• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.86-91
• /
• 1987

Changes in the contents of sugars and soluble solids and flavor rate of cooked kernels of three sweet com hybrids (Great Bell, Danok 1, and Golden Cross Bantam) and a super sweet corn hybrid (Crisp Super Sweet 720) were observed from 15 days after silking (DAS) to 27 or 33 DAS in 1985 and 1986 to determine the optimum harvest time. Sucrose content in all hybrids and fructose and glucose contents of Crisp Super Sweet 720 increased from 15 DAS to 21 or 24 DAS and then decreased. However, in the three sweet corn hybrids both fructose and glucose contents were highest at 15 DAS and then continuously decreased with maturity. At harvest time the major sugar component was sucrose and the highest total sugar content of Crisp Super Sweet 720 was 2-3 times higher than that of three sweet corn hybrids. Soluble solids were continuously increased with maturity in three sweet com varieties, but that of Crisp Super Sweet 720 increased up to 24 DAS, maintained the level through 30 DAS and then decreased. At harvest time soluble solids of three sweet com varieties were much higher than that of Crisp Super Sweet 720. The optimum harvest time seems to be about 27 DAS considering flavor rate and marketing conditions although the total sugar content was lower than those of earlier harvests. Soluble solids but not total sugars were positively correlated with the flavor of cooke6 com harvested at different growth stages in the same variety. Total sugars were not correlated with soluble solids or negatively correlated depending on hybrids.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.13-23
• /
• 2014

A lab-scale Anaerobic Baffled Reactor (ABR) was applied to treat a primary sludge taken from a municipal wastewater treatment plant. In this experiment, acidogenic reaction was promoted by operating the ABR with short hydraulic retention time (HRT) to produce sufficient volatile fatty acids (VFA) instead of production of methane. The performance of ABR on the VFA production and total solids reduction was observed with different operating conditions with 2, 4, 6, and 8 days of HRT. Corresponding organic loading rates were 6.7, 3.4, 2.2, and $1.6kgCOD_{cr}/m^3{\cdot}day$. As HRT increased the removal rate of TCOD was also increased (82.5, 84.2, 96.9, and 95.9 % in average for HRT of 2, 4, 6, and 8 days, respectively) because the settlement of solids was enhanced in the baffle by the decrease of upflow velocity. At HRT of 2 days the average concentration of VFA in the effluent was measured at $1,306{\pm}552$ mgCOD/L corresponding to 107 % increment as compared to the VFA concentration in the influent. However, as HRT increased VFA concentraiotn was decreased to $143{\pm}552$ mgCOD/L at HRT of 8 days. The reduction rates of total solids were 12.2, 26.5, 24.8, and 43.0 % for HRT of 2, 4, 6, and 8 days. As HRT increased the hydrolysis of organic particulate matters in the reactor was enhanced due to the increasing of solids retention time in the baffle zone with low upflow velocity in long HRT condition. Consequently, we found that a primary sludge became a good source of VFA production by the application of ABR process with HRT less than 4 days and the 12-26 % of total solids reduction was expected at these conditions.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.672-679
• /
• 2006

Postharvest nut quality, and changes of soluble solids content and kernel hardness during cold storage in 13 Korean prevailing chestnut cultivars were investigated to establish the chestnut grading and standardization for marketing and processing industry. Chestnut quality attributes such as nut weight, soluble solids content, kernel hardness, % with the pericarp split, and % of polyembryonic nuts were measured from 2001 to 2005. There were significant difference among cultivars in quality characteristics, and also annual variation within same cultivar, corresponded to the high genetic and environmental variability. During cold storage at $2^{\circ}C$ for 16 weeks, remarkable changes in soluble solids content were observed, and Isseumo showed the highest increase of 8% at 16 weeks of cold storage compared with postharvest. In case of most cultivars except early ripening cultivars, soluble solids content of chestnut increased until 12 weeks during cold storage, followed by decreased gradually thereafter. Kernel hardness of most cultivars except lshizuchi during cold storage increased slightly, but it was not statistically significant. This work would be a useful reference to the quality of each chestnut cultivar for the growers and breeders alike.

• Proceedings of the CALSEC Conference
• /
• 1998.10a
• /
• pp.57-68
• /
• 1998

ㆍ STEP is an International Standard (ISO 10303) - that defines the methodology to create computer interpretable product data models. ㆍ STEP Implementation - allows exchange and sharing of product data while retaining semantics throughout the product life cycle. ' STEP is in deployment - PDM data exchange at Boeing and others - Geometry data exchange at GM and others ㆍ The STEP community overcomes obstacles - “They will never finish the standard” (done 1994) - “They will never be able to transfer solids” (done 1995) - “They will never make solids transfer reliable” (done 1997) - “They will never implement all those Application Protocols”(TBD)(omitted)

• 전기의세계
• /
• v.16 no.3
• /
• pp.21-27
• /
• 1967

We meet with the fact that a majority of electric machinery have been insulated to the state of solids & liquids or solids & gases, that is, with compound dielectrics. And also we can find voids caused by undesirbble structure, long-used material and so on. When it is discharged in a void or in the parts of gases of insulating material, the insulation of the machinery is gradually and finally destroyed through the effect of ozone, nitrogen-oxide, electronic pulses and so on. So we maybe conculded that it is necessary and important to detected void pulse and void corona in order to prevent sudden break down of electric machinery.

• Structural Engineering and Mechanics
• /
• v.18 no.1
• /
• pp.59-78
• /
• 2004

This paper is devoted to illustrate some numerical procedures to solve the boundary equilibrium problems of three-dimensional solids that are subjected to thermal strains. The constitutive equations take into account the bounded tensile strength of the material and they are presented in the framework of non-linear elasticity and small strains. The associated equilibrium problem is solved numerically by means of the finite element method and the numerical techniques, i.e. the Newton-Raphson method and the secant method, are revised in order to assure the solution convergence of the discretized problem. Some numerical examples are illustrated.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.9-15
• /
• 2004

Micro inorganic solids and dissolved materials contained in the white water of linerboard process was obtained by centrifugation, and their characteristics were analyzed along with their effects on the mechanical properties of linerboard. Micro inorganic materials had little influence on tensile index and ZDT of UKP sheets. They showed rather a positive effect on mechanical properties of KOCC sheets due to adsorbed polymer. Mechanical properties of KOCC sheets decreased remarkably when the concentration of dissolved materials increased especially above 4000 ppm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.97.1-97
• /
• 2001

One of the main problems to constitute control method on biologically oriented wastewater purification processes, e.g. activated sludge process, sequential batch reactor, rotating bio-disk contactor, etc. is that it is hard to control the target component directly. For instance, while biochemical oxygen demand, suspended solids, and chemical oxygen demand are the key components to check the process performance, one may not control them directly since they are the results of microbial activities related to numerous physiochemical factors. Therefore controllers for bioprocess should be designed to make favorable condition for microorganisms´ living, e.g. dissolved oxygen level favorable, mixed liquor suspended solids concentration suitable ...

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.706-711
• /
• 2003

A numerical method is presented for computing unsteady incompressible two-phase flows with immersed solids. The method is based on a level set technique for capturing the phase interface, which is modified to satisfy a contact angle condition at the solid-fluid interface as well as to achieve mass conservation during the whole calculation procedure. The modified level set method is applied for numerical simulation of bubble deformation in a micro channel with a cylindrical solid block and liquid jet from a micro nozzle.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.2
• /
• pp.28-31
• /
• 1977

Normal modes of carrier waves due to longitudinal modulation in solids have been defined. The dispersion relationship of these waves in the presence of collision effects and thermal diffusion is derived and examined in detail. It is also shown that the carrier waves are reduced to the wellknown space-charge waves and electroacoustic hayes in special cases.