• 한국축산식품학회지
• /
• 제38권3호
• /
• pp.515-529
• /
• 2018

The present study was designed to investigate the effects of calpain system on the formation of volatile flavor compounds in Hanwoo beef. In the first experiment (exp.1), Longissimus lumborum (LL) muscle samples were injected with solutions containing 50 mM $CaCl_2$ or 50 mM $ZnCl_2$ and 154 mM NaCl respectively, and aged for 7 d at $4^{\circ}C$. In the second experiment (exp.2), the ground LL muscle was incubated with the aforementioned solutions containing cathepsin inhibitor. The injection with $CaCl_2$ solution greatly elevated the calpain activity and concomitantly, significantly decreased the Warner-Bratzler shear force (p<0.05). The pH, meat color and cooking loss did not differ (p>0.05) between the treatment groups. A total of 51 volatile compounds were identified using the solid phase microextraction with gas chromatography (SPME-GC). Results on volatile analyses from the both experiments showed that the injection with calcium ions led to significant increase (p<0.05) concentrations of pyrazines and sulfuric compounds. These results coincide with a higher rate of protein degradation due to the $CaCl_2$ injection as compared to the control group. Significantly (p<0.05) higher levels of lipid oxidation derived-aldehydes were found in the samples with $ZnCl_2$. The exp.1 showed that cathepsin inhibitors had no effect on the formation of volatile flavor components after 7 d of aging. These results imply that the proteolytic activity of the calpain system is associated with generation of volatile compounds of chiller-aged beef, while the role of cathepsins is likely very limited.

• 한국재료학회지
• /
• 제20권2호
• /
• pp.72-77
• /
• 2010

Glass-ceramics were fabricated by heat-treatment of glass obtained by melting a coal bottom ash with $Li_2O$ addition. The main crystal grown in the glass-ceramics, containing 10 wt% $Li_2O$, was $\beta$-spodumene solid solution, while in $Li_2O$ 20 wt% specimen was mullite, identified using XRD. The activation energy and Avrami constant for crystallization were calculated and showed that bulk crystallization behavior will be predominant, and this expectation agreed with the microstructural observations. The crystal phase grown in $Li_2O$ 10 wt% glass-ceramics had a dendrite-like shaped whereas the shape was flake-like in the 20 wt% case. The thermal expansion coefficient of the $Li_2O$ 10 wt% glass-ceramics was lower than that of the glass having the same composition, owing to the formation of a $\beta$-spodumene phase. For example, the thermal expansion coefficient of $Li_2O$ 10 wt% glass-ceramics was $20\times10^{-7}$, which is enough for application in various heat-resistance fields. But above 20 wt% $Li_2O$, the thermal coefficient expansion of glass-ceramics, on the contrary, was higher than that of the same composition glass, due to formation of mullite.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.165-170
• /
• 1997

Samples of extruded dispersions of 24 vol.% spherical U-2wt%Mo and U-10wt.%Mo powders in an aluminum matrix were annealed for over 2,000 hours at 40$0^{\circ}C$. No significant dimensional changes occurred in the U-1025.%Mo/aluminum dispersions. The U-2wt.%Mo/aluminum dispersion, however, increased in volume by 26% after 2,000 hours at 40$0^{\circ}C$. This large volume change is mainly due to the formation of voids and cracks resulting from nearly complete interdiffusion of U-Mo and aluminum. Interdiffusion between U-10wt.%Mo and aluminum was found to be minimal. The different diffusion behavior is primarily due to the fact that U-2wt.%Mo decomposes from an as-atomized metastable r-phase(bcc) solid solution into the equilibrium r-U and U$_2$Mo two-phase structure during the experiment, whereas U-10wt.%Mo retains the metastable r-phase structure after the 2,000 hours anneal and thereby displays superior thermal compatibility with aluminum compared to U-2wt.%Mo. In addition, the molybdenium supersaturated in U-10wt.%Mo particles inhibits the diffusion of aluminum atoms along the grain boundary into the particle. Also, the dissolution of only a few Mo atoms in UAL$_3$ retards the formation of the intermediate phase, as Mo atoms need to migrate from new intermetallic compounds to unreacted islands.

• Advances in materials Research
• /
• 제8권1호
• /
• pp.47-73
• /
• 2019

Joining of Mg/Ti hybrid structures by welding for automotive and aerospace applications has attracted great attention in recent years due mainly to its potential benefit of energy saving and emission reduction. However, joining them has been hampered with many difficulties due to their physical and metallurgical incompatibilities. Different joining processes have been employed to join Mg/Ti, and in most cases in order to get a metallurgical bonding between them was the use of an intermediate element at the interface or mutual diffusion of alloying elements from the base materials. The formation of a reaction product (in the form of solid solution or intermetallic compound) along the interface between the Mg and Ti is responsible for formation of a metallurgical bond. However, the interfacial bonding achieved and the joints performance depend significantly on the newly formed reaction product(s). Thus, a thorough understanding of the interaction between the selected intermediate elements with the base metals along with the influence of the associated welding parameters are essential. This review is timely as it presents on the current paradigm and progress in welding and joining of Mg/Ti alloys. The factors governing the welding of several important techniques are deliberated along with their joining mechanisms. Some opportunities to improve the welding of Mg/Ti for different welding techniques are also identified.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.86-86
• /
• 2012

The new approaches for silicon solar cell of new concept have been actively conducted. Especially, solar cells with wire array structured radial p-n junctions has attracted considerable attention due to the unique advantages of orthogonalizing the direction of light absorption and charge separation while allowing for improved light scattering and trapping. One-dimenstional semiconductor nano/micro structures should be fabricated for radial p-n junction solar cell. Most of silicon wire and/or pillar arrays have been fabricated by vapour-liquid-solid (VLS) growth because of its simple and cheap process. In the case of the VLS method has some weak points, that is, the incorporation of heavy metal catalysts into the growing silicon wire, the high temperature procedure. We have tried new approaches; one is electrochemical etching, the other is noble metal catalytic etching method to overcome those problems. In this talk, the silicon pillar formation will be characterized by investigating the parameters of the electrochemical etching process such as HF concentration ratio of electrolyte, current density, back contact material, temperature of the solution, and large pre-pattern size and pitch. In the noble metal catalytic etching processes, the effect of solution composition and thickness of metal catalyst on the etching rate and morphologies of silicon was investigated. Finally, radial p-n junction wire arrays were fabricated by spin on doping (phosphor), starting from chemical etched p-Si wire arrays. In/Ga eutectic metal was used for contact metal. The energy conversion efficiency of radial p-n junction solar cell is discussed.

• 청정기술
• /
• 제17권1호
• /
• pp.31-36
• /
• 2011

산성, 중성, 염기성의 감마알루미나에 (3-mercaptopropyl) trimethoxysilane (3-MPTMS)를 알루미나 기공 내에 도입하고 30 wt% 과산화수소수를 이용하여 황산기가 결합된 감마알루미나를 합성하였다. 1 M HCl 용액을 이용하여 3-MPTMS의 도입을 좀 더 용이하게 하였다. 합성된 촉매는 자일로즈 탈수화 반응을 통한 푸르푸랄 생성반응에 적용하여 촉매 특성을 분석하였다. 모든 촉매 반응에서 우수한 자일로즈 전환률을 보였고, 황산가가 도입된 촉매가 푸르푸랄의 선택도를 높이는 결과를 보였다.

• Journal of Pharmaceutical Investigation
• /
• 제24권2호
• /
• pp.85-94
• /
• 1994

Inclusion complexes of ketoconazole (KT) with ${\alpha}-$, ${\beta}-cyclodextrin$ (CD) and dimethyl-${\beta}-cyclodextrin$ $(DM{\beta}CD)$ in a molar ratio of 1:2 were prepared by freeze-drying and solvent evaporation methods. The interactions of KT with ${\alpha}-CD$, ${\beta}-CD$ and $DM{\beta}CD$ in aqueous solution and in solid state were investigated by solubility study, infrared (lR) spectroscopy and differential scanning calorimetry (DSC). The stability constant of $KT-DM{\beta}CD$ inclusion complex (lC) was found to be the largest among three inclusion complexes. Clear differences in IR spectra and DSC curves were observed between inclusion complexes and physical mixtures (PM) of KT-CDs. It was also shown by IR spectra and DSC curves that solvent evaporation method might be. superior to the freeze-drying method in preparing the inclusion complexes of KT-CDs. The dissolution rate of KT was markedly increased by inclusion complex formation with CDs in the buffer solution at pH 4.0 and pH 6.8. The mean dissolution time (MDT,min), which represents the rapidity of dissolution, was in the order of $KT-DM{\beta}CD$ IC (3.20) < $KT-{\beta}-CD$ IC (4.36) < $KT-{\alpha}-CD$ IC (6.99) < $KT-{\alpha}-CD$ PM (17.46)< $KT-{\beta}-CD$ PM (19.36) < $KT-{\beta}-CD$ PM (28.53). The dissolution rates of KT-CD ICsprepared by solvent evaporation method were faster than those of KT-CD ICs prepared by freeze-drying method.

• 공업화학
• /
• 제30권1호
• /
• pp.34-38
• /
• 2019

탄산화 공정을 위한 Ca 추출원으로 시멘트 산업부산물을 사용하였다. ICP와 XRD 분석을 통하여 시멘트 산업부산물은 대부분 CaO와 KCl로 구성되어 있음을 확인하였다. 최적화된 추출용제의 종류 및 농도는 1.5 M of hydrochloric acid이며 최적의 고액비는 0.1 g/mL이었다. 추출 성능 실험 결과를 통해 양이온의 추출효율은 이온 결합 형태 및 용해도에 의존함으로 판단되었다. 또한 추출 공정 후, 첨가물의 종류 및 주입 순서에 따라 선택적으로 양이온이 분리될 수 있음을 확인하였다. pH를 9.5, 13으로 조절하기 위하여 NaOH를 주입하였을 때 불순물과 $Ca(OH)_2$가 침전되었으며, $C_2H_5OH$를 주입한 경우 KCl 형태로 분리된 K가 침전되었다.

• 자원환경지질
• /
• 제26권3호
• /
• pp.327-335
• /
• 1993

자연에는 팔라듐을 주성분으로 하는 백금족광물이 다수 산출되고 있다. 그 중 일부 광물은 독립된 광물로서 결정학적 광물학적 연구가 잘 되어 있는 반면 아직도 광물로서의 특성이 완전하게 규명되지 못한 경우도 상당수가 있다. 따라서 이 연구에서는 팔라듐-안타몬-테루르 성분계를 택해 이 3성분계에서의 상관계를 $1000^{\circ}C$, $800^{\circ}C$, $600^{\circ}C$에서 각각 연구하고 이들 연구결과를 천연광물을 보다 체계적으로 규명 보완하는데 적용시키는 것을 그 연구 목적을 두었다. 합성실험을 위해 순수한 원소물질을 정량적으로 혼합시킨 후 실리카 튜브에 넣고 진공상태에서 밀봉하였다. 전기 고온로에서 가열반응시킨 시료는 얼음물을 이용해 급냉시켰으며 반응물은 반사현미경, 전자현미분석, X선 회절법 등으로 분석하였다. $1000^{\circ}C$에서 안정한 고체로는 Pd, $Pd_{20}Sb_7$, $Pd_8Sb_3$, $Pd_{31}Sb_{12}$, $Pd_5Sb_2$가 있다. $800^{\circ}C$에서는 $Pd_5Sb_3$, PdSb, $Pd_8Te_3$, $Pd_7Te_3$, $Pd_{20}Tc_7-PdSb_7$ 완전고용체가 추가로 존재한다. $600^{\circ}C$에서는 $PdSb_2$, $Pd_{17}Te_4$, $Pd_9Te_4$, PdTe, $PdTe_2$, $Sb_2Te_3$, Sb, 그 밖에 PdSb-PdTe와 PdTe-$PdTe_2$ 고용체가 다시 안정한 고체 화합물로 추가된다. 모든 고체 화합물이 Sb와 Te간의 원소치환에 의해 고용체를 이루고 있으며 그 고용한계의 범위는 생성온도에 따라 변한다. Pd-Sb화합물에서 안티몬(Sb)를 치환하는 테루르(Te) 최대 치환범위(at.%)는 $Pd_8Sb_3$에서 44.3, $Pd_{31}Sb_{12}$에서 52.0, $Pd_5Sb_2$에서 46.2이며 그 최대 치환현상은 $800^{\circ}C$에서 일어난다. $Pd_5Sb_3$와 $PdSb_2$에서의 최대 치환은 $600^{\circ}C$에서 일어나며 그 정도는 각각 15.3, 68.3이다. Pd-Te화합물에서 Te를 치환하는 Sb의 최대치(at.%)는 $Pd_8Te_3$가 $800^{\circ}C$에서 34.5, $Pd_7Te_3$, $Pd_{17}Te_4$, $Pd_9Te_4$, $PdTe_2$는 $600^{\circ}C$에서 각각 41.6, 5.2, 19.1로 나타난다. $Pd_9Te_4$, PdTe, $PdTe_2$, $Pd_8Sb_3$, PdSb, $Sb_2Te_3$는 각각 tellurantimony와 일치하며 광학적 결정구조적 성질이 매우 잘 일치한다. 지금까지 등축정계의 Pa3구조를 가지고 있는 것으로 알려진 $PdSb_2$화합물은 Gandolfi camera와 Guinier camera법에 의해 310으로 격자 지수화할 수 있는 $2.035{\AA}$ peak가 일정하게 기록이 되므로 $P2_13$공간군에 속하는 것으로 재평가 된다. Testibiopal1adite의 성분을 가지는 PdSbTe성분의 화합물을 합성하여 X선 회절분석을 실시하면 testibiopalladite의 X선 회절양상과 일치함을 알 수 있다. 이 사실은 testibiopalladite가 등축정계이며 동시에 $P2_13$공간군에 속하는 $PdSb_2-Pd(Sb_{0.32}Te_{0.68})$고용체의 일부분에 속하는 광물임을 알 수 있게 한다. 따라서 현재의 testibiopalladite의 이상화학식인 PdSbTe는 PdTe(Sb, Te)로 바뀌어져야 할 것으로 믿어진다. $Pd_3SbTe_4$로 표현되는 borovskite는 $1000^{\circ}{\sim}600^{\circ}C$의 온도범위에서는 존재하지 않음을 알 수 있다.

• 한국재료학회지
• /
• 제7권2호
• /
• pp.129-135
• /
• 1997

용탕단조법에 의해 제조된 Mg-6AI-xZn(x=0,1,2)합금의 기계적 성질에 미치는 시효열처리의 영향을 조사하였다. 주조상태에서의 미세조직은 초정 Mg고용체, 과포화된 상태의 Mg상, 응고과정에서 형성된 $\beta(Mg_{17}AI_{12}$)화합물 등 3개의 상으로 구성되어 있었다. 용체화처리 수 $200^{\circ}C$및 $240^{\circ}C$에서 시효열처리한 결과 Mg-6AI-xZn(x=0,1,2)합금은 $\beta$ 석출물에 의한 피크 경도값이 나타났으며, 석출물의 형태는 $200^{\circ}C$에서는 lamella 형태의 불연속 석출물이, $240^{\circ}C$에서는 미세분산분포된 연속석출물의 형태를 보였다. 용탕단조방법에 의해 제조된Mg-6AI-xZn합금의 기계적 성질은 사형주조법에 비해 인장강도 및 연신율에서 우수한 특성을 보였으며 Zn의 첨가량이 증가함에 따라 Zn의 고용강화 효과에 따라 강도값이 증가되었다.