• 한국식품저장유통학회지
• /
• 제8권4호
• /
• pp.456-461
• /
• 2001

감 과피로부터 천연식용색소를 개발하고자 7가지 (acetone, ethanol, ether, ethyl acetate, ethylene chloride, hexan, methanol)의 유기용매로 carotenids를 추출하고 추출수율을 비교하였다. 이들 용매중 아세톤의 추출수율이 가장 크게 나타나 아세톤을 이용한 추출조건의 최적화를 위하여 중심합성계획에 의한 반응표면분석을 행하였다. 시료에 대한 추출온도(X$_1$), 추출시간(X$_2$), 용매비(X$_3$)를 요인변수로 하고 caroteniods 함량(Y)을 종속변수로 하여 5가지 수준으로 추출을 실시하였다. 반응표면분석으로 수립된 회귀식에 대하여 적합결여분석을 행한 결과 유의성이 없어 회귀식이 적절함을 알 수 있었으며 추출온도가 가장 큰 영향을 미치는 변수로 나타났다. carotenoids함량은 추출온도 $25^{\circ}C$부근까지 증가하다. 가 감소하는 것으로 나타났는데 이는 열에 의해 carotenoids의 산화가 촉진된 것으로 생각된다. 또한 carotenoids 함량은 추출시간과 용매비의 증가에 따라 carotenoids함량이 높게 나타났다. 기울기로 보아 추출온도가 추출시간보다 더 큰 영향을 주는 것을 알 수 있었다. 요인 변수 중 추출량에 가장 영향이 적은 용매비를 중심점의 조건으로 고정하고 추출온도와 추출시간만을 변수로 하였을 경우 carotenoids 함량을 최대로 하는 영역의 추출온도와 추출시간을 각각 29$^{\circ}C$, 93min으로 결정할 수 있었다.

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.14-23
• /
• 2018

The effect of dodecylbenzene sulfonic acid (DBSA) with different addition amount of DBSA ($M_{DBSA}$), temperatures and solvent-to-oil ratio (SOR, v/v) on asphaltene aggregation in a solvent deasphalting system was investigated. Increasing the $M_{DBSA}$ at SOR 10 and $55^{\circ}C$ caused the asphaltene removal ratio (ARR) to increase first, then maximize at 1 wt% of $M_{DBSA}$ and then decrease continuously. Based on the SARA (saturate, aromatic, resin, asphaltene) composition, the adsorption amount of DBSA on the asphaltene surface and the self-aggregation of the DBSA, the reason for the change in ARR with $M_{DBSA}$ was found due to the adsorption mechanism. In addition, the asphaltene-resin-DBSA colloidal size confirmed the change of adsorption behavior between the asphaltene and DBSA. Based on the results of this study, a hypothetical adsorption mechanism of DBSA on asphaltene aggregation in the solvent deasphalting system was conceived of and proposed.

• Journal of Pharmaceutical Investigation
• /
• 제37권1호
• /
• pp.1-5
• /
• 2007

Solid dispersions of piroxicam were prepared by melting method using poloxamer as a carrier. The results of DSC and XRD studies showed that the amorphous farm of piroxicam coexisted with the crystalline form in the solid dispersions. However, the ratio of crystalline form of piroxicam in the solid dispersion prepared by melting method decreased in comparison with the same ratio of the solid dispersion prepared by solvent method. As the ratio of poloxamer in the solid dispersion increased, the ratio of the amorphous form of piroxicam in the solid dispersion increased. The dissolution rate of piroxicam from the solid dispersions was significantly higher than that from piroxicam powder. In comparison to the solid dispersion prepared by solvent method, the dissolution rate of piroxicam from the solid dispersion prepared by melting method was higher. As the ratio of poloxamer in the solid dispersion prepared by melting method increased, the initial dissolution rate decreased, however, the total amount dissolved at the end of the study increased.

• 한국응용과학기술학회지
• /
• 제16권1호
• /
• pp.83-94
• /
• 1999

Glycoside fatty acid esters were synthesized by lipase-catalyzed glycosylation of fatty acids with methyl glycoside in solvent and solvent free process. Optimum condition of solvent process using 2-methyl-2-propanol were : moral ratio of methyl glycoside to fatty acid 1:3: initial concentration of methyl glycoside 50g/l:enzyme(immodilized lipase Novozym 435 from Candidia antarctica) content 1%(w/v) : desiccant content 9%(w/v); reaction temperature $60^{\circ}C$: reaction time 10hrs. The yield of 99% was obtained. Solvent-free process was carried out in total absence of solvent at $70^{\circ}C$ under reduced pressure, 5-20mmHg. To give meximum yield of 99% at the optimum condition of molar ratio of methyl glycoside to fatty acid 1:3, enzyme content 10%(w/w), and reaction time 10hrs. The glycosylation reactivity of different glycosylation agents were sequent to $Methyl-{\beta}-D-fructofuranoside$. $Methyl-{\beta}-D-glucopyranoside$. $Methyl-{\beta}-D-fructofuranosi$ de, and $Methyl-{\alpha}-D-glucopyranoside$.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.37-43
• /
• 1994

Commercial Poly(ethylene terephthalate) (PET) filaments were treated in solvents mixtures such as benzyl alcohol/perchloroethylene(BA/PER), benzyl alcohol/trichloroethylene(BA/TRI), benzyl alcohol/ethylene chloride(BA/EC), metha nol/perchloroethylene(ME/PER), and methanol/trichloroethyle(ME/TRI). Swelling of PET in solvent mixtures showed rapidly in the middle range of mixture ratio. Contribution of swelling of each component to total swelling of binary mixtures with increasing treated time was generally showed in proportion to the mixture ratio of the each component in dependence of the extend of swelling.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.490-493
• /
• 2003

Enzymatic synthesis of sugar fatty acid esters was investigated in organic solvent using Candida rugosa lipase. To overcome sugars insolubility in organic solvent, sugar absorption procedure was done on a silica gel. The product yield was determined by using ion Chromatography, with various factors such as reaction time, enzyme fatty acid molar ratio, number of carbon in fatty acid.

• KSBB Journal
• /
• 제6권3호
• /
• pp.281-288
• /
• 1991

This research was carried to investigate the effects of several organic solvents on the enzymatic transphosphatidylation in emulsion and two-phase solvent systems. The solvents having a similar dielectric constant with diethylether were effective for the enzyme activity. Diethylether and butylacetate were the most effective solvents, when added 12-15%(v/v) and 10-40%(v/v), respectively, for the synthesis of phosphatidylglycerol, phosphatidylethyleneglycol and phosphatidylpropyleneglycol. In the emulsion system, the size of ovolecithin liposome was increased and the clearness of the phospholipid bilayer was reduced as increasing the diethylether concentration. In the twophase solvent system, the rapidest reaction was obtained when water-organic solvent ratio was close to 1. The ratio of aqueous phase. however, should be lowered to 37% to gain the sole product of transphosphatidy1ation, without phosphatidohydrolysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1150-1153
• /
• 2006

In this paper, we investigated the effect of solvent on electrical properties of triisopropylsilyl (TIPS) pentacene organic thin-film transistors (OTFTs). The TIPS pentacene was spin coated by using chlorobenzene, p-xylene, chloroform and toluene as solvent. Fabricated OTFT with chlorobenzene showed field-effect mobility of $0.01\;cm^2/V{\cdot}s$, on/off ratio $4.3{\times}10^3$ and threshold voltage of 5.5 V. In contrast, with chloroform the mobility was $5.8{\times}10^{-7}\;cm^2/Vs$, on/off ratio $1.1{\times}10^2$ and threshold voltage of 1.7 V.

• 산업기술연구
• /
• 제23권A호
• /
• pp.187-191
• /
• 2003

A hollow-fiber type polysulfone UF membrane was surface-coated with hydroxyethylmethacrylate (HEMA). The effect of various coating parameters on permeation flux, such as concentration ratio of AIBN/HEMA, solvent(water or methanol), and UV irradiation time, was investigated. The water permeation flux of oil-emulsion increased with concentration ratio of AIBN/HEMA, and increased with UV irradiation time. The flux of the membrane coated in solution using methanol as a solvent was greater than that of the membrane coated in solution using water as a solvent. The flux of both the coated and the uncoated membrane declined with the operation. The flux decline means that the membrane fouling by oil-emulsion occurs. However, the fouling of the coated membrane was much less than that of the uncoated membrane.

• 한국재료학회지
• /
• 제22권2호
• /
• pp.78-81
• /
• 2012

$Y_2O_3$ nanomaterials have been widely used in transparent ceramics and luminescent devices. Recently, many studies have focused on controlling the size and morphology of $Y_2O_3$ in order to obtain better material performance. $Y_2O_3$ powders were prepared under a modified solvothermal condition involving precipitation from metal nitrates with aqueous ammonium hydroxide. The powders were obtained at temperatures at $250^{\circ}C$ after a 6h process. The properties of the $Y_2O_3$ powders were studied as a function of the solvent ratio. The synthesis of $Y_2O_3$ crystalline particles is possible under a modified solvothermal condition in a water/ethylene glycol solution. Solvothermal processing condition parameters including the pH, reaction temperature and solvent ratio, have significant effects on the formation, phase component, morphology and particle size of yttria powders. Ethylene glycol is a versatile, widely used, inexpensive, and safe capping organic molecule for uniform nanoparticles besides as a solvent. The characterization of the synthesized Y2O3 powders were studied by XRD, SEM (FE-SEM) and TG/DSC. An X-ray diffraction analysis of the synthesized powders indicated the formation of the $Y_2O_3$ cubic structure upon calcination. The average crystalline sizes and distribution of the synthesized $Y_2O_3$ powders was less than 2 um and broad, respectively. The synthesized particles were spherical and hexagonal in shape. The morphology of the synthesized powders changed with the water and ethylene glycol ratio. The average size and shape of the synthesized particles could be controlled by adjusting the solvent ratio.