• Clean Technology
• /
• v.22 no.4
• /
• pp.269-273
• /
• 2016

The benzylic bromination of methoxyimino-o-tolyl-acetic acid methyl ester (1) into (2-bromomethyl-phenyl)-methoxyimino-acetic acid methyl ester (2) using N-bromosuccinimide in the presence of 2,2'-azobisisobutyronitrile in various reaction solvents were investigated. The efficiency of the reaction was found to be sensitive to the kind of reaction solvents. We found the benzylic bromination of 1 to 2 can be performed in 1,2-dichlorobenzene as reaction solvent superior to the classic Wohl-Ziegler procedure in both reaction time and isolated yield (8 h vs 12 h, 92 vs 79%). This system provides clean, rapid, and high-yielding reactions with replacement of conventional solvents, such as tetrachloromethane, by less-toxic 1,2-dichlorobenzene.

• Journal of the Korean Ceramic Society
• /
• v.50 no.4
• /
• pp.294-300
• /
• 2013

The effect of chemical treatments of porous silicon in organic solvents on its nanostructural and optical features was investigated. When the porous Si was dipped in the organic solvent with various PH values, the morphological, chemical, and structural properties of the porous silicon was sensitively affected by the chemical conditions of the solvents. The size of silicon nanocrystallites in the porous silicon decreased from 5.4 to 3.1 nm with increasing pH values from 1 to 14. After the samples were dipped in the organic solvents, the Si-O-H bonding intensity was increased while that of Si-H bonding decreased. Photoluminescence peaks shifted to a shorter wavelength region in the range of 583 to 735 nm as the pH value increased. PL intensity was affected by the size as well as the volume fraction of the nanocrystalline silicon in the porous silicon.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.310-313
• /
• 2000

Polyaniline Emeraldine Base (PANI EB) polymerized by chemical oxidative polymerization was doped with Camphorsulfonic Acid(CSA). Polyaniline-Camphorsulfonic Acid Emeraldine Salt(PANI-CSA ES) solutions were solved in organic solvents and sonificated at the room temperature for different solvents in PANI-CSA ES solution and sonification time. PANI-CSA ES solutions was coated on PET films using bar coater. 1-Step oxidatively-polymerized Polyaniline-Camphorsulfonic Acid Emeraldine Salt(PANI-CSA ES) was solved in m-cresol:chloroform 1:1 co-solvents and their solution was bar-coated on PET film. The surface resistivities of these coated films were measured, The surface resistivity of PANI-CSA ES solution in m-cresol:chloroform 1:1 co-solvent system was 5${\times}$10$^2$$\Omega$/$\square$.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.31-34
• /
• 1983

For the study of the applicability of predictive equation of subjective symptoms of workers using organic solvents, 67 male workers using organic solvents were selected. The predictive equation was quotated from previous Cheon's study. All the datas of necessary variables were gained. The predictive values and observed values were compared. The results were summarized as below; 1. The difference between predictive values and observed values were characteristically large. The coefficient of determination between the two values was 0.0024. 2. The $R^2$ value of multiple stepwise regression equation derived from present study was 0.2827.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.1-6
• /
• 2013

The ionic liquids are known to potential alternative solvents capable of replacing the commercial solvents in various processes including those in nuclear fuel cycle. As to the material, a number of studies have already reviewed the interesting results and addressed the spectroscopic as well as electrochemical behaviors of metal elements included in spent nuclear fuels. It has found that the important properties of metal ions in TBP dissolved ILs have led the development of alternative technologies to traditional solvent extraction processes. On the other hand, the electrochemical deposition of metal ions in ILs have been investigated for the application of the solvents to aqueous as well as to non-aqueous processes. In this work, a review on the application of ILs in nuclear fuel cycle is briefly presented to understand the notable researches on ILs focusing on aqueous processes.

• Textile Coloration and Finishing
• /
• v.2 no.1
• /
• pp.1-7
• /
• 1990

The cleaning resistance of tanned chrome garment leathers was investigated by using drycleaning solvents. Hydrocarbon, perchloroethylene and fluorocarbon (F-113) were used as solvent. Various test methods, such as color difference test, surface view by scanning electron microscope, mechanical properties measured by KES-FB System and their hand values and wearing abilities are carried out in this study. The results can be obtained as follows: 1. Fluorocarbon type (F-113) was demonstrated a suitable solvent for drycleaning of leather. 2. Perchloroethylene showed the worst in fading and stiffening among three different types of solvents.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.128-131
• /
• 1996

From Raman spectra, the ${\nu}g$C=O frequencies of 4-substituted benzaldehydes were found to correlate with the ${\sigma}_p$ values of the 4-x atom or group as well as the acceptor number (AN) values of solvents. In various solvents, the ${\nu}g$C=O frequency of benzaldehyde decreased upon the increase of benzaldehyde concentration. This shift was mainly due to the hydrogen bonding between the carbonyl oxygen and/or aldehydic proton of benzaldehyde and the solvent molecules. Over the 1-80 volume % change, the ${\nu}g$C=O frequency of benzaldehyde down shifted from 1709.4 $cm^{-1}$ to 1700.2 $cm^{-1}$ in CCl4 solution and from 1703.0 $cm^{-1}$ to 1698.0 $cm^{-1}$ in $C_2H_5OH$ solution. This is due to the fact that hydrogen bonding between the benzaldehyde and C2H5OH was much stronger than that between the benzaldehyde and the other solvents.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.341-344
• /
• 1987

The fluorescence quantum yield of khellin is sensitive to temperature and to the nature of solvents, especially the proton-donating ability in solute-to-solvent hydrogen bonding. The intersystem crossing quantum yields are 0.4 and 0.15 in acetonitrile and ethanol, respectively. The fluorescence quantum yields in ethanol and isopentane at 77 K are 0.61 and 0.07, respectively, both of which are much larger than the values at room temperature. The phosphorescence lifetime is relatively long and decreases with decreasing solvent polarity. The phosphorescence to fluorescence quantum yield ratio is very small and remains unchanged in various solvents. The results suggest that internal conversion is an important decay channel of the excited singlet state of khellin, especially in the hydrogen-bonding hydroxyl solvents.

• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.147-152
• /
• 2010

Poor fruit set during winter period is one of the biggest problem in plastic tunnel watermelon cultivation. Hand pollination is inevitable to maximize fruit set of the winter watermelon. Productivity and viability of pollen grain and organic solvents for pollen storage were investigated. All cultivars produced more than 10 mg/flower except for 'Kumchun' cultivar. Pollen amount per flower were 13.8 mg in 'Bok' and 12.1 mg in 'Speedkul'. Germination rate of pollen grains incubated at $30^{\circ}C$ right after soaking in pentane solvent were 76% in 'Kumchun' as the lowest and 92% in 'Apollokul' as the highest. The pollen of 'Bok' showed the highest germination rate by 75% after a 15-day storage in pentane. All cultivars showed their pollen germination rate below 25% after a 24-day storage. Among the cuitivars, speed of pollen tube growth in vitro were relatively lower in 'Kumchun' and 'Sambokkul' by below $50\;{\mu}m/hr$. Pollen tube of these cultivars tended to burst during its elongation on the medium. Pollen stored 24 hrs in organic solvents showed 45, 39, 34, 23, and 19% of germination in pentane, ethyl ether, n-hexane, ethyl acetate, and acetone, respectively. Compared with light condition, pollen viability was higher in darkness during pollen storage in organic solvents. Pollen grain was susceptible to the organic solvent. The viability of pollen grains seems to be influenced greatly by duration of soaking pollen in organic solvent and the polarity of solvents. Organic solvent damages surface of pollen grain and extent of damage was varied by the solvents.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.5
• /
• pp.61-67
• /
• 2010

In this study, Solid-phase microextraction (SPME) with GC/FID was studied as a possible alternative to liquid-liquid extraction for the analysis of chlorinated solvents (PCE and TCE) and these by-products (cis-DCE, VC, and Ethylene). Experimental parameters affecting the SPME process (such as kind of fibers, adsorption time, desorption time, volume ratio of sample to headspace, salt addition, and magnetic stirring) were optimized. Experimental parameters such as CAR/PDMS, adsorption time of 20 min, desorption time of 5 min at $250^{\circ}C$, headspace volume of 50mL, sodium chloride (NaCl) concentration of 25% combined with magnetic stirring were selected in optimal experimental conditions for analysis of chlorinated solvents and these by-products. The general affinity of analytes to CAR/PDMS fiber was high in the order PCE>TCE>cis-DCE>VC>Ethylene. The linearity of $R^2$ for chlorinated solvents and these by-products was from 0.912 to 0.999 when analyte concentrations range from $10{\mu}g/L$ to $500{\mu}g/L$, respectively. The relative standard deviation (% RSD) were from 2.1% to 3.6% for concentration of $500{\mu}g/L$ (n=5), respectively. Finally, the limited of detection (LOD) observed in our study for chlorinated solvents and these by-products were from $0.5{\mu}g/L$ to $10{\mu}g/L$, respectively.