• 한국지리정보학회지
• /
• 제18권4호
• /
• pp.1-13
• /
• 2015

우리나라 뿐만 아니라 전 세계적으로 온실가스를 줄이기 위해 신재생에너지에 대한 관심이 많다. 현재 우리나라에서는 신재생 에너지 중 태양광 발전소의 전기 생산 비율이 가장 높으며, 지금도 태양광 발전소가 많이 설치되고 있다. 하지만 국내의 경우 태양광 기술은 발전하고 있지만, 태양광 발전소의 입지 선정에 대한 연구가 아직 부족하여 여러 가지 문제가 발견되고 있으며 발전된 기술을 제대로 활용하지 못하는 문제도 발생하고 있다. 또한, 무분별한 발전소의 설치로 인해 자연훼손도 심각하다. 본 연구에서는 태양광 발전소의 입지조건을 사회, 문화, 경제적 등 다방면의 인자들을 고려하고, 다양한 인자들을 이용하여 시각화 및 데이터화를 시킨 후 계층분석법을 통한 가중치를 부여하여 태양광 발전소 입지 분석을 하였다. 이렇게 여러 인자의 영향을 고려했기 때문에 태양광 발전소의 설치로 인한 문제들을 방지할 수 있고, 태양광의 발전된 기술을 최대한 활용할 수 있으며, 현재 설치가 진행 중인 발전소 뿐만 아니라 기존 잘못된 입지들에 대한 대책 마련에 도움이 될 것이라고 기대한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.136.1-136.1
• /
• 2011

An energy modeling analysis method currently has been considered as a new approach for energy policy research, because the importance of renewable energy use has been emphasized more and more. This study used RETScreen model as a clean energy decision making methodology for adaptation to climate change and elimination of various pollutions. This modeling method includes five step standard analysis; energy model, cost analysis, GHG analysis, financial analysis, and sensitivity & risk analysis and it also assesses both conventional and modern energy sources and technologies. This methodology for the photovoltaic(PV) energy modeling is used to evaluate the energy production, financial performance and GHG emissions reduction of photovoltaic projects. In addition, the PV application systems are classified into three basic applications; On-grid system, Off-grid system and water pumping system. This study assesses the renewable energy techno-economic modeling method with the feasibility analysis result of 10 MW PV power plant in Abu Dhabi in United Arab Emirates. Furthermore this study stresses the importance of renewable energy model research by applying to domestic PV power plant which is now in preparation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.38.1-38.1
• /
• 2010

The trend to thinner crystalline silicon solar wafers in production of solar cells investigates re-evolution of back surface field (BSF) formation. We have studied mechanisms of back contact formation in Al evaporation and screen printed Al paste for Si solar cells by TEM analysis. We observed that Si diffuse into Al during heat up. The Si diffusion process made vacancies in Si wafer. The Al began to seep into the Si wafer (Al spike). During heat down, the Al spike were shrink which causes the doped region (BSF).

• 동굴
• /
• 제95호
• /
• pp.15-21
• /
• 2009

온실가스와 지구촌 온난화, 그리고 이를 치유하기 위한 인간의 노력과 필요한 대안기술은 마치 성난 자연을 잠재우기 위한 노력과 그에 필요한 재원을 동원하기보다도 더 어려운 일인가보다. 한정된 화석연료는 수십 년 내에 고갈될 수밖에 없으며, 국제무대에서 나라마다 자원을 확보하려는 외교활동의 치열함은 마치 자원 확보를 위한 전쟁을 방불케 하는 모습이다. 화석연료의 고갈은 친환경 녹색성장이라는 새로운 대안정책을 불러왔고, 태양에너지 활용을 위한 태양전지기술은 날로 발전을 거듭하고 있으며, 이와 함께 세상을 밝혀주기 위한 조명광기술은 석유등, 백열등으로부터 발광다이오드에 이르러 첨단 광역시장을 이루었다. 따라서 이들을 탄생시킨 반도체기술로부터 태양전지와 발광다이오드를 접목시켜 일체화시킨 SOLAR-LED 시스템과 함께 저탄소녹색조명의 동굴응용 기술을 조명한다.

• 한국수소및신에너지학회논문집
• /
• 제24권6호
• /
• pp.558-565
• /
• 2013

This paper presents how to determine AEP(Annual Energy Production) by a small wind turbine in DuckjeokDo island. Evaluation of AEP is introduced to make a self-contained island including renewable energy sources of wind, solar, and tidal energy. To determine the AEP in DuckjeokDo island, a local wind data is analyzed using the annual wind data from Korea Institute of Energy Research firstly. After the wind data is separated in 12-direction, a mean wind speed at each direction is determined. And then, a small wind turbine power curve is selected by introducing the capacity of a small wind turbine and the energy production of the wind turbine according to each wind direction. Finally, total annual wind energy production for each small wind turbine can be evaluated using the local wind density and local energy production considering a mechanical energy loss. Throughout the analytic study, it is found that the AEP of DuckjeokDo island is about 2.02MWh/y and 3.47MWh/y per a 1kW small wind turbine installed at the altitude of 10 m and 21m, respectively.

• 한국태양에너지학회 논문집
• /
• 제36권1호
• /
• pp.49-61
• /
• 2016

The power production using hub height wind speed tends to be overestimated than actual power production. It is because the hub height wind speed cannot represent vertical wind shear and blade tip loss that aerodynamics characteristic on the wind turbine. The commercial CFD model WindSim is used to compare and analyze each power production. A classification of atmospheric stability is accomplished by Monin-Obukhov length. The concentric wind speed constantly represents low value than horizontal equivalent wind speed or hub height wind speed, and also relevant to power production. The difference between hub height wind speed and concentric equivalent wind speed is higher in nighttime than daytime. Under the strongly convective state, power production is lower than under the stable state, especially using the concentric equivalent wind speed. Using the concentric equivalent wind speed considering vertical wind shear and blade tip loss is well estimated to decide suitable area for constructing wind farm.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.75-82
• /
• 2012

This study aims to investigate the usage of the renewable energy systems installed in buildings and make suggestions for the effective management. In this regard, a questionnaire survey was conducted on 1)design and construction, 2) operation and management, 3) user satisfaction and improvements about the renewable energy systems in buildings. Findings from this study can be summarized as follows; a lack of the basic information about systems, non-use of energy management systems, the differences in the features by energy source, and a lack of expertise of managers. The requirements to resolved these problems include the integrated management of various electric heat sources including a renewable energy source, an operation schedule based on the prediction of production and consumption, and so on. Furthermore the necessity of multiplex energy sources management system was confirmed and the basic data needed to establish the targets of this system were obtained.

• 한국태양에너지학회 논문집
• /
• 제36권3호
• /
• pp.53-61
• /
• 2016

Solar assisted heat pump system uses solar thermal energy as a heat source of evaporator of heat pump. So, COP can be enhanced as well as collector efficiency. For improving performance of this system, some research about hybrid solar collector that has fin-and-tube heat exchanger has been conducted. This collector can get a thermal energy from ambient air for liquid heating, so heated liquid can be used as a heat source of evaporator in heat pump even the solar radiation is not enough. In this study, numerical analysis was conducted for confirming heat gain of liquid according to fin height and pitch of fin-and-tube heat exchanger in collector. As a result, higher heat gain was obtained on lower fin height and narrow fin pitch, but the pressure drop also increased with increment of heat gain. Thus the JF factor considering both heat transfer enhancement and pressure drop was investigated and the maximum value was shown when the fin height and pitch were 40mm and 45mm. So it is considered that this installation condition has a highest heat transfer improvement when comparing with pressure drop. However heat gain of liquid at this condition was less than the other installation conditions of fin pitch on same height. Then, after establishing a proper minimum heat gain of liquid, actual production and experiment of collector will be conducted with fin height and pitch showing maximum JF factor and satisfying selected minimum heat gain of liquid on the basis of results of this study.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.547-553
• /
• 2024

Hydrogen is considered a key energy source to achieve carbon neutrality through the global goal of 'Net Zero'. Due to limitations in domestic green hydrogen production, Korean companies are interested in importing green hydrogen produced overseas. Because Australia and the Middle East possess high-quality renewable energy resources, they are attracting attention as suitable regions for producing green hydrogen using renewable energy. The cost of constructing and operating a green ammonia plant varies depending on the region. In this study, an economic feasibility comparison of green ammonia plant construction in Australia and the Middle East is conducted. Through this, it is expected to contribute to the economic analysis and feasibility analysis of the project to import hydrogen in the form of green ammonia into Korea.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.229-229
• /
• 2007