• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.3
• /
• pp.1-11
• /
• 2008

Although landslides were frequently occurred under Tripterygium regelii and Rubus sp. vegetations, the damage of landslide was not observed in sasa (Sasa borealis) stands. These phenomena may be affected by forest vegetation types. This result suggested that the landslide occurred in Jirisan (Mt.) National Park may be closely related to water retention capacity at Sasa borealis stands. This study compared and analyzed the water retention capacity of each soil horizon of sasa, larch (Larix leptolepis) and mongolian oak (Quercus mongorica) stands. Soil bulk density in A horizon was lower in sasa (0.776g/$cm^3$) than in mongolian oak (0.828g/$cm^3$) and in larch stands (1.282g/$cm^3$). Water permeability in A horizon was 0.02055cm/sec for sasa, 0.00575cm/sec for mongolian oak, and 0.0007cm/sec for larch stands, respectively. The water permeability of sasa stand was about 3.6 times and about 29 times higher than in mongolian oak and in larch stands, respectively. This result indicates that water infiltration of soil surface during a rain event is more rapid in sasa than in other two stands. Soil organic matter content in B horizon was lower in larch (0.7%) than in mongolian oak (6.5%) and in Sasa (3.3%) stands. The solid ratio in A horizon was highest in larch among three stands, but that of mongolian oak and larch stands showed a similar rate. Pore space rates was 70.7% for A horizon and 70.6% for B horizon of sasa, 68.9% for A horizon and 70.6% for B horizon of sasa, 68.9% for A horizon and 70.6% for B horizon of mongolian oak forests and 51.7% for A horizon and 49.2% for B horizon of larch forests, respectively. According to pore space rates, the water retention capacity may be poor in larch stand compared with other two stands. Soil strength in sasa and mongolian stands was over 25kgf/$cm^2$ from 40cm depth, while the strength was over 25kgf/$cm^2$ from 25cm depth in larch stand. The result indicates that tree growth and water permeability in larch stand could be limited due to high soil strength. Larch stand was poor for soil pore space development to be offered to the water retention capacity, but water retention capacity of A horizon soil in sasa stand was high than that of other two stands. Therefore, establishment of sasa stand under larch stand could help to prevent landslides.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.3
• /
• pp.168-173
• /
• 1989

In this report two experiments were carried out. Vertical distribution of exchangeable potassium(K) of soil in the orchardgrass meadow was investigated‘ a and K leaching from soil was monitored under lysimeter condition throughout one year. The results obtained a are as follows; The difference in the exchangeable soil K content b between the soil layers was very small in K-zero plot of the orchard grass meadow, but it was significant in K¬h high plot (Experiment 1). T The volume of leached water from the Iysime ter was a about 471 liters/m2 during a year and the amount of leached water was influenced by the precipitation. D During the investigation the quantity of leached K was 2 22.3 g/$m^2$. About 40 % of the total K in a year leached out during the first two months, May and June, after the start of the experiment. On the other hand, leached K amounted to 13.2 g/$m^2$ (60 % of the total K leached) during the period of ten months from July, 1985 to A April, 1986, when forages were harvested from the soil o of the lysimeter (Experiment 2). From the above results, it was known that K leach¬i ing from grassland soil can be also occurred in consider¬a able amount when the growth stage of forage is not d developed or soil does not become solid on such a p period as immediately after grassland improvement or e establishment. However, unless the K leaching from soil s seems to be little under the condition of permanent g grassland ecosystem with higher grade of soil hardness a and possibly with compact density of forage plants.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.853-859
• /
• 2001

The dispersion stability of nano $Y_2O_3-CeO_2$ system was investigated using colloid surface chemistry. Green body of $Y_2O_3$ doped $CeO_2$ was prepared by slip casting in and aqueous system. The dispersion stability of suspension between powders and organic additive was accomplished through electrokinetic behavior of suspension, which was done by ESA apparatus. The dynamic mobility of particles was enhanced when the anionic dispersant of the amount of 1wt% was added. The dissolution of $Y^{3+}$ ion in suspension occurred in the acidic region so that pH value in slurries did not move to below 7.0. In the $CeO_2-Y_2O_3$ system, optimal preparation of suspension was made after adding the anionic dispersant as the amount of 1wt% and pH value of 11.0, and then slip-cast and sintered at 1400$^{\circ}$C, 2 hrs. It appeared relative density of >98% and homogeneous distribution of Y element in depth direction as well as in the microstructure of surface.

• The Korean Journal of Mycology
• /
• v.28 no.2
• /
• pp.97-102
• /
• 2000

The mycelial growth of Pleurotus ostreatus in compost is strongly stimulated by solid-state fermentation with thermophilic fungi which were isolated from oyster mushroom compost. The biochemical characteristics of these thermophilic fungi were investigated. Cellulase and ligninase activities were not detected by clear zone effect on CMC and lignin media. All of thermophilic fungi grew well with high mycelial density on xylan media and the growing rate of Sepedonium sp. S-2 observed very high. In results of MUF-test, extracellular enzyme activity of Sepedonium sp. S-2, and S-5 measured very high. On the compost after high temperature fermentation with Sepedonium sp. S-2 and S-5, the mycelial growing rate of Pleurotus ostreatus was increased about 50% and it also showed the inhibiting effect on mycelial growth of Trichoderma sp. SJG-51. Isolated thermophilic fungi, Sepedonium sp. S-2 and S-5 were expected as very useful organism for making oyster mushroom compost.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.279-286
• /
• 1983

An apparatus was made for the electrodeposition of alpha emitting actinide nuclides, $^{207}Bi$ and $^{210}Po$. The electrodeposition was made on a polished stainless steel plate cathode. The anode was made of platinum wire and to stir the solution. With the ammonium chloride as electrolyte initial pH = 4, chloride concentration = 0.6M and solution volume = 15ml, a current of 1.5 ampere(current density = 0.59A/$cm^2$) was flowed for 100 minutes for the quantitative recovery of electrodeposition and on average recovery of 98.3% was obtained within ${\pm}$0.7% uncertainty. Alpha spectrometry of the electrodeposited sample showed alpha peaks from $^{210}Po, ^{234}U$ and $^{239}Pu$ having energy resolution (FWHM) of 18.3, 21.8 and 36.0 keV respectively. The electrodeposition and alpha spectrometry for a natural uranium sample of domestic origin gave $^{238}U : ^{234}U = 1 : 6.1{\times}10^{-5}$ and for a neutron-irradiated uranium sample did $^{238}U : ^{239}Pu : ^{241}Am = 100 : 0.0263 : 5.20{times}10^{-5}$. The result of $^{238}U$ determination in the irradiated sample by electrodeposition-alpha spectrometry was in accord within ${\pm}1.6%$ of relative error with the results of solid fluorimetry and mass spectrometry. For $^{239}Pu$ the result of electrodeposition-alpha spectrometry was in accord within ${\pm}$4.0% of relative error with the results of anion exchange separation and the thenoyltrifluoroacetone(TTA) extraction both followed by alpha spectrometries.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.119-125
• /
• 2017

Ablative material in a rocket nozzle is exposed to high temperature combustion gas, thus undergoes complicated thermal/chemical change in terms of chemical destruction of surface and thermal decomposition of inner material. Therefore, method for conjugate analysis of thermal response inside carbon/phenolic material including rocket nozzle flow, surface chemical reaction and thermal decomposition is developed in this research. CFD is used to simulate flow field inside nozzle and conduction in the ablative material. A change in material density and a heat absorption caused by the thermal decomposition is considered in solid energy equation. And algebraic equation under boundary layer assumption is used to deduce reaction rate on the surface and resulting destruction of the surface. In order to test the developed method, small rocket nozzle is solved numerically. Although the ablation of nozzle throat is deduced to be higher than the experiment, shape change and temperature distribution inside material is well predicted. Error in temperature with experimental results in rapid heating region is found to be within 100 K.

• Korean Journal of Crystallography
• /
• v.13 no.3_4
• /
• pp.165-171
• /
• 2002

Single phase $Pb(Fe_{1/2}Ta_{1/2})O_3$, ceramics were successfully synthesized from the powders prepared by solid state reaction (sintering temperature: $1100^{\circ}C$, density: $9.3g/cm^3$, average grain size: $5.1{\pm}1.2mm$, space group: Pm3m). Their dielectric properties measured at $-150{\sim}50^{\circ}C$ showed the maximum relative dielectric constant of 31000 at $-41^{\circ}C$. 1 kHz, and typical relaxor ferroelectrics characteristics such as diffuse phase transition and dielectric relaxation phenomena. However, the diffuseness of phase transition decreased and the dielectric properties became more normal ferroelectrics as the time of annealing at $1000^{\circ}C$ increased. By using Raman spectroscopy, it was revealed that the $Fe^{3+}$ and $Ta^{5+}$ ions in the as-sintered $Pb(Fe_{1/2}Ta_{1/2})O_3$, are stoichiometrically 1 : 1 ordered within the short-range that can not be probed even by transmission electron microscopy, and this stoichiometric 1 : 1 ordering is enhanced by the annealing. The relaxor ferroelectric characteristics in the as-sintered $Pb(Fe_{1/2}Ta_{1/2})O_3$, could be correlated with the stoichiometric 1 : 1 short-range ordering of B-site cations, and the decrease of relaxor ferroelectric characteristics in the annealed $Pb(Fe_{1/2}Ta_{1/2})O_3$ could be correlated with the enhanced stoichiometric 1 : 1 short-range ordering of B-site cations.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.465-469
• /
• 2016

An entomopathogenic fungus was isolated from the two-spotted spider mite (Tetranychus urticae) in a rearing house, and identified as Neozygites floridana (Entomophthorales: Neozygitaceae). A high infection rate induced by N. floridana could increase the price of the natural enemy. The body color of mites infected by this fungus changed to red or orange and swelling occurred. Fungal conidia were discharged into the webbing produced by the spider mites, making it relatively easy to infect the mites. Primary conidia were pear shaped and capilliconidia almond shaped. The fungus could not be cultured on solid media (PDA, SDAY, or EYSDA), but could possibly be cultured in liquid media (Grace's insect tissue culture medium + 5% fetal bovine serum). Kidney beans were supplied as food for T. urticae; the mite infection rate in a kidney bean canopy was about 36.1%. The density of infected mites was higher on the underside than on the upper side of leaves. Based on the results of this survey, we need to identify methods of fungal control for natural enemy production and biological control agents for T. urticae for effective crop management.

• Journal of Environmental Science International
• /
• v.19 no.7
• /
• pp.871-877
• /
• 2010

The objectives of this study were to compare growth of Pllioblastus pygmaed and soil characteristics as affected by difference of soil thickness and mixture ratio in shallow-extensive green roof module system, and to identify the level of soil thickness and mixture as suitable growing condition to achieve the desired plants in green roof. Different soil thickness levels were achieved under 15cm and 25cm of shallow-extensive green roof module system that was made by woody materials for $500{\times}500{\times}300mm$. Soil mixture ratio were three types for perlit: peatmoss: leafmold=6:2:2(v/v/v, $P_6P_2L_2$), perlit: peatmoss: leafmold=5:3:2(v/v/v, $P_5P_3L_2$) and perlit: peatmoss: leafmold=4:4:2(v/v/v, $P_4P_4L_2$). On June 2006, Pllioblastus pygmaed were planted directly in a green roof module system in rows. All treatment were arranged in a randomized complete block design with three replication. The results are summarized below. In term of soil characteristics, Soil acidity and electric conductivity was measured in pH 6.0~6.6 and 0.12dS/m~0.19dS/m, respectively. Organic matter and exchangeable cations desorption fell in the order: $P_4P_4L_2$ > $P_5P_3L_2$ > $P_6P_2L_2$. $P_6P_2L_2$ had higher levels of the total solid phase and liquid phase, and $P_4P_4L_2$ had gas phase for three phases of soil in the 15cm and 25cm soil thickness. Although Pllioblastus pygmaed was possibled soil thickness 15cm, there was a trend towards increased soil thickness with increased leaf length, number of leaves and chlorophyll contents in 25cm. The growth response of Pllioblastus pygmaed had fine and sustain condition in order to $P_6P_2L_2$ = $P_5P_3L_2$ > $P_4P_4L_2$. However, The results of this study suggested that plants grown under $P_4P_4L_2$ appear a higher density ground covering than plants grown under $P_6P_2L_2$. Collectively, our data emphasize that soil thickness for growth of Pllioblastus pygmaed were greater than soil mixture ratio in shallow-extensive green roof module system.

• Clean Technology
• /
• v.20 no.4
• /
• pp.433-438
• /
• 2014

There is an increasing interest in the development of rechargeable batteries suitable for use in both hybrid electric vehicles and energy storage systems that require higher charge & discharge rates, bigger battery sizes and increased safety of the batteries. Spinel-type lithium titanium oxide ($Li_4Ti_5O_{12}$) as a potential anode for lithium ion batteries has many advantages. It is a zero-strain materials and it experiences no structural change during the charge/discharge precess. Thus, it has long cycle life due to its structural integrity. It also offers a stable operation voltage of approximately 1.55 V versus $Li^+/Li$, above the reduction potential of most organic electrolyte. In this study, Ru added $Li_4Ti_5O_{12}$ composites were synthesized by solid state process. The characteristics of active material were investigated with TGA-DTA, XRD, SEM and charge/discharge test. The capacity was reduced when Ru was added, however, the polarization decreased. The capacity rate of $Li_4Ti_5O_{12}$ with Ru (3%, 4%) addition was reduced during the charge/discharge precess with 10 C-rate as a high current density.