반응성 시험 결과 전반적으로 두 지역 모두 무해한 골재로 나타났으나, 제주도보다 울릉도 화산암류가 더 양호한 것으로 분석되었다. 골재품질시험은 암석 자갈을 대상으로 개략적으로 수행되지만 유사한 암석이라도 생성환경 및 광물조성에 따라 달라질 수 있다. 따라서 골재자원의 품질을 평가, 분석할 때 광물-암석학적 연구를 병행한다면 더욱 효율적으로 활용이 가능할 것이다.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.405-410
• /
• 2015

Today, the booming construction in Ethiopia is leading to an increased demolition of concrete structures whereby these demolished structures are disposed at landfills. The current practice is creating a huge amount of waste which is environmentally unfriendly and is becoming the main source of pollution in communities. This paper discusses the potential use of demolished concrete from site tested specimens as a recycled aggregate material for new structural concrete. The mechanical, physical and chemical properties of RCA are studied to understand the suitability in the production of recycled concrete. Tests including gradation, unit weight, soundness, density, and abrasion will be conducted to assess RCA properties. Since the percentage of RCA govern the strength of concrete, a C25 concrete is mixed by the ratio of 25%, 50% & 100% RCA with and without water reducing admixture and a control mixture composed of natural aggregate. The output of this study will highly impact the growing construction industry and communities in Ethiopia thereby reducing waste, saving cost, conserving natural aggregates, building capacity and setting quality standards.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.153-159
• /
• 2018

Accelerators are used to speed up the construction by accelerating the setting time which helps in early removal of formwork thus leading to faster construction rate. Admixtures are used in mortar and concrete during or after mixing to improve certain properties of material which cannot be achieved in conventional cement mortar and concrete. The various industrial by products make nuisance and are hazardous to ecosystem as well. These wastes can be used in the construction industries to reduce the consumption of cement/aggregates, cost; and save the energy and environment by utilising waste and eliminate their disposal problem as well. The effect of calcium nitrate and triethanolamine (TEA) as accelerators and marble powder (MP) as waste material on the various properties of cement paste and mortar has been studied in the present work. The replacement ratio of MP was 0-10% @ 2.5% by weight of cement. The addition of calcium nitrate was 0% and 1%; and variation of addition of TEA was 0-0.1@ 0.025% and 0.1-1.0@ 0.1% by weight of cement. On the basis of setting time, some mix proportions were selected and further investigated. Setting time and soundness of cement paste; compressive strength and microstructure of mortar mix of selected mix proportions were studied experimentally at 3, 7 and 28 days aging. Results showed that use of MP, calcium nitrate, TEA and their combination reduced setting time of cement paste for all the mixes. Addition of calcium nitrate increased the compressive strength at all curing ages while MP and TEA decreased the compressive strength. The mechanism of additives was discussed through scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) analysis of the specimens.

• 자원환경지질
• /
• 제55권6호
• /
• pp.649-659
• /
• 2022

본 연구는 충주-괴산일대에 분포하는 기반암 중 화강암, 규암, 천매암, 편암, 편마암의 골재자원으로서의 활용도를 고찰하였다. 연구지역에 분포하는 화강암류는 쥬라기 흑운모 화강암이 주를 이루고, 규암층은 계명산층과 향산리 돌로마이트 석회암 상부에 분포하는 대향산규암층으로 이루어져 있다. 또한 천매암은 옥천대 황강리층을 구성하는 함력천매암질암이고, 편암은 옥천대 문주리층인 녹니석편암, 편마암은 서창리층 상부에 해당하는 반상변정편마암으로 이루어져 있다. 본 기반암들의 골재품질 평가요소로는 조립률, 흡수율, 단위용적질량, 절대건조밀도, 실적률, 공극률, 마모율, 안정성 등이 고려되었다. 본 기반암들의 골재품질 평가 결과 대부분이 기본 골재품질기준을 만족하는 것으로 나타났으며, 암종별 물성특성 분포범위는 다르게 나타났다. 화강암의 경우, 단위용적질량, 실적률, 공극률, 마모율에서 일부 만족하지 못하는 것으로 나타났으며, 편마암은 마모율에서, 편암은 공극률과 실적률에서 기준치를 벗어났다. 전반적인 골재자원으로서의 품질은 규암, 편마암 및 천매암이 우수한 품질을 보이는 것으로 분석되었다. 골재품질시험은 암석별로 개략적으로 이루어지지만 같은 암석이라도 광물의 형상(morphology)에 다라 달라질수있다. 따라서 골재자원의 품질평가를분석, 활용 할 때 암석-광물학적 연구를 병행한다면 더욱 효율적으로 활용이 가능 할 것이다.