• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.672-677
• /
• 2009

To reduce the dependence of wool dyeing on the temperature several solvents with different properties and structures were added to the dye bath of C. I. Acid Yellow 42. Nearly the same total solubility parameters(${\delta}_t$) of solvents as those of wool fiber and hydrophobic part of the dyestuff were needed to increase disaggregation of dye molecules, loosening the wool fiber and wickabilty of dyeing solution; besides, the large surface tension(${\gamma}$) value of the solvents and the well balanced values of the three-component Hansen solubility parameters such as dispersion(${\delta}_d$), polar(${\delta}_p$), and hydrogen(${\delta}_h$) bonding parameters were required. Among the added solvents dimethyl phthalate(DMP) and acetophenone(AP) were satisfied with these conditions and worked the most successfully in the low temperature wool dyeing. Their effectiveness proven by the dyeing rate and the activation energy ($E_a$) of the dyeing was in the order of DMP > AP > DBE > CH > M >NONE. In conclusion the total solubility parameters(${\delta}_t$), the three-component Hansen parameters and the surface tension(${\gamma}$) of DMP and AP could be the guidelines to select suitable solvents for low temperature wool dyeing.

• 멤브레인
• /
• 제28권5호
• /
• pp.320-325
• /
• 2018

FASs (fluoroalkylsilanes)로 표면 개질한 소수성 막에 대한 부탄올/물, 이소프로판올/물 용액의 수착(sorption)량을 측정하였으며 이들 수착 특성을 Hansen 용해도 파라미터를 이용하여 해석하였다. 부탄올의 수착량이 이소프토판올보다 많았으며, 이는 부탄올의 용해도 파라미터(${\delta}_t=20.4$)와 FASs 소수성 막의 용해도 파라미터(${\delta}_t=16.9$)와의 차이가 이소프로판올 (${\delta}_t=24.6$)과의 차이보다 작기 때문인 것으로 설명할 수 있다. 극성력(${\delta}_p$) 측면에서 살펴보면, FASs 극성력(${\delta}_p=4.6$)과 부탄올의 극성력(${\delta}_p=6.3$)과의 차이가 FASs 극성력(${\delta}_p=4.6$)과 이소프로판올의 극성력(${\delta}_p=9.0$)과의 차이보다 작다. 이는 부탄올-FASs 간의 극성력 차이가 이소프로판올-FASs 간의 극성력 차이보다 작아서 부탄올-FASs 간의 상호인력이 크다는 것을 의미하며, 수착량이 크게 나타나는 결과를 설명할 수 있다. 본 실험결과로부터 막에 대한 알코올의 수착특성, 용매에 대한 용질의 용해도 등을 분석하는데 용해도 파라미터를 이용할 수 있음을 알 수 있다.

• Journal of Pharmaceutical Investigation
• /
• 제19권1호
• /
• pp.21-27
• /
• 1989

Kinetic and thermodynamic aspects of the interface transfer of cefoperazone and its pivaloyloxymethyl ester were studied in a two-phase system composed of aqueous buffers and n-octanol by using the absolute reaction rate theory. In terms of the net thermodynamic parameters for the process, ${\Delta}S$ increased and ${\Delta}F$ decreased as the lipophilicity increased. With the increased ratio of forward $(k_f)$ to backward rate constants $(k_b)$, the ester was more lipophilic than cefoperazone, but the aqueous solubility was reduced.

• Bulletin of the Korean Chemical Society
• /
• 제10권1호
• /
• pp.34-39
• /
• 1989

The relationship between the solute retention and physical parameters describing the interaction between the solute and mobile phase was investigated to predict the solute retention easily in RPLC. The retention data of monosubstituted benzenes were measured on the $\mu$-Bondapak C18 and phenyl columns with methanol-water systems. The linear relationship between dielectric increment($\epdilon'$) and retention data was observed. When the solute form hydrogen bonding with solvent molecules, the slope of the ln k' vs. $\epdilon'$ plot is changed as the compositions is varied. The quadric relationship between mixed solvent solubility parameter ($\delta$M) and retention data was observed.

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.167-174
• /
• 2003

Thermoplastic vulcanizates (TPV) or dynamic vulcanizates are thermoplastic elastomers produced by simultaneous mixing and crosslinking of a rubber and a thermoplastic. The objective of the present work is to investigate the effects of different types of peroxides as curing agents on the properties of PP/EPDM TPVs. The mechanical properties change significantly with the chemical nature of the peroxides and the extent of crosslinking at a fixed PP/EPDM blend ratio. The tensile strength of the TPVs obtained with the various peroxides can be related to the solubility parameters of the polymers and of the peroxides. The Young's modulus of the peroxide-cured TPVs can be correlated with the delta torque values of equivalent thermoset EPDM vulcanizates, corresponding to the crosslinking efficiencies of the peroxides.

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.149-153
• /
• 2006

An attempting to produce a p-type diluted magnetic semiconductor (DMS) using $Ti_{1-x}Co_xO_{2-\delta}-based$ thin films was made by suitable control of the deposition parameters including deposition temperature, deposition pressure, and doping level using a pulsed laser deposition method. T$Ti_{0.97}Co_{0.03}O_{2-\delta}-based$ (TCO) films deposited at $500^{\circ}C$ at a pressure of $5\times10^{-6}$ Torr showed an anomalous Hall effect with p-type characteristics. On the other hand, films deposited at $700^{\circ}C$ at $5\times10^{-6}$ Torr showed n-type behaviors by a decreased solubility of cobalt. The charge carrier concentration in the p-type TCO films was approximately $7.9\times10^{22}/cm^3$ at 300 K and the anomalous Hall effect in the p-type TCO films was controlled by a side-jump scattering mechanism. The magnetoresistance (MR), measured at 5 K in p-type TCO films showed a positive behavior in an applied magnetic field and the MR ratio was approximately 3.5 %. The successful preparation of p-type DMS using the TCO films has the potential for use in magnetic tunneling junction devices.