• Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.174-180
• /
• 2005

Nano-sized iron was synthesized using borohydride reduction of $Fe^{3+}$ in aqueous solution. A wide range of synthesis conditions including varying concentrations of reagents, reagent feeding rate, and solution pH was applied in an aqueous system under anaerobic condition. The reactivity of nano-sized iron from each synthesis was evaluated by reacting the iron with TCE in batch systems. Evidence obtained from this study suggest the reactivity of iron is strongly dependent on the synthesis solution pH. The iron reactivity increased as solution pH decreased. More rapid TCE reduction was observed for iron samples synthesized from higher initial $Fe^{3+}$ concentration, which resulted in lower solution pH during the synthesis reaction. Faster feeding of $BH_4^-$ solution to the $Fe^{3+}$ solution resulted in lower synthesis solution pH and the resultant iron samples gave higher TCE reduction rate. Lowering the pH of the solution after completion of the synthesis reaction significantly increased reactivity of iron. It is presumed that the increase in the reactivity of iron synthesized at lower pH is due to less precipitation of iron (hydr)oxides or less surface passivation of iron.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.250-257
• /
• 2000

The feasibility of synthesizing SiC-AlN solid solution by field-activated combustion synthesis was demonstrated. At lower fields of 8-16.5V/cm, composites of AlN-rich and SiC-rich phases were synthesized, but at fields of 25-30 V/cm, the product was a 2H structure solid solution. Combustion synthesis of the solid solution by nitridation of aluminum with silicon carbide under a nitrogen gas pressure of 4-8 MPa was also investigated. The maximum combustion temperature and wave propagation velocity were found to be influenced by the electric field in the field-activated combustion synthesis, and by the green density and nitrogen pressure in the combustion nitridation. In both cases the formation of solid solutions is complete within seconds, considerably faster than in conventional methods which require hours.

• Applied Science and Convergence Technology
• /
• v.26 no.6
• /
• pp.164-173
• /
• 2017

Across the most industry, the demand for nanoparticles is increasing. Therefore, many studies have been carried out to synthesize nanoparticles using various methods. The aim of this paper is to introduce an industry-applicable as well as financially and environmentally effective solution plasma process. The solution plasma process involves fewer chemicals than the traditional kit, and can be used to replace many of the chemical agents employed in previous synthesis of nanoparticles into plasma. In this study, this process is compared to the wet-reaction process that has thus far been widely used in the most industry. Furthermore, the solution plasma process has been classified into four different types (in-solution, out of solution, direct type, and remote type), according to its plasma occurrence position and plasma types. Thus, the source of radicals, nanoparticle synthesis, and modification methods are explained for each design. Lastly, unlike nanoparticles with hydrophilic functional groups that are made inside the solution, a nanoparticle synthesis and modification method to create a hydrophobic functional group is also proposed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.242-243
• /
• 2005

In this study, (La,Sr)$MnO_{3+\delta}$ powder used cathode material for SOFC was synthesized with precursor by GNP and the properties of powder, crystal phase, electric properties and deoxidization properties with precursor were investigated. The synthesis powder was prepared when oxidant/fuel mole and pH were 1 and 1, respectively and the synthesis powder was synthesized by GNP method using nitrate solution or oxide solution as precursor. Deoxidization peak of the nitrate solution was appeared lower temperature than the oxide solution, at $450^{\circ}C$. In this result, synthesis (La,Sr)$MnO_{3+\delta}$ powder using nitrate solution with Mn excess was suitable cathode material for SOFC due to had higher deoxidization properties. Also synthesis (La,Sr)$MnO_{3+\delta}$ powder according to precursor had difference electrical conductivity according to influence sintering density and crystal phase with precursor. Specially, the synthesis method and starting material had effect on deoxidization properties for SOFC.

• Korean Journal of Materials Research
• /
• v.33 no.10
• /
• pp.385-392
• /
• 2023

A solution combustion process for the synthesis of hollandite (BaAl₂Ti₆O₁₆) powders is described. SYNROC (synthetic rock) consists of four main titanate phases: perovskite, zirconolite, hollandite and rutile. Hollandite is one of the crystalline host matrices used for the disposal of high-level radioactive wastes because it immobilizes Sr and Lns elements by forming solid solutions. The solution combustion synthesis, which is a self-sustaining oxi-reduction reaction between a nitrate and organic fuel, generates an exothermic reaction and that heat converts the precursors into their corresponding oxide products in air. The process has high energy efficiency, fast heating rates, short reaction times, and high compositional homogeneity. To confirm the combustion synthesis reaction, FT-IR analysis was conducted using glycine with a carboxyl group and an amine as fuel to observe its bonding with metal element in the nitrate. TG-DTA, X-ray diffraction analysis, SEM and EDS were performed to confirm the formed phases and morphology. Powders with an uncontrolled shape were obtained through a general oxide-route process, confirming hollandite powders with micro-sized soft agglomerates consisting of nano-sized primary particles can be prepared using these methods.

• Archives of Pharmacal Research
• /
• v.21 no.3
• /
• pp.330-337
• /
• 1998

N-(tert-Butoxycarbonyl)-O-(dimethythiophosphono)-L-tyrosine (6) and N-(tert-butoxycarbonyl)-O-(dicyanoethylthiophosphono)-L-tyrosine (15) were prepared as intermediates for the synthesis of thiophosphotyrosine-containing peptides. The reactivity and suitability of two compounds for the solid phase or solution phase peptide synthesis utilizing t-Boc chemistry were examined.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.6
• /
• pp.481-485
• /
• 2012

ZnO nanowires were synthesized by hydrothermal technique. Prepared synthesis aqueous solutions were preserved by preheating in autoclave type synthesis equipment with various preheating time of 1 h difference. ITO-coated corning glass substrates deposited with AZO seed layers were then inserted in the preheated synthesis aqueous solutions and ZnO nanowires were grown for 180 min at $90^{\circ}C$. Density, length and aspect ratio of the grown ZnO nanowires were investigated. Composition, structural and optical properties of the grown ZnO nanowires were analyzed. Characteristics of the ZnO nanowires were comparatively studied in relation with $Zn^{2+}$ ion concentration measured directly after the preheating of synthesis aqueous solution.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.3
• /
• pp.216-218
• /
• 2016

In this study, we used not chemical and physical synthesis method but the solution plasma sputtering method in the synthesis of silver nano-particles. Synthesis of all the silver nano-particles was conducted for 1hour in 360 ml of distilled water and characteristics of changing the input voltage and frequency of the synthesised silver nano-particles by using the solution plasma sputtering method were analyzed through FE-SEM(Field Emission-Scanning Electron Microscope). We changed the input voltage from 8 kV to 10 kV in steps of 1 kV, input frequency from 20 kHz to 30 kHz in steps of 5 kHz in the solution plasma reactor with the advanced device which can control the DC voltage and frequency. We confirmed that the size of silver nano-particles were larger according to the change of the input voltage and frequency.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.8
• /
• pp.875-878
• /
• 1999

A new concept ？？soft solution processing？？ has been introduced to fabricate advanced solid state materials in an economical, environmentally friendly, and energy and material efficient way. The prepared films show the desired and prospective properties despite of low temperature synthesis and no post-synthesis annealing. Successful examples demonstrate that soft solution processing is capable of preparing advanced materials with planned properties through the easy control of reaction conditions in a suitable aqueous solution in a single synthetic step without huge energy consumption and without any sophisticated equipment.

• Biomolecules & Therapeutics
• /
• v.13 no.3
• /
• pp.181-184
• /
• 2005

The solution-phase combinatorial synthesis of iminodiacetic acid triamide libraries linked to 1-(4-chlorobenzhydryl)piperazine has been reported. Ten mixture libraries, each containing 5 components, were synthesized in 4 steps from N-BOC-iminodiacetic acid anhydride. Antibradykinin effects of the mixture and individual libraries were compared using guinea-pig ileum smooth muscle. The changes in the inhibition were also observed by testing the combination of two different compounds from the same library. We found out the correlation between the inhibition of mixtures and that of individual libraries. It is possible to choose the mixtures with relatively high inhibitory effects to find out the most effective individual compound for further synthesis.