• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.32 no.3
• /
• pp.13-22
• /
• 2019

Objectives : Armeniacae semen is the seed of Prunus armenica L. var. ansu MAXIM, and this is classified into Rosaceae. Armeniacae semen has been used for centuries in traditional oriental medicine for the treatment of pain and inflammatory diseases. Amygdalin is the major compound of Armeniacae semen, and it is now being used for the treatment of pain and cancer. Methods : In the present study, we compared the effects of an aqueous extract of Armeniacae semen and a solution of amygdalin extracted from Armeniacae semen on lipopolysaccharide(LPS)-stimulated prostaglandin E2 synthesis and nitric oxide production in mouse BV-2 microglial cells. For this study, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide(MTT) assay, reverse transcription-polymerase chain reaction(RT-PCR), prostaglandin E2 immunoassay and nitric oxide detection were performed on mouse BV-2 microglial cells. Results : In the present study, an aqueous extract of Armeniacae semen and an amygdalin solution extracted from Armeniacae semen suppressed prostaglandin E2 synthesis and nitric oxide production by inhibiting the LPS-induced enhancement of cyclooxygenase-2(COX-2) mRNA and the inducible nitric oxide synthase mRNA in mouse BV-2 cells. For the cyclooxygenase-1(COX-1) expression, an aqueous extract of Armeniacae semen showed a more potent suppression effect compared to the amygdalin solution. However, the amygdalin solution more potently suppressed the LPS-induced COX-2 mRNA expression compared to the aqueous extract of Armeniacae semen. Conclusions : As a result, aqueous extract of Armeniacae semen and amygdalin exert anti-inflammatory and analgesic effects.

• Journal of the Korean Ceramic Society
• /
• v.28 no.11
• /
• pp.885-891
• /
• 1991

Calcium hydroxyapatite have been synthesized by a direct precipitation reaction between 0.05 M calcium hydroxide suspension and 0.3 M orthophosphoric acid solution. 0.01 M calcium hydroxide solution was added during the reaction in order to increase the total Ca/P mol ration and reaction pH of the solution. The stoichiometric hydroxyapatite was synthesized over 1.75 as total Ca/P mol ratio, but the calcium-deficient hydroxyapatite was prepared under 1.725 as total Ca/P mol ratio. The nonstoichiometry of the precipitates were interpreted in terms of the pH change during the reaction.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.373-376
• /
• 2009

CdTe thin films for photovoltaic cell devices were deposited on the glass substrates by solution-based deposition methods, at low temperature processing conditions. In order to characterize physical, optical, and electronic properties of CdTe light absorbing polycrystalline material, a series of analysis was carried out in this study.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.45-51
• /
• 2017

Poly(urethane acrylate) siloxane oligomers with Interpenetrating polymer netwoked nanoparticles were prepared to synthesize hard coating solution by reaction with diisocyanates. The diisocyanate combined siloxane hard coating solution showed more flexibility than the siloxane solution. In addition, diisocyanate resulted in improvement of curl property and surface hardness in the siloxane solution. Of the used diisocyanates, isophorone diisocyanate and acryloyloxy ethyl diisocyanate were good for UV hard coating solution. This effect will decrease brittleness in the siloxane solution using for plastic display plate.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.329-332
• /
• 2001

It has been known that, in enzymatic synthesis of cephalexin, the conversion yield was reduced by high loading of ampicillin acylase. In order to elucidate this phenomena, pH-controlled synthesis of cephalexin was examined using a purified Acetobacter turbidans acylase. When the pH of the reaction mixture was maintained at $6.20{\pm}0.04$, the reduction of the maximal conversion rate was not observed even with high enzyme loading. The kinetic parameters also suggest that pH drop during the enzymatic synthesis of cephalexin was mainly attributed to the rapid hydrolysis of D-${\alpha}$-phenylglycine methyl ester to D-${\alpha}$-phenylglycine, rather than the disappearance of 7-amino-3-deacetoxycephalosporanic acid for cephalexin synthesis. At higher molar ratio of two substrates, [D-${\alpha}$-phenylglycine methyl ester]/[7-amino-3-deacetoxycephalosporanic acid], the conversion rate was also elevated under pH-controlled enzymatic synthesis, which implies that the main reason for the pH drop is due to the production of D-${\alpha}$-phenylglycine methyl easter, the effect of a water-methanol cosolvent system on the ester, the effect of a water-methanol cosolvent system on the conversion profile was also examined. Even the though the conversion rate was increased in 10% methanol solution, a higher than 16% methanol in the reaction mixture caused an inactivation of enzyme.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.133-141
• /
• 2019

High specific surface area zirconia with acid-basic property was synthesized by precipitation using reflux method or hydrothermal synthesis method using ammonium hydroxide solution as precipitant in the range of pH of Zr solution from 2 to 10. The prepared zirconia was characterized by the nitrogen adsorption, X-ray diffraction (XRD), isopropanol temperature programmed desorption (IPA-TPD), scanning electron microscopy and X-ray photoelectron spectroscopy, and the catalytic activity in the IPA decomposition reaction was correlated with the acid-basic properties. When using reflux method, high pH of Zr solution was required to obtain high fraction of tetragonal zirconia, and pure tetragonal zirconia was possible at pH 9 or higher. High pH was required to obtain high specific surface area zirconia, and the hydrous zirconia synthesized at pH 10 had high specific surface area zirconia of $260m^2g^{-1}$ even after calcination at $600^{\circ}C$. However, hydrothermal synthesis with high pressure under the same conditions resulted in very low specific surface area below $40m^2g^{-1}$ and monoclinic phase zirconia was synthesized. High pH of the solution was required to obtain high specific surface area tetragonal phase zirconia. In hydrothermal synthesis requiring high pressure, monoclinic zirconia was produced irrespective of the pH of the solution, and the specific surface area was relatively low. Zirconia with high specific surface area and tetragonal phase was predominantly acidic compared to basicity and only propylene, which was observed as selective dehydration reaction in IPA decomposition reaction, was produced.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1252-1256
• /
• 2010

A polyvinylpyrrolidone (PVP)/Ag nanocomposites was prepared by the simultaneous thermal reduction and radical polymerization route. The in situ synthesis of the Ag/PVP nanocomposites is based on the finding that the silver n-propylcarbamate (Ag-PCB) complex can be directly dissolved in the NVP monomer, and decomposed by only heat treatment in the range of 110 to $130^{\circ}C$ to form silver metal. Silver nanoparticles with a narrow size distribution (5 - 40 nm) were obtained, which were well dispersed in the PVP matrix. A successful synthesis of Ag/PVP nanocomposites then proceeded upon heat treatment as low as $110^{\circ}C$. Moreover, important advantages of the in situ synthesis of Ag/PVP composites include that no additives (e.g. solvent, surface-active agent, or reductant of metallic ions) are used, and that the stable silver nanocolloid solution can be directly prepared in high concentration simply by dissolving the Ag/PVP nanocomposites in water or organic solvent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.732-734
• /
• 2003

A solvothermal synthetic method to $BaTiO_3$ nanoparticle has been investigated in toluene solution with $BaTi(OR)_6$ as precursor. A precursor prepared from barium metal with toluene, isopropanol and titanium isopropoxide was used as a starting material. Weight ratio of precursor to solvent prepared in the mixture are 5/100, 10/100, 20/100 and 50/100wt%. At the weight ratio of 50/100wt%, $BaTiO_3$ butterfly twin crystalline(${\fallingdotseq}100nm$) was obtained after synthesis at $250^{\circ}C$ for 20hrs in an autoclave. X-ray diffraction and transmission electron microscopy showed that the product of 50/100wt% has crystallization. At 5/100, 10/100, and 20/100wt%, however, red colloidal solution was obtained after synthesis and crystalline phase of $BaTiO_3$ was not produced.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.324-330
• /
• 1990

In this study, in order to perform dynamic design of machine tools reasonably and effectively, a method was formulated to be applicable to the damped structures connected by joints having elasticity and damping by using substructure synthesis method. And a nonlinear solution method was proposed and it formulates the nonlinear parts by describing functions and uses the reducing transformation matrix by the substructure synthesis method. The results of frequency response analysis of a machine tool, where an NC lathe was partitioned by three parts of spindle, housing and bed-base part and the nonlinearity of bearing parts between spindle and housing was modelled, showed force dependency of the response.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2459-2466
• /
• 2010

Unfunctionalized biaryl compounds were parallelly and combinatorially prepared by the traceless hydrogenolysis of biarylsulfonates supported on pentaerythritol. The hydrogenolysis using 2-propylmagnesium chloride in the presence of $dppfNiCl_2$ efficiently generated corresponding biaryl derivatives without any memory of the support. The strategy using pentaerythritol as a small soluble support was disclosed to have a potential to combine the benefits of both SPOS and solution-phase reaction with fast reaction rate, facile isolation of intermediates, easy analysis of intermediates and atom economical manner. The novel tetrapodal support is expected to be an efficient substitute for polymeric supports in many circumstances.