• Advances in nano research
• /
• v.2 no.2
• /
• pp.77-88
• /
• 2014

Solvothermal treatment of late transition metal acetylacetonates in a novel medium composed either of pure acetophenone or acetophenone mixtures with amino alcohols offers a general approach to uniform hydrophilic metal nanoparticles with high crystallinity and low degree of aggregation. Both pure metal and mixed-metal particles can be accesses by this approach. The produced materials have been characterized by SEM-EDS, TEM, FTIR in the solid state and by Nanoparticle Tracking Analysis in solutions. The chemical mechanisms of the reactions producing nanoparticles has been followed by NMR. Carrying out the process in pure acetophenone produces palladium metal, copper metal with minor impurity of $Cu_2O$, and NiO. The synthesis starting from the mixtures of Pd and Ni acetylacetonates with up to 20 mol% of Pd, renders in minor yield the palladium-based metal alloy along with nickel oxide as the major phase. Even the synthesis starting from a mixed solution of $Cu(acac)_2$ and $Ni(acac)_2$ produces oxides as major products. The situation is improved when aminoalcohols such as 2-aminoethanol or 2-dimethylamino propanol are added to the synthesis medium. The particles in this case contain metallic elements and pairs of individual metals (not metal alloys) when produced from mixed precursor solutions in this case.

• Tribology and Lubricants
• /
• v.28 no.6
• /
• pp.278-282
• /
• 2012

Various bearings such as deep-groove ball bearings, angular-contact ball bearings, and roller bearings are used to support the load and to lubricate between the shaft and the housing. The bearings of potential rolling systems in a turbo pump are the deep-groove ball bearings as comparing with the bearings with rolling elements such as cylindrical rollers, tapered cylindrical rollers, and needle rollers. The deep-groove ball bearings consist of rolling elements, an inner raceway, an outer raceway and a retainer that maintain separation and help to lubricate the rolling element that is rotating in the raceways. In the case of water-lubricated ball bearings, however, fluid friction between the ball and raceways is affected by the entry direction of flow, rotation speed, and flow rate. In addition, this friction is the key factor affecting the bearing life cycles and reliability. In this paper, the characteristics of flow conditions corresponding to a deep-groove ball bearing are investigated numerically, with particular focus on the friction distribution on the rolling element, in order to extend the analysis to the area that experiences solid friction. A simple analysis model of fluid flow inside the water-lubricated ball bearing is analyzed with CFD, and the flow characteristics at high rotation speeds are presented.

• Journal of Korea Port Economic Association
• /
• v.17 no.1
• /
• pp.73-90
• /
• 2001

Logistics has become a key element in a shipping firm's overall strategy, now that the concept of logistics has expanded into one that is more comprehensive and integrated. furthermore, the global shipping market is the most competitive market in the world. In this environment, shipping firms are using Logistics Information Systems (LIS), which help them to save time and reduce costs. As such, LIS has become a critical part of Korea's attempts to develop Its national logistics system and industry. In this light, this study attempted to empirically determine the critical elements necessary for effective shipping LIS implementation and to then analyze how these elements are related to actual logistics performance within the shipping industry. The research results show that the sample firms considered the following factors to be most Important to an effective LIS: the support of top management; an efficient and well-structured communication channel; a solid strategic implementation plan; and a high level of information analysis internally. Other factors mentioned as being somewhat significant included MIS organization and human resources, MIS discipline and training, software development capabilities, MIS organizational alignment, database management systems information standardization, competitive advantage, financial support and government support The main problems with current shipping LIS include the expensive cost of systems, lack of standardized working processes, and weak organizational structures.

• Archives of Craniofacial Surgery
• /
• v.21 no.3
• /
• pp.180-183
• /
• 2020

Meningothelial hamartoma is a benign tumor composed of ectopic meningothelial elements in the dermis and subcutaneous tissue. It mainly occurs in the scalp; however, the incidence is extremely low. The origin of meningothelial hamartoma has not been elucidated; nevertheless, it has been theorized that it derives from ectopic meningothelial rests displaced during embryologic development. It can be diagnosed histologically as proliferation of connective tissue elements and cells arranged in solid nests, resembling vascular tumors. On immunohistochemistry, it stains positively for epithelial membrane antigen and vimentin. At least 17 cases have been reported, verifying the rarity of the lesion. We present the case of a 16-year-old male patient with a soft scalp mass which was thought to be a lipoma, but turned out to be a meningothelial hamartoma on histology.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.9-16
• /
• 2010

In this study, structural analyses were carried out on the composite sandwich panel which was tested under compression loading. In the structural analyses, three types of finite element modelling were considered and linear buckling analysis and nonlinear analysis were performed for each FE-model. Through the analyses, it was found that shell elements for face parts and solid elements for core part were appropriate for the better prediction of the buckling load of the panel. If the material failure of the face is critical than overall buckling of the sandwich panel, the use of one shell element through the thickness direction was suitable in the FE-model for the better predictions of failure location and failure load.

• Structural Engineering and Mechanics
• /
• v.33 no.4
• /
• pp.407-428
• /
• 2009

The effects of the uniform and spatially varying ground motions on the stochastic response of fluid-structure interaction system during an earthquake are investigated by using the displacement based fluid finite elements in this paper. For this purpose, variable-number-nodes two-dimensional fluid finite elements based on the Lagrangian approach is programmed in FORTRAN language and incorporated into a general-purpose computer program SVEM, which is used for stochastic dynamic analysis of solid systems under spatially varying earthquake ground motion. The spatially varying earthquake ground motion model includes wave-passage, incoherence and site-response effects. The effect of the wave-passage is considered by using various wave velocities. The incoherence effect is examined by considering the Harichandran-Vanmarcke and Luco-Wong coherency models. Homogeneous medium and firm soil types are selected for considering the site-response effect where the foundation supports are constructed. A concrete gravity dam is selected for numerical example. The S16E component recorded at Pacoima dam during the San Fernando Earthquake in 1971 is used as a ground motion. Three different analysis cases are considered for spatially varying ground motion. Displacements, stresses and hydrodynamic pressures occurring on the upstream face of the dam are calculated for each case and compare with those of uniform ground motion. It is concluded that spatially varying earthquake ground motions have important effects on the stochastic response of fluid-structure interaction systems.

• Korean Institute of Interior Design Journal
• /
• v.17 no.3
• /
• pp.94-101
• /
• 2008

The purpose of this study was to analyze the preference of living room furniture and to suggest Korean brand furniture design guideline. Subjects consisted of 171 residents aged up 20 years old in Seoul and Kyung-ki. area. The data were analyzed using the SPSS statistical package. The results of descriptive statistics, factor analysis, t-test and $x^2$-test are presented. The result of this study showed as fallows; 1) Livingroom funiture design with considering family life behavior were needed. 2) Modernizing traditional elements(motives and pattern) were preferred to duplicating traditional elements. 3) In furniture materials, easy to maintaining and cleaning and environmentally-sound materials as solid wood were highly appraised. Also, functional and harmonious furniture design with interior or other furniture were needed. So, modular-system furniture for livingroom would fulfill user's needs which are function, harmony and conciseness. 4) Elegant, easy, unique, functional, and simple design for livingroom were highly appraised. Considering these results, it is necessary to develop more on the modernized traditional furniture based on the various needs of users. These results provide a practical guideline for the development of the Korean brand design for livingroom furniture design.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.223-231
• /
• 2007

Considering wind speed uncertainty, reliability analysis of the LNG unloading arm at Tongyoung Production Site was performed. Extreme distribution of wind speed was estimated from the data collected at the weather center and wind load was calculated using wind velocities and coefficients of wind pressure. The unloading arm was modeled with plate and solid elements. Contact elements were used to describe the interface between base of structure andground. Response surface for maximum effective stress was found for reliability analysis and then reliability functions was defined and used to determine exceeding probability of allowable and yield stresses. In addition, sensitivity analysis was also performed to estimate the effect of possible material deterioration in the future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.248-251
• /
• 2005

To investigate the degeneration process in the intervertebral disc, a three dimensional (3D) poroelastic finite-element (FE) model was developed. Disc was modeled as two different regions, such as annulus modeled with fiber reinforced 20 node poroelastic ground matrix and nucleus having large porosity. Excess Von Mises stress in the disc element assumed to be a possible source of degeneration under compressive loading condition. Recursive calculation was continued until the desired convergence was attained by changing the permeability and porosity of those elements, which could be predicted from the previous iteration. The degenerated disc model showed that relatively small compressive stresses were generated in the nucleus elements compared to normal disc. Its distribution along the sagittal plane was matched well with a previously reported experimental result. Contrasts to this result, pore pressures in the nucleus were higher than those in the normal disc. Total stress indicated similar values for two different models. This new approach using poroelastic modeling could provide the explanation of the interaction between fluid and solid matrix in the disc during the degeneration process.

• Computers and Concrete
• /
• v.25 no.4
• /
• pp.355-367
• /
• 2020

This paper proposed a numerical investigation based on finite elements analysis (FEA) in order to study the punching shear behavior of reinforced concrete (RC) flat slabs using ABAQUS and SAP2000 programs. Firstly, the concrete and the steel reinforcements were modeled by hexahedral 3D solid and linear elements respectively, and the nonlinearity of the used materials was considered. In order to validate this model, experimental results considered in literature were compared with the proposed FE model. After validation, a parametric study was performed. The parameters include the slab thickness, the flexure reinforcement ratios and the axial membrane loads. Then, to reduce the time of FEA, a simplified modelling using 3D layered shell element and shear hinge concept was also induced. The effect of the footings settlement was studied using the proposed simplified nonlinear model as a case study. Results of numerical models showed that increase of the slab thickness by 185.7% enhanced the ultimate load by 439.1%, accompanied with a brittle punching failure. The punching failure occurred in one of the tested specimens when the tensile reinforcement ratio increased more than 0.65% and the punching capacity improved with increasing the horizontal flexural reinforcement; it decreased by 30% with the settlement of the outer footings.