• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.6
• /
• pp.862-868
• /
• 2005

Korean mountain ginseng roots were freeze-dried at $-70^{\circ}C$ and extracted by different extracting solution conditions to investigate chemical compositions of extracts. The soluble solid content of the extract from $7.04\~13.45\%\;and\;50\%$ EtOH and MeOH extracts were higher than those of other extracts. $100\%\;water\;and\;90\%$ EtOH extracts gave the highest Brix with $19.98\%$\;and\;19.65\%$, respectively. pH of the extracts were ranged from $5.82\~6.60$. Browning color at 470 nm of the extract were high value in 50$\%$ EtOH extract. In case of Hunter's color value, L value of extract was higher in $100\%$ water extract (21.28) than EtOH extract $(17.18\~21.02)$, a and b values of extract were the highest in $100\%$ water (-0.12) and $90\%$ MeOH extract (1.34). The contents of free sugars in the EtOH extract were increased with the ethanol concentration. Sucrose contents of $90\%$ EtOH and MeOH extracts were 6,159 mg/100 g and 5,238 mg/100 g. Major organic acids of the extract were citric and malic acids. Major free amino acids of the extract were L-arginine, L-proline, $\gamma$ -amino-n-butyric acid, alanine and aspartic acid. The highest ginsenoside content was shown to be about $10.50\%\;in\;90\%$ MeOH extract. Major minerals of extract were P, K, Na, Mg and Ca.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.395-408
• /
• 2011

The study which it sees exclusions the copper and the zinc which contain in pig sludge, It study pig sludge resources fertilizer production which are rational, pig sludge resources fertilizers after seeding, silage corn it investigates growth characteristics and forage value, the result which investigates pig sludge resources fertilizers effectiveness with afterwards is same. With fertilizer ingredients in pig sludge chemical qualities, the content of the nitrogen and the phosphoric acid comes 4.4% to be 6.29%, pH 7.02 and content of the copper and the zinc which is a heavy metal which contains in pig sludge with 805 mg/kg and 1,704 mg/kg, it is a restrictive standard of the fertilizer, 300 mg/kg and 900 mg/kg it sees to be high, it manufactures citric acid 1 hydrate with the organic acid solution, heavy metals of pig sludge where it is a mixture ratio of the organic acid solution, it divides to 25%, 50%, 75% and 100% 4 kind levels, the result which measures the heavy metal exclusion ratio of the copper and the zinc, the mixture ratio of the organic acid solution to be many exclusion ratio of the copper and the zinc is showing a just interrelation, from organic acid solution 100% level content of pig sludge remains copper and zinc 330.03 mg/kg and 41.28 mg/kg, it shows the exclusion ratio of copper 59% zinc 97%. 'Cheonganok' growth characteristics with citric acid 1 hydrate, Treatment 2 and control growth characteristics etc, it exclusion the copper and the zinc it doesn't appear on significant difference statistically but, treatment 3 after only pig sludge in resources disposal where it seeding, growth characteristics of leaf area etc. is badness, it compares in control and treatment 2 the growth characteristics badness, it is appearing, it is caused by with disease and insects occurrence of $Ostrinia$ $furnacalis$ and brown spot, the damage was many. From forage value, Treatment 2 where it exclusion the heavy metal with the citric acid 1 hydrate with control it compares and there are not significant difference from crude protein and ADF and NDF contents etc., seeding only Pig Sludge in resources disposal treatment 3, it is caused by with $Ostrinia$ $furnacalis$ etc., trunk and aging of the leaf to be high ADF content is low. but from crude protein, the nitrogen ingredient which pig sludge has and interrelation it seemed and high numerical value were confirmed.

• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.303-309
• /
• 2014

The development of Japanese geoduck, Panopea japonica, grown under culture conditions, has been examined through the morphological characteristics in fertilized egg, larvae and juvenile. Gametes were stripped from ripe broodstock and placed into two separate containers. Eggs were washed through a $40{\mu}m$ sieve and fertilized with dilute sperm solution. Developing larvae were maintained at $19{\pm}1^{\circ}C$. Fertilized eggs with $81.6{\mu}m$ diameter developed to trochophores within 14 h and to D-stage larvae ($116{\mu}m$ shell length) within 27 h. Larvae were spontaneously settled at shell length of $311{\mu}m$ after 20 days. The hatching from fertilized eggs and larval rearing were normally available in $18.5-21.5^{\circ}C$, and the growth was good in a cashmilon substrate, as well as sand. After rearing of day 108 from metamorphosis, the shell length of juvenile P. japonica reached 13 mm, and growth rate of shell length of the juvenile was $117.5{\mu}m/d$.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.6
• /
• pp.405-411
• /
• 2006

Epinastine is an antiallergic drug effective for bronchial asthma, allergic rhinitis, urticaria and dermatitis. Epinastine is topically active, direct H1-receptor antagonist and an inhibitor of the release of histamine from the mast cell. The purpose of the present study was to evaluate the bioequivalence of two epinastine hydrochloride tablets, Alesion Tablet (Boehringer Ingelheim Korea Ltd.) and S-napine tablet 10 mg(Sam Chun Dang Pharm. Co., Ltd), according to the guidelines of the Korea Food and Drug Administration(KFDA). The release of epinastine from the two epinastine formulations in vitro was tested using KP VIII Apparatus II method with various dissolution media(pH 1.2, 4.0, 6.8 buffer solution and water). Twenty six healthy male subjects, $23.35{\pm}1.57$ years in age and $66.29{\pm}10.61kg$ in body weight, were divided into two groups and a randomized $2{\times}2$ cross-over study was employed. After two tablets containing 20 mg as epinastine hydrochloride was orally administered, blood was taken at predetermined time intervals and the concentrations of epinastine in serum were determined using HPLC with UV detector. The dissolution profiles of two formulations were similar at all dissolution media. In addition, the pharmacokinetic parameters such as $AUC_t,\;C_{max}\;and\;T_{max}$ were calculated and ANOVA test was utilized for the statistical analysis of the parameters using logarithmically transformed $AUC_t.\;C_{max}$ and untransformed $T_{max}$. The results showed that the differences between two formulations based on the reference drug, Alesion tablet, were 1.50, 1.46 and -13.48% for $AUC_t,\;C_{max}\;and\;T_{max}$, respectively. There were no sequence effects between two formulations in these parameters. The 90% confidence intervals using logarithmically transformed data were within the acceptance range of log 0.8 to log 1.25(e.g., log 0.95$\sim$log 1.12 and log 0.93$\sim$log 1.10 for $AUC_t\;and\;C_{max}$, respectively). Thus, the criteria of the KFDA bioequivalence guideline were satisfied, indicating S-napine tablet 10 mg was bioequivalent to Alesion tablet.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.7-8
• /
• 2011

Basically, the lattice mismatch between film and substrate can make those BiFeO3(BFO) films distorted with strain structure. BFO phase can be stabilized on LaAlO3(LAO) represents the example of a multiferroic with giant axial ratio. Its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion and related to the rotation of the oxygen octahedra. In this study, we show that phases with a tetragonal-like epitaxial BFO films can indeed be ferroelectric and also can be stabilized via epitaxial growth onto LAO. Recent reports on epitaxial BFO films show that the crystal structure changes from nearly rhombohedral ("R-like") to nearly tetragonal("T-like") at strains exceeding approximately -4.5%, with the "T-like" structure being characterized by a highly enhanced c/a ratio. While both the "R-like" and the "T-like" phases are monoclinic, our detailed x-ray diffraction results reveal asymmetry change from MA and MC type, respectively. By applying additional strain or by modifying the unit cell volume of the film by substituting Ba for Bi, the monoclinic distortion in the "T-like" MC phase is reduced, i.e. the system approaches a true tetragonal symmetry. There are two different M-H loops for $Bi_{1-x}Ba_xFeO_{3-{\delta}}$(BBFO) and BFO films on SrTiO3(STO) & LAO substrates. Along with the ferroelectric characterization, these magnetic data indicate that the BFO phase stabilized on LAO represents the first example of a multiferroic with giant axial ratio. However, there is a significant difference between this phase and other predicted ferroelectrics with a giant axial ratio: its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion. Therefore, in going from bulk to highly-strained films, a phase sequence of rhombohedral(R)-to-monoclinic ["R-like" MA-to-monoclinic, "T-like" MC-to-tetragonal (T)] is observed. This sequence is otherwise seen only near morphotropic phase boundaries in lead-based solid-solution perovskites (i.e. near a compositionally induced phase instability), where it can be controlled by electric field, temperature, or composition. Our results show that this evolution can occur in a lead-free, stoichiometric material and can be induced by stress alone. Those major results are summarized as follows ; 1) Ba-doping increases the unit cell volume, 2) BBFO on LAO can be fully strained up to x=0.08 as a strain limit (Fig. 1), 3) P(E) & M(H) properties can be tuned by the variation of composition, strain, and film thickness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.454-454
• /
• 2014

Silicon microwire array is one of the promising platforms as a means for developing highly efficient solar cells thanks to the enhanced light trapping efficiency. Among the various fabrication methods of microstructures, deep reactive ion etching (DRIE) process has been extensively used in fabrication of high aspect ratio microwire arrays. In this presentation, we show precisely controlled Si microwire arrays by tuning the DRIE process conditions. A periodic microdisk arrays were patterned on 4-inch Si wafer (p-type, $1{\sim}10{\Omega}cm$) using photolithography. After developing the pattern, 150-nm-thick Al was deposited and lifted-off to leave Al microdisk arrays on the starting Si wafer. Periodic Al microdisk arrays (diameter of $2{\mu}m$ and periodic distance of $2{\mu}m$) were used as an etch mask. A DRIE process (Tegal 200) is used for anisotropic deep silicon etching at room temperature. During the process, $SF_6$ and $C_4F_8$ gases were used for the etching and surface passivation, respectively. The length and shape of microwire arrays were controlled by etching time and $SF_6/C_4F_8$ ratio. By adjusting $SF_6/C_4F_8$ gas ratio, the shape of Si microwire can be controlled, resulting in the formation of tapered or vertical microwires. After DRIE process, the residual polymer and etching damage on the surface of the microwires were removed using piranha solution ($H_2SO_4:H_2O_2=4:1$) followed by thermal oxidation ($900^{\circ}C$, 40 min). The oxide layer formed through the thermal oxidation was etched by diluted hydrofluoric acid (1 wt% HF). The surface morphology of a Si microwire arrays was characterized by field-emission scanning electron microscopy (FE-SEM, Hitachi S-4800). Optical reflection measurements were performed over 300~1100 nm wavelengths using a UV-Vis/NIR spectrophotometer (Cary 5000, Agilent) in which a 60 mm integrating sphere (Labsphere) is equipped to account for total light (diffuse and specular) reflected from the samples. The total reflection by the microwire arrays sample was reduced from 20 % to 10 % of the incident light over the visible region when the length of the microwire was increased from $10{\mu}m$ to $30{\mu}m$.

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.661-668
• /
• 2010

Cu(In,Ga)$Se_2$(CIGS) photovoltaic thin films were electrodeposited on Mo/glass substrates with an aqueous solution containing 2 mM $CuCl_2$, 8 mM $InCl_3$, 20 mM $GaCl_3$ and 8mM $H_2SeO_3$ at the electrodeposition potential of -0.6 to -1.0 V(SCE) and pH of 1.8. The best chemical composition of $Cu_{1.05}In_{0.8}Ga_{0.13}Se_2$ was found to be achieved at -0.7 V(SCE). The precursor Cu-In-Ga-Se films were annealed for crystallization to chalcopyrite structure at temperatures of 100-$500^{\circ}C$ under Ar gas atmosphere. The chemical compositions, microstructures, surface morphologies, and crystallographic structures of the annealed films were analyzed by EPMA, FE-SEM, AFM, and XRD, respectively. The precursor Cu-In-Ga-Se grains were grown sparsely on the Mo-back contact and also had very rough surfaces. However, after annealing treatment beginning at $200^{\circ}C$, the empty spaces between grains were removed and the grains showed well developed columnar shapes with smooth surfaces. The precursor Cu-In-Ga-Se films were also annealed at the temperature of $500^{\circ}C$ for 60 min under Se gas atmosphere to suppress the Se volatilization. The Se amount on the CIGS film after selenization annealing increased above the Se amount of the electrodeposited state and the $MoSe_2$ phase occurred, resulting from the diffusion of Se through the CIGS film and interaction with Mo back electrode. However, the selenization-annealed films showed higher crystallinity values than did the films annealed under Ar atmosphere with a chemical composition closer to that of the electrodeposited state.

• Journal of Life Science
• /
• v.17 no.2 s.82
• /
• pp.266-271
• /
• 2007

Bisphenol A (BPA) has been widely used as a monomer for production of epoxy resins and polycarbonate plastics. The annual production of BPA exceeds 640,000 metric tons in worldwide. BPA, a suspected phenolic endocrine disrupter, is moderately soluble and frequently detected in industrial wastewater. To date, HPLC and GC has been used for BPA analysis. However, HPLC and GC-analysis need high operation lost, experts, and an elaborate pre-treatment of samples, and is difficult to apply on-time and mass analysis. Therefore, simple, mass and rapid detection of BPA in environments is necessary. In the present study, spectrophotometric method of BPA quantification was developed. Based on blue-color product formation with BPA and ferric chloride/ferricyanide under the optimized conditions, the standard curve was acquired $({\lambda}_{750}=0.061\;BPA\;[{\mu}M]+0.07155,\;R^2=0.992)$. Using an established method, the BPA contents in the soil extract, and different water samples and living products, including disposable syringe, cup and plastic tube, were analyzed. The results suggested that the method is useful for BPA determination from different massive samples. Since the BPA metabolites, nontoxic 4-hydroxyacetophenone or 4-hydroxybenzaldehyde, did not form blue-color product, this method is also useful to screen a microorganism for BPA bioremediation.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.704-709
• /
• 2002

To improve the mechanical properties of $Al_2$O$_3$/ZrO$_2$composites, the homogeneous dispersion of ultra low size ZrO$_2$ particles in $Al_2$O$_3$ceramics have been controlled by coprecipitation method. In case of mechanical mixing of ZrO$_2$ powders with $Al_2$O$_3$, homogeneous dispersion and controlling the ZrO$_2$ size were relatively difficult due to high sintering temperature. So nanosized Zr hydroxide was coprecipitated from ZrOCl$_2$/Y(NO$_3$)$_3$ solution with commercial sub-micron sized $\alpha$-alumina (Sumitomo : AES-11(0.4 ${\mu}{\textrm}{m}$)) and high purity ultra low sized $\alpha$-alumina (Taimei Chemical (0.22 ${\mu}{\textrm}{m}$)) for low temperature sintering. By this partial coprecipitation method, relatively low sized ZrO$_2$ dispersion in $Al_2$O$_3$/ZrO$_2$ composites was achieved at 150$0^{\circ}C$-1$600^{\circ}C$ of sintering temperature range and their mechanical properties were measured.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.1
• /
• pp.71-83
• /
• 2001

The purpose of this study was to compare the effects of various surface treatments by measuring removal torque on bone healing around titanium implants. 40 Screw-shaped cp titanium implants with length of 4mm, outer diameter of 3.75mm, and pitch-height of 0.5mm were used Group 1 was left as machined(control), Group 2 was blasted with $50{\mu}m\;Al_2O_3$, group 3 was blasted and etched in etching solution($NH_4OH : H_2O_2:H_2O= 1 : 1 : 5$) at $90^{\circ}C$ for 1 minute group 4 was blasted and oxidated under pure oxygen at $800^{\circ}C$. The implant surface roughness was analyzed with SEM and CLSM(Confocal Laser Scanning Microscope) and implants were placed in proximal tibial metaphysis of 10 New Zealand White rabbits. After 3 months of healing period, removal torque of each implant was measured to compare bone healing around implant. The results obtained were as follows 1. In SEM view, blasting increased the roughness of the surface, but etching of that rough surface decreased the roughness due to the removal of the tip of the peak. Oxidation also decreased the roughness due to formation of needle-like oxide grains on the implant surface. 2. The Sa value from CLSM was least in the machined group($0.47{\mu}m$), greatest in blasted group($1.25{\mu}m$), and the value decreased after etching($0.91{\mu}m$) and oxidation($0.94{\mu}m$). 3. The removal torque of etched group(24.5Ncm) was greater than that of machined group(16.7Ncm) (P<0.05), and was greatest in the oxidated group(40.3Ncm) and the blasted group(34.7Ncm).