• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.1-5
• /
• 2017

This objective of this study is an effort to predict atomic oxygen (ATOX) erosion as ot affects coating material(s) of LEO satellite's solar array by implementing the 'real ram direction accumulation method'. We observed the difference of ATOX Fluence between the previous 'Maximum worst case estimation method' and 'Real ram direction accumulation method' and we plan to implement these findings for the purpose of evaluating the level of compliance for design submitted by solar array suppliers. We used the SPENVIS(Space Environment Information System) served by ESA based on assumption orbit information, and applied the satellite orbit calculation software for calculating the ATOX Flux crushed solar array in real orbit surface.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.382-385
• /
• 2004

Communication Ocean Meteorological Satellite (COMS) for the hybrid mission of meteorological observation, ocean monitoring, and telecommunication service is planned to be launched onto Geostationary Earth Orbit in 2008 according to the Korea national space program. A feasibility study on the solar constraint in the operation of the COMS meteorological imager (MI) is performed using the GOES imager hardware operation characteristics. The Earth observation areas of the MI are introduced and the observation time of the MI observation area is calculated. The sun light can enter into the MI optical system around the local midnight and impinge on the performance of the MI. The solar eclipse viewed from the satellite occurs near local midnight around the equinox. This study discusses the restriction of imaging operation time that should be considered in order to avoid the solar intrusion about local midnight and to keep acceptable image quality for the MI observation areas. This study could be useful to build the operation concept of the MI during the development of the MI.

• Journal of Astronomy and Space Sciences
• /
• v.16 no.2
• /
• pp.199-208
• /
• 1999

In this paper, KOMPSAT satellite launch and deployment operations are discussed. The U.S. Taurus launch vehicle delivers KOMPSAT satellite into the mission orbit directly. Launch and deployment operations is monitored and controlled by several international ground stations including Korean Ground Station (KGS). After separation from launch vehicle, KOMPSAT spacecraft deploys solar array by on-board autonomous stored commands without ground inter-vention and stabilizes the satellite such that solar arrays point to the sun. Autonomous ground communication is designed for KOMPSAT for the early orbit ground contact. KOMPSAT space-craft has capability of handing contingency situation by on-board fault management design to retry deployment sequence.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.495-504
• /
• 2014

Solar sail spacecrafts can gain propulsion using the momentum change through reflecting the photon packets of energy from the Sun. The sail slowly but continuously accelerates to accomplish a wide-range of potential missions. To develop the potential mission of the solar sail, the configuration, the film characteristics and the deployment devices should be carefully considered. In this paper, recent development and activities of the solar sail are introduced and design technology of the sail subsystem is investigated.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.60.1-60.1
• /
• 2021

The Balloon-borne Investigation of Temperature and Speed of Electrons in the corona (BITSE) is a technology demonstration mission launched in 2019 to observe the solar corona from ~3 Rs to 15 Rs at four wavelengths (393.5, 405.0, 398.7, and 423.4 nm). Preliminary analysis shows that BITSE imaged the solar minimum corona with the equatorial streamers on the east and west limbs. The narrow streamers observed by BITSE are in good agreement with the geometric properties obtained by the Solar and Heliospheric Observatory (SOHO) coronagraphs in the overlapping physical domain. In spite of the small signal-to-noise ratio we were able to obtain the temperature and flow speed of the western steamer. In the heliocentric distance range 4 - 7 Rs on the western streamer, we obtained a temperature of ~ 1.0 ± 0.3 MK and a flow speed of ~ 260 km s^-1 with a large uncertainty interval.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.57.4-57.4
• /
• 2019

BITSE is a project of balloon-borne experiments for a next-generation solar coronagraph developed by a collaboration with KASI and NASA. The coronagraph is built to observe the linearly polarized brightness of solar corona with a polarization camera, a filter wheel, and an aperture door. For the observation, the coronagraph is supported by the power distribution unit (PDU), a pointing system WASP (Wallops Arc-Second Pointer), telemetry & telecommand system SIP (Support Instrument Package) which are developed at NASA's Goddard Space Flight Center, Wallops Flight Facility, and Columbia Scientific Balloon Facility. The BITSE Command and Data Handling (C&DH) system used a cost-off-the-shelf electronics to process all data sent and received by the coronagraph, including the support system operation by RS232/422, USB3, Ethernet, and digital and analog signals. The flight software is developed using the core Flight System (cFS) which is a reusable software framework and set of reusable software applications which take advantage of a rich heritage of successful space mission of NASA. The flight software can process encoding and decoding data, control the subsystems, and provide observation autonomy. We developed a python-based testing framework to improve software reliability. The flight software development is one of the crucial contributions of KASI and an important milestone for the next project which is developing a solar coronagraph to be installed at International Space Station.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.2
• /
• pp.244-255
• /
• 1995

The success of a satellites mission is largely depended upon the choice of an appropriate orbit. In the case of a remote sensing satellite which observes the Earth, there exits an optimum solar elevation angle depending on the mission. Therefore a sun-synchronous orbit is suitable for a remote sensing mission. The second-order theory for secular perturbation due to non-symmetric geopotential was described. To design a sun-synchronous orbit, a constraint condition on regression of node was derived. A algorithm to determine the altitude and the inclination was introduced using this constraint condition. As practical examples, the altitudes and the inclinations of four remote sensing satellites were calculated. The ground tracks obtained by the orbit propagator were used to verify the resulting sun-synchronous orbital elements.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.58.2-58.2
• /
• 2019

BITSE is a technology demonstration mission to remotely measure the speed, temperature, and density of the solar wind as it forms as close as 3 Rs. BITSE obtained coronal images during its one day flight above more than 99% of the atmosphere, and calibration data are taken in the laboratory as well as during the flight. As the linearly polarized K-corona is much fainter than other bright sources like diffraction, sky, and F-corona, a careful data reduction is required to obtain reliable scientific results. We will report status of the obtained data, the reduction progress, and future plan.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.79.3-79.3
• /
• 2021

The Korea Astronomy and Space Science Institute (KASI) has been developing a diagnostic coronagraph to be deployed in 2023 on the International Space Station (ISS) in collaboration with the NASA Goddard Space Flight Center (GSFC). The mission is known as "Coronal Diagnostic Experiment (CODEX)", which is designed to obtain simultaneous measurements of the electron density, temperature, and velocity using multiple filters in the 2.5-10 Rs range. The coronagraph will be installed and operated on the ISS to understand the physical conditions in the solar wind acceleration region, and to enable and validate the next generation space weather models. In this presentation, we will introduce recent progress and future plan.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.463-472
• /
• 2005

In this paper, the dynamic model development for interplanetary navigation has been discussed. The Cowell method for special perturbation theories was employed to develop an interplanetary trajectory propagator including the perturbations due to geopotential, the Earth's dynamic polar motion, the gravity of the Sun, the Moon and the other planets in the solar system, the relativistic effect of the Sun, solar radiation pressure, and atmospheric drag. The equations of motion in dynamic model were numerically integrated using Adams-Cowell 11th order predictor-corrector method. To compare the influences of each perturbation, trajectory propagation was performed using initial transfer orbit elements of the Mars Express mission launched in 2003, because it can be the criterion to choose proper perturbation models for navigation upon required accuracy. To investigate the performance of dynamic model developed, it was tested whether the spacecraft can reach the Mars. The interplanetary navigation tool developed in this study demonstrated the spacecraft entering the Mars SOI(Sphere of Influence) and its velocity .elative to the Mars was less than the escape velocity of the Mars, hence, the spacecraft can arrive at the target planet. The obtained results were also verified by using the AGI Satellite Tool Kit. It is concluded that the developed program is suitable for supporting interplanetary spacecraft mission for a future Korean Mars mission.