• 한국기계가공학회지
• /
• 제18권12호
• /
• pp.82-90
• /
• 2019

This analysis demonstrates the effective removal of heat generated from a solar panel's output degradation factor solar cells (the solar panel's output deterioration factor), and solves the problems of oxidation and corrosion in existing metal heat sinks. The heat-dissipating test specimen was prepared using carbon materials; then, its thermal conductivity and its effectiveness in reducing temperatures were studied using heat transfer numerical analysis. As a result, the test specimen of the 30g/㎡ basis weight containing 80% of carbon fiber impregnated with carbon ink showed the highest thermal conductivity 6.96 W/(m K). This is because the surface that directly contacted the solar panel had almost no pores, and the conduction of heat to the panels appeared to be active. In addition, a large surface area was exposed to the atmosphere, which is considered advantageous in heat dissipation. Finally, numerical analysis confirmed the temperature reduction effectiveness of 2.18℃ in a solar panel and 1.08℃ in a solar cell, depending on the application of heat dissipating materials.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.273-278
• /
• 2009

The experimental study is performed to investigate the optimum design of the system dissipating properly heat from the in-situ solar panel installed on site. For this purpose, six 12-Watts panels, which are set at the different conditions of the solar panels contained phase change material, changing the array of the aluminum fin and honeycomb at the back of the panel, are tested. PCM, which has $44^{\circ}C$ melting point, is chosen in this study. In order to enhance the thermal heat from the absorbed heat in PCM, finned aluminum plate is placed. Furthermore, Aluminum honeycomb is imbedded in the back container to find if it would improve the thermal conductivity of PCM. As a result, the solar panel, which is combined with honeycomb and outward fins with PCM instead of placing the fine inward, is showing the best performance in terms of controling panel temperature and efficiency.

• 한국컴퓨터정보학회논문지
• /
• 제21권1호
• /
• pp.101-105
• /
• 2016

After a weight-rate disposal system for food waste has been implemented we have to install the food waste system at all apartment. In this paper, we supplied electric energy to the food waste system using solar heat panels. The weight of the food waste is displayed on the LCD panel, and its price is calculated based on its weight. Since there would be some cases that touch-typed card can't be well recognized if it is contaminated by foreign material, we designed a recognition device by no-touch sensitive card reader to embody the food waste system. The food waste system was designed using a GUI(graphical user interface) so that users can easily understand it.

• 태양에너지
• /
• 제9권1호
• /
• pp.30-35
• /
• 1989

This paper dealt with an experiments on temperature vairation in the heat storage zone due to change of vertical location (height) of sink diffuser and flow extraction in small saltless solar pond ($0.5{\times}0.5{\times}1.0M$), and the honeycomb device for this experimental purpose consisted of one-tired, sealed, and air filled by honeycomb panels. As results of experiments, 1) The storage zone was formed under lower region below the honeycomb device. 2) The higher vertical location of sink diffuser was placed, the more mixing phenomenon increased in the pond at steady flow extraction. 3) The more flow extraction increased, the more mixing phenomenon decreased at constant heat exchanger and variable flow extraction.

• 한국태양에너지학회 논문집
• /
• 제21권2호
• /
• pp.1-8
• /
• 2001

The most effective methods for utilizing solar energy are to use the sunlight and solar thermal energy such as hybrid panel simultaneously and to use concentrator. From such a view point systems using various kinds of photovoltaic panels are constructed in the world. However, there has not been a hybrid panel with a concentrator. If the sunlight is concentrated on solar cell, cell conversion efficiency increases and the temperature of the solar cell s increases. As the temperature of the solar cells increases, the cell conversion efficiency gradually decreases. For maintaining the cell conversion efficiency constant, it is necessary to keep solar cell at low temperature. In this paper, after designing a concentration rate for concentrating, we propose a model for cooling the cell and for using wasted heat. And, we compare it with conventional panels after calculating the electrical and thermal efficiency, using the energy balance equation.

• 태양에너지
• /
• 제12권1호
• /
• pp.59-71
• /
• 1992

본 연구는 주거용건물에서의 난방용에너지 소비량절감 및 실내환경의 쾌적도 향상을 목적으로, 잠열재 용기의 축열 및 방열특성을 파악한 후, 잠열저장패널을 이용한 바닥난방공간의 실내온도분포를 분석하였다. 잠열저장패널의 특성을 구명하기 위해서는 패널의 가열시간에 따른 잠열재의 융해 및 응고특성에 대해 실험 분석하고 실험건물을 이용하여 잠열저장패널을 설치한 실내공간의 온도분포에 대해 실험 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.463-466
• /
• 2001

The most effective methods of utilizing solar energy are to use the sunlight and solar thermal energy such as hybrid panel simultaneously and to use concentrator. From such a view point, systems using various kinds of photovoltaic panels were constructed in the world. However there have not been a type of panel using concentrator and hybrid simultaneously. If the sunlight are concentrated on the solar cell, cell conversion efficiency increase and the temperature of the solar cells increases. As the temperature of the solar cells increases, so cell conversion efficiency decreases. Therefore, for maintaining cell conversion efficiency at these conditions, it is necessary to keep the cell at low temperature. In this paper, after designing a concentrate rate for concentrating, we proposed model for cooling cell and using waste heat, and we compared with conventional panels after calculating the electrical and thermal efficiency using energy balance equation.

• 패션비즈니스
• /
• 제19권4호
• /
• pp.92-108
• /
• 2015

This study aimed at developing a down jacket prototype that utilized sunlight as an alternative energy source with no air pollution. The jacket is filled with flexible solar panels and has a heat-generating function and LED function. In this study, three smart down jacket prototypes were developed, and the jacket's capabilities were demonstrated through the thermal effect on the performance test. The typical output voltage of the flexible solar panels was 6.4V. By connecting the 2 solar cell modules in series, the final output voltage was 12.8V. A battery charge regulator module was used the KA 7809 (TO-220) of 9V. Three heating pads were to be inserted into the belly of the jacket as direct thermal heating elements, and the LED module was configured, separated by a flash and an indicator. The smart down jacket was designed to prevent damage to the down pack without the individual devices' interfering with the human body's motion. Because this study provides insulation from extreme cold with a purpose, the jacket was tested for heat insulation properties of non-heating, heating on the back, heating on the abdomen, and heating on both the back and abdomen in a sitting posture in a static state. Thermal property analysis results from examining the average skin temperature, core temperature, and the temperature and humidity within clothing showed, that placing a heating element in one place was more effective than distributing the heating elements in different locations. Heating on the back was the most effective for maintaining optimal skin temperature, core temperature, and humidity, whereas heating on the abdomen was not effective for maintaining optimal skin temperature, core temperature, or humidity within clothing because of the gap between the jacket and the body.

• 자원리싸이클링
• /
• 제31권5호
• /
• pp.52-58
• /
• 2022

태양광 폐실리콘 웨이퍼에서 회수한 실리콘과 카본블랙을 활용하여 탄화규소 분말을 제조하였다. 태양광 발전시장에서 결정질 실리콘 모듈이 90% 이상을 차지한다. 태양광 모듈의 사용기한이 도래함에 따라 환경과 경제적인 측면에서 실리콘을 회수하고 활용하는 기술은 매우 중요하다. 본 연구에서는 태양광 폐패널에서 회수한 실리콘을 탄화규소 원료로 활용하기 위하여, 순도 95.74% 폐실리콘 웨이퍼로부터 정제과정을 거쳐 99.99% 실리콘 분말을 회수하였다. 탄화규소 분말 합성특성을 살펴보기 위하여, 정제된 99.99% 실리콘 분말과 탄소분말을 혼합한 후, Ar 분위기에서 열처리(1,300℃, 1,400℃, 1,500℃)과정을 수행하였다. 실리콘과 탄화규소 분말의 특성을 입도분포, XRD, SEM, ICP, FT-IR 및 Raman 분석기를 사용하여 분석하였다.

• 태양에너지
• /
• 제10권3호
• /
• pp.13-18
• /
• 1990

표면 온도가 균일하지 않은 원통을 균속도 유동장에 가로 놓았을 경우, 표면에서의 열전달 특성은 표면이 등온이거나 일정한 heat flux가 주어졌을 때와는 판이하게 다르다. 본 연구에서는 공기의 균속도 유동장내에서 두가지 경우(step형 및 선형변화)의 비등은 경제조건이 원통면을 따라 원주방향으로 주어졌을 때 표면에서의 열전달 특성을 고찰하였다. Step형 변화는 원통형 태양로의 표면에서 관찰될 수 있다. Solar One(Califomia주의 Barstow시에 있는 태양로)의 경우, 작동유체(물)는 표면을 따라 원주방향과 수직으로 설치된 튜브를 따라 흐르면서 액체상태로부터 고온고압의 증기로 변한다. 이 과정에서 태양로 표면의 receiver panel은 그 위치에 따라, preheater, boiler, 그리고 superheater의 역할을 수행하며 표면의 온도도 균일하지 않은 분포를 나타낸다. 이와 같은 경우 표면의 평균 온도를 가지고 대류에 의한 열 손실을 계산하면 큰 오류를 범할 가능성이 있다.