• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.99-107
• /
• 1997

In this study, a series of batch-scale tests were conducted to optimize the design parameters for the application of soil washing techniques to the hydrophobic organic compounds(HOCs)-contaminated soil and to find the effective methods for the recovery of surfactants from washing effluent by using solvent. Several nonionic surfactants (polyoxyethylene oleyl ester) and sophorolipid were applied to the artificially contaminated soil (4,000 mg n-dodecane/kg dry soil). The effects of washing time, concentration of surfactant solution, dilution ratio, and temperature on washing efficiencies were examined. Hydrophile-liphophile balance (HLB) number was proven to be one of the important parameters for soil washing. The HLB numbers of OA-5 and sophorolipid are too low to form a stable soil-water emulsion. They showed very low washing efficiencies less than 10e1o. If HLB number is in the proper range to form a stable soil-water emulsion, surfactant having higher solubility for HOCs shows higher washing efficiency. OA-14 having higher HLB number than OA-9 formed more stable soil-water emulsion. But its washing efficiency was about 20% due to a lower molar solubility ratio (MSR) than OA-9. OA-9, which forms a stable soil-water emulsion and has comparatively high sotubility for HOCs, showed about 60% washing efficiency by itself. To recover anthracene effectively from OA-9 washing effluent by using benzene as an organic solvent, desirable temperature and pH were $30^{\circ}C$ and 2, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.716-719
• /
• 2001

The mobilization and biodegradation of phenanthrene in soil was enhanced by using paraffin oil, which was stabilized by the addition of a surfactant (Brji 30). The ratio of paraffin oil/Brij 30 was determined by measuring the change in the critical micelle concentration. When only surfactant was used, the stabilized paraffin oil emulsion could dissolve more phenanthrene in the water phase. Column experiment showed increased phenanthrene mobilization from the contaminated soil. The phenanthrene mobilized in the paraffine oil/Brij 30 emulsion was biodegraded faster than that in water phase or surfactant solution. This result indicates that a paraffin oil/surfactant system can be effectively used for the removal of PAH from contaminated soil.

• The Korean Journal of Pesticide Science
• /
• v.12 no.4
• /
• pp.315-322
• /
• 2008

In this study, a simple, effective, and sensitive method has been developed for the quantitative residue analysis of cyhalofop-butyl and its metabolite cyhalofop acid in water and soil when kept under laboratory conditions. The content of cyholofop-butyl and cyhalofop acid in water and soil was analyzed by first purifying the compounds through liquid-liquid extraction and partitioning followed by Silica gel (adsorption) chromatography. Upon the completion of the purification step the residual levels were monitored through high-performance liquid chromatography (HPLC) using a UV absorbance detector. The recoveries of cyhalofop-butyl from three replicates spiked at two different concentrations ranged from 82.5 to 100.0% and from 66.7 to 97.9% in water and soil, respectively. The limit of detection and minimum detection level of cyhalofop-butyl in water and soil was 0.02 ppm and 10 ng, respectively. The recoveries of cyhalofop acid ranged from 80.7 to 104.8% in water and from 76.9 to 98.1 % in soil. The limit of detection of cyhalofop acid was 0.005 ppm in water and 0.01 ppm in soil, while the minimum detection level was 2 ng both in water and soil. The half-live of cyhalofop-butyl was 4.14 and 6.6 days in water and soil, respectively. The method was successfully applied to evaluate cyhalofop-butyl residues in water and soil applied aj. 30% emulsion, oil in water (EW) product.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.02a
• /
• pp.14-28
• /
• 2001

As basic study for purpose bioremedation in oil-contaminated environment, Primarily, we isolated biosurfactant producer- strains utilized of oil-agar plate, and measured surface tension and emulsifying activity. We investigated in oil-contaminated soil and sea water. In this laboratory, Pseudomonas sp. EL-012S strain isolated from oil-contaminated soil was able to product novel biosurfactant under the optimal culture condition. Its condition was n-hexadecane 2.0%, NH$_4$NO$_3$0.4%, Na$_2$HPO$_4$0.6%, KH$_2$PO$_4$0.4%, MgSO$_4$.7$H_2O$ 0.02%, CaCl$_2$.2$H_2O$ 0.001%, FeSO.7$H_2O$ 0.001%, initial pH 7.0 and aeration at 3$0^{\circ}C$, respectively. This biosurfactant was produced in both late-exponential and early-stationary phase. The biosurfactant from Pseudomonas sp. EL-012S was composed of carbohydrate, lipid and protein. The purified-biosurfactant was examined two (biosurfactant type I, II) with the silica gel G60 column chromatography and the purified biosurfactant confirmed thin layer chromatography, high performed liquid chromatography and gas chromatography. The biosurfactant type I involved in carbohydrate-lipid-protein characteristics lowered surface tension of water to 27dyne/cm and interfacial tension 4.5dyne/cm aginst to n-hexadecane and the biosurfactant type B involved in carbohydrate lipid characteristics lowered surface tension of water to 30dyne/cm and interfacial tension 8dyne/cm against to n-hexadecane. Specially type I had the properties such as strong emulsifying activity, emulsion stability, pH-stability, thermo-stability, high cleaning activity and forming ability.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.601-607
• /
• 2024

The discharge of oily wastewater into water bodies and soil poses a serious hazard to the environment and public health. Various conventional techniques have been employed to treat oil-water mixtures and emulsions; Unfortunately, these approaches are frequently expensive, time-consuming, and unsatisfactory outcomes. Porous materials and adsorbents are commonly used for purification, but their use is limited by low separation efficiencies and the risk of secondary contamination. Recent advancements in nanotechnology have driven the development of innovative materials and technologies for oil-contaminated wastewater treatment. Nanomaterials can offer enhanced oil-water separation properties due to their high surface area and tunable surface chemistry. The fabrication of nanofiber membranes with precise pore sizes and surface properties can further improve separation efficiency. Notably, novel technologies have emerged utilizing nanomaterials with special surface wetting properties, such as superhydrophobicity, to selectively separate oil from oil-water mixtures or emulsions. These special wetting surfaces are promising for high-efficiency oil separation in emulsions and allow the use of materials with relatively large pores, enhancing throughput and separation efficiency. In this study, we introduce a facile and scalable method for fabrication of superhydrophobic-superoleophilic felt fabrics for oil/water mixture and emulsion separation. AlN nanopowders are hydrolyzed to create the desired microstructures, which firmly adhere to the fabric surface without the need for a binder resin, enabling specialized wetting properties. This approach is applicable regardless of the material's size and shape, enabling efficient separation of oil and water from oil-water mixtures and emulsions. The oil-water separation materials proposed in this study exhibit low cost, high scalability, and efficiency, demonstrating their potential for broad industrial applications.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.249-255
• /
• 1995

This study was conducted to investigate the effects of some soil conditioners, such as polyacrylamide(PAM), polyvinylalcohol(PVA) and Bitumen emulsion, on aggregate formation and stability, wetting angle, sorptivity and penetrability of the soil with different textures : sand, sandy loam, loam and clay loam. A pot experiment was carried out to find out the effect of treatment on the germination and growth of lettuce with three textures : sand, sandy loam and silt loam. Soil aggregates larger than 2mm in untreated soils at dry condition were naught in sand, 45% in sandy loam, 80% in loam and 90% in clay loam. Treatments of soil conditioners tended to increase the occurrence of soil aggregate larger than 2mm, which were 20~25% in sand, 55~75% sandy loam, but not affected greatly aggragate occurence in loam and clay loam. The aggregate instability was decreased by the soil conditioner treatment. The wetting angles of the soils were greatly changed by hydrophobic of Bitumen, but those were changed slightly by PVA and PAM application. The sorptivity and penetrability data indicated that the effects of different materials on these parameters differed depending upon soil texture. Application of PVA and PAM were no effect exceptive in sand. Application of Bitumen revealed that water movement was not showed in all soils. The germination rate, root weight and top plant weight of lettuce were increased in all soils by PAM treatment as compared to untreated soils. Particularly the greater effect was occurred in sand soil than in sandy loam and silt loam. PAM increased greatly the moisture content and air phase of soils.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.5
• /
• pp.716-723
• /
• 2006

A biosurfactant-producing bacterial strain was selected from oil-contaminated soil because of its ability to degrade crude oil and tributyrin $(C_{4:0})$. The strain was identified as Bacillus subtilis A8-8 based on its morphological, biochemical, and physiological characteristics. When B. subtilis A8-8 was grown with crude oil as the sole carbon source, the biosurfactant from the strain emulsified crude oil, vegetable oil, and hydrocarbons. Soybean oil was the optimum substrate for the emulsifying activity and emulsion stability of the biosurfactant, both of which were superior to those of several commercially available surfactants. The biosurfactant was purified by a procedure including HCl precipitation, methanol treatment, and silica-gel chromatography. The partially purified biosurfactant was analyzed by TLC (thin-layer chromatography), SDS-PAGE, and HPLC and it reduced the surface tension of water from 72 mN/m to 26 mN/m at a concentration of 30 mg/l. Therefore, the purified lipopeptide biosurfactant has strong properties as an emulsifying agent and acts as an emulsion-stabilizing agent.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.8
• /
• pp.25-32
• /
• 2010

Contamination of soil and groundwater by the compounds of hydrocarbon petroleum has been widely accepted as the main cause that harms the environments and health. To remove those pollutants, absorbing clothes, activated carbons, or oil-water separation devices with the gravity method are employed for treatment. However, those materials and devices cannot remove the emulsion pollutants despite of their efficiency for removing free products. Therefore, we investigated the problems which occur during the groundwater treatment for the highly concentrated suspended solid particles, which can be resulted from excavation, and to propose methods to remove TPH(Total Petroleum Hydrocarbon). After coagulation experiment with high molecular polymers, the concentration of SS(Suspended Solids) and COD(Chemical Oxygen Demand) turned to satisfy the groundwater quality criteria within 5 minutes while the concentration of TPH failed to meet the water quality standard of effluent. Consequently, the water quality criteria for effluent could not be met by single DAF(Dissolved Air Flotation) process. However all water quality criteria could be satisfied after 20 minutes when coagulation reactions are carried out simultaneously in the DAF reactor.

• Clean Technology
• /
• v.18 no.2
• /
• pp.170-176
• /
• 2012

A series of acrylic copolymers containing perfluoroalkyl acrylate were synthesized by 2-step emulsion polymerization of variety of acrylate monomers (ethyl acrylate, butyl acrylate or methyl methacrylate) with perfluoroalkyl ethyl acrylate (PFA) and glycidyl methacrylate (GMA) monomers. This study focused on effects of monomer compositions (the kind of acrylate monomer, contents of PFA and GMA) and composition of surfactants [(sodium dodecyl sulphate/nonylphenol 10mole ethoxylate (NP-10)] and initiator content on the contact angles and surface free energy. It was found that the copolymer having an optimum composition (BA : 87 wt%, GMA : 8.7 wt% and PFA : 4.3 wt%) was shown to be quite surface active [surface free energy : 19.89 mN/m and contact angles : $103.5^{\circ}$ (water) and $78.7^{\circ}$ (methylene iodide)] in the solid state. This result suggests that the optimal copolymer containing fluorinated monomer synthesized in this study have high potential as a low surface energy material, which may have high oil- and water-repellent surface and have been proposed as acrylic syntan for leather and also as soil-resistant/oil and water repellent coating for textiles and wood etc.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.147-157
• /
• 1973

I. The effect of excessive soil moisture(at the time of germination) on germination of barley and crop damage of herbicides was investigated. Machete(Butachlor) and TOK(Nitrofen) were treated, respectively, at the rate of 150g ai/10a on each pot whose different soil moisture content was controlled by suppling 30, 40, 50 and 60ml of water per 100gr of air-dried soil, respectively. The results are summarized as follows: 1. Excessive soil moisture beyond field moisture capacity caused great inhibition, from 20 to 100%, of the germination of barley even at untreated pots(check pots). Also, further development of root and growth of barley were greatly inhibited even though the seeds germinated. 2. The same tendency in inhibition of germination and growth as at untreated pots was observed at treated pots, too. As a whole, however, the damage were heavier at treated pots. II. Wanju naked spring barley was seeded on four different soils and covered with soil to a depth of 1 em, and then Machete, TOK, Saturn and HE-314 were treated at the rate of 180, 150 and 200, 150, and 250g ai/10a, respectively, and the effect of soil texture on crop damage of the herbicides was investigated. The results are summarized as follows: 1. Machete(emulsion and granule, at 180g ai/10a) The degree of crop damage was quite different from one soil texture to another: while almost no crop damage was observed on a clay loam soil regardless of the type of formulation, the damage became heavier as the soil texture became sandier as sandy clay loam, volcanic ash loam and sandy loam, and great inhibition of growth was observed on sandy loam soil. In general heavier damage was caused by the application of emulsion than by granular formulation. 2. TOK(Wettable powder, at 150, 250g ai/l0a) Almost the same tendency as in the application of Machete was observed, and the damage became heavier as the application rate increased. 3. Saturn(at l50g ai/l0a) No great difference in crop damage among soil textures was observed. 4. HE-3l4(at 250g ai/l0a) Almost no difference in crop damage among soil textures was observed at this rate of 250g ai/l0a. III. To study a difference of crop damage on soil covering depth(4 levels), 9 herbicides(TOK, MO, HE-3l4, Machete, Saturn, Simetryne, Simazine, Gesaran, Lorox) were treated on the pots with two different soils, and the effect of soil covering depth on crop damage of the herbicides was investigated. The results obtained in this experiment are summarized as follows: Light Clay Soil 1. The growth of barley in relation to depth of soil covering at check pots followed the order vigorous to weak; lcm>1.5cm>0.5cm>0cm. And in case of 0 and 0.5cm covering the growth of barley was very poor. 2. The damage at 0 and 0.5cm covering at treated pots was very severe, but Saturn, Machete, MO and TOK at 100 to l50g ai/l0a, respectively and He-3l4 at 250 to 375g ai/l0a were relatively safe to barley at the depths of lcm and above. 3. Simazine, Lorox and Simetryne caused slight damage even at 1.5cm covering. Sandy Loam Soil The growth of barley in relation to depth of soil covering at untreated pots followed the order, from vigorous to weak; 1.5cm 0.5cm 3cm 5cm. While MO was safe to barley at 1.5cm covering, for other chemicals more than 3cm covering was require for safe use. Machete and Saturn at 100g ai/l0a, and HE-3l4 at 250g ai/l0a was relatively safe at more than 3cm covering. Simazine, Lorox, Simetryne and Gesaran were unsafe on sandy soil regardless of covering depth.