• 환경영향평가
• /
• 제21권1호
• /
• pp.81-91
• /
• 2012

In this study, it is grasped the status of nutrients through an investigation of release characteristics and physicochemical properties of sediments on reservoir. And then the effect of sediments is evaluated on the water quality in reservoir. In the results of physicochemical analysis, the pollution level of midstream is the highest, which shows the traits that the water is more deeper and takes place a deposition consistently. Then, the pollution level of upstream is higher than downstream's because inflow has influence on the upstream directly. The downstream is located near tidal gate so that the soil particles can be moved easily and are difficult to be deposited due to the distribution of seawater by control of tidal gate. Therefore, the downstream is showed the lowest pollution level than the others. Also, the concentration of SOD(Sediment Oxygen Demand) in the upstream which is influenced on the effect of inflow is highest than the others. When it analyzes under anaerobic and aerobic condition to understand the release characteristic of sediment, it shows that the release rate is low or negative under the aerobic condition. Whereas the release rate is usually positive under the unaerobic condition relatively. According to these results, it is necessary to maintain the proper environmental factors of water body for decreasing the release rate of sediment. Because the release rate is changeable under the different condition of water body. Therefore, proper strategies are required for increasing the self-purification of water as well as keeping the aerobic condition of sediment and managing a sediment layer directly to control the inner-pollution by the sediment of reservoir.

• 한국지리정보학회지
• /
• 제12권2호
• /
• pp.82-98
• /
• 2009

본 연구에서는 용담댐 상류의 동향과 천천 유역을 대상으로 고탁수 발생에 영향을 주는 부유사량을 분석하기 위해 SWAT 모델을 적용하였다. DEM, 토지피복도, 토양도와 같은 GIS 자료 및 기상자료 등을 SWAT 모델의 입력자료로 활용하였으며 동향과 천천 수위국의 수위-유량 곡선식과 유량-유사량 곡선식을 관측자료로 이용하였다. 유량 분석 결과, 동향 지점의 결정계수($R^2$)와 모델효율성지수(EI)는 0.87과 0.87로 나타났으며, 천천 지점의 $R^2$과 EI는 모두 0.95로 높게 나타났다. 또한 유사량 평가에서는 동향지점의 $R^2$과 EI는 0.77과 0.76으로 나타났으며, 천천 지점의 $R^2$과 EI는 0.86과 0.80으로 높게 나타났다. SWAT 모델을 이용시 2003년의 부유사량이 강우량 및 강우강도의 영향으로 가장 높은 결과를 나타낸 것으로 판단된다. 본 연구에서 모의된 부유사량 분석결과는 저수지 관리를 위한 토양침식 가능성 및 탁수발생 잠재성을 평가하기 위한 의사결정지원 자료로 활용될 수 있을 것이다.

• 한국수자원학회논문집
• /
• 제44권11호
• /
• pp.863-873
• /
• 2011

전세계적으로 토사유출은 심각한 문제로 알려져 있다. 환경관리자, 농부 및 다른 토지소유자들을 위해 다양한 모델링 테크닉이 개발되어왔고, 토양유실 저감을 위해 다양한 site-specific 최적관리기법의 효율을 산정하여 활용하였다. 물리적기반인 WEPP 모형은 시 공간적으로 작은 유역과 필지에서 발생하는 토양유실을 산정할 수 있다. 그러므로 본 연구에서는 WEPP watershed version을 이용하여 강원도 홍천군 자운리에 위치한 연구지역에 빗물 우회수로와 식생수로를 적용하였다. 우회수로 적용시 유출량과 토사유출량은 각각5.8%, 29.6% 저감되었으며, 식생수로 적용시 각각 9.8%, 14.5% 저감되었다. 식생수로와 우회수로를 혼합한 식생우회수로는 유출량과 토사유출량이 각각 11.8%, 40.4% 저감되었다. 본 연구의 결과와 같이 WEPP 모형은 유출량과 토사유출량 저감효과를 산정하고, site-specific 토사유출저감 최적관리기법 수립에 유용할 것으로 판단된다.

• 한국방재학회 논문집
• /
• 제10권3호
• /
• pp.133-145
• /
• 2010

본 연구에서는 강우에 기인하는 산사태에 의한 토사발생특성을 분석하였다. 이를 위해 1차원 불포화 지하수해석을 수행하여 강우에 따른 토양수분의 거동을 추정하였으며, 무한사면해석법을 이용하여 토양수분상태에 따른 유역단위 사면안정해석을 수행하였다. 사면안정해석에는 산사태의 발생 및 파괴깊이에 영향을 주는 토양심 및 여러 식생인자들을 함께 고려하였다. 파괴사면의 회복기간을 고려하여 연별토사발생량을 계산한 결과, 1963, 1970, 2002년에 유역 내에서 많은 양의 토사가 발생하였음을 알 수 있었다. 위성영상을 이용한 모의결과의 검증결과, 분석에 사용한 매개변수의 불확실성에 기인하여 위성영상과 모형을 이용한 결과에서 나타나는 산사태 발생위치에는 다소 차이를 보이는 것을 알 수 있었다. 하지만, 오봉댐유역을 왕산천과 도마천 유역으로 구분하는 경우, 이 둘 소유역 단위의 결과는 약 20% 전후의 오차를 가지는 것을 알 수 있었고, 전체유역에 대하여 비교하면 약 4%의 오차만을 가지는 것을 확인할 수 있었다. 위성영상을 이용한 토지피복분류과정상의 오차, 토지피복자료를 이용한 산사태 발생지역 구분과정상의 오차, 아울러 모형의 오차 등을 고려할 때, 이러한 오차는 매우 미미한 수준인 것으로 판단되며, 이를 통해 모형의 적용성을 확인할 수 있었다.

• 한국물환경학회지
• /
• 제24권4호
• /
• pp.488-498
• /
• 2008

Soil and Water Assessment Tool (SWAT) model have been widely used in simulating hydrology and water quality analysis at watershed scale. The SWAT model extracts topographic feature using the Digital Elevation Model (DEM) for hydrology and pollutant generation and transportation within watershed. Use of various DEM cell size in the SWAT leads to different results in extracting topographic feature for each subwatershed. So, it is recommended that model users use very detailed spatial resolution DEM for accurate hydrology analysis and water quality simulation. However, use of high resolution DEM is sometimes difficult to obtain and not efficient because of computer processing capacity and model execution time. Thus, the SWAT Topographic Feature Extraction Error (STOPFEE) Fix module, which can extract topographic feature of high resolution DEM from low resolution and updates SWAT topographic feature automatically, was developed and evaluated in this study. The analysis of average slope vs. DEM cell size revealed that average slope of watershed increases with decrease in DEM cell size, finer resolution of DEM. This falsification of topographic feature with low resolution DEM affects soil erosion and sediment behaviors in the watershed. The annual average sediment for Soyanggang-dam watershed with DEM cell size of 20 m was compared with DEM cell size of 100 m. There was 83.8% difference in simulated sediment without STOPFEE module and 4.4% difference with STOPFEE module applied although the same model input data were used in SWAT run. For Imha-dam watershed, there was 43.4% differences without STOPFEE module and 0.3% difference with STOPFEE module. Thus, the STOPFEE topographic database for Soyanggang-dam watershed was applied for Chungju-dam watershed because its topographic features are similar to Soyanggang-dam watershed. Without the STOPFEE module, there was 98.7% difference in simulated sediment for Chungju-dam watershed for DEM cell size of both 20 m and 100 m. However there was 20.7% difference in simulated sediment with STOPFEE topographic database for Soyanggang-dam watershed. The application results of STOPFEE for three watersheds showed that the STOPFEE module developed in this study is an effective tool to extract topographic feature of high resolution DEM from low resolution DEM. With the STOPFEE module, low-capacity computer can be also used for accurate hydrology and sediment modeling for bigger size watershed with the SWAT. It is deemed that the STOPFEE module database needs to be extended for various watersheds in Korea for wide application and accurate SWAT runs with lower resolution DEM.

• 대한토목학회논문집
• /
• 제31권3B호
• /
• pp.221-232
• /
• 2011

산불 사면의 토양침식에 대하여 세 개의 토양침식 모형의 적용성을 평가하였다. 영동지역에서 발생한 2000년 대규모 산불지역 조사구에서 조사된 자료가 분석에 사용되었다. 본 연구에서 채택한 토양침식 모형은 경험적 모형인 RUSLE, 물리적 모형인 WEPP의 산림지역 적용 모드, 산불사면을 대상으로 개발된 SEMMA이다. 이들 모형으로 산정한 지표유출량과 토양 침식량을 관측치와 비교하였다. 적용결과 모든 모형들은 토사유출량의 최대치를 저평가 하였으며, RUSLE와 WEPP은 2배 이상의 차이를 보였다. SEMMA는 가장 좋은 모형반응계수, 결정계수, 모의효율을 나타내었다. 산불발생 경과연수에 따른 모형 적용 평가에서 산불에 의해 교란된 초기 단계에서는 모든 모형이 저평가하였다. 산불 사면에 대한 토양침식 모의 결과는 관측치가 크면 과소 예측하는 경향을 보였다. 산불직후 반발수력이 커진 고은입자 토양의 과대 노출로 작은 규모의 강우에도 많은 양의 토사유출이 발생할 수 있음에도 불구하고 이와 같이 과소 예측하는 것은 이들 모형이 산불의 영향으로 가중되는 토양침식 영향인자를 반영하는데 한계를 갖고 있기 때문으로 보인다.

• 한국물환경학회지
• /
• 제30권6호
• /
• pp.638-646
• /
• 2014

Soil erosion from agricultural fields leads to various environmental problems weakening the capabilities of flood control and ecosystem in water bodies. Regarding these problems, Ministry of Environment of South-Korea prepared various structural and non-structural best management practices (BMPs) to control soil erosion. However, a lot of efforts are required to monitor and develop BMPs. Thus, modeling techniques have been developed and utilized for these issues. This study estimated the effectiveness of BMPs which are a vegetation mat with infiltration roll and Roll type vegetation channel using Soil and Water Assessment Tool (SWAT) model through the adjustment of the conservation practice factors, P factors, for Universal Soil Loss Equation which were calculated by monitoring data collected at the segment plots. Each BMP was applied to the areas with slopes ranged from 7% to 13% in the Haeanmyeon watershed. As a result of simulation, the vegetation mat with infiltration roll and Roll type vegetation channel showed 55% and 59% efficiency of soil erosion reduction, respectively. Also, Vegetation mat with infiltration roll and Roll type vegetation channel showed each 11.2% and 11.8% efficiency in reduction of sediment discharge. These roll type vegetation channel showed greater efficiency of soil erosion reduction and sediment discharge. Based on these results, if roll type vegetation channel is widely used in agricultural fields, reduction of soil erosion and sediment discharge of greater efficiency would be expected.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.222-225
• /
• 2001

In urban environments, the surface land impermeability fundamentally related to urban growth emphasizes the environmental problems such as the storm water peak flow (so-called the urban flooding) and the pollution. The conventional urban drainage system provides a number of temporary reservoirs intercepting and retaining surface-derived pollutants following their introduction to and deposition upon the impermeable surface. Gully-pots are common features in urban drainage systems in Korea, which were installed for draining rainwater to prevent regurgitation in rainy season and retaining larger particles, hence minimizing pipe blockage problems. When the road runoff conveying sediment enters a gully-pot, the sediment mixes with the gully liquor causing direct pollution of receiving waters. The characteristics of local sediment contamination are usually related to the types of land use activities that take place or have taken place within the area., This study was undertaken to evaluate the spatial and temporal variations of the contamination of gully-pot sediments in Seoul with respect to heavy metals such as As, Cd, Co, Cr, Ni, Pb, Cu and Zn. The heavy metal data were examined according to the land use type. In this paper, sampling sites in Seoul were divided into six groups (commercial area, industrial area, residental area, motor way, rural area, and local pollution).

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.409-412
• /
• 2003

Total extraction of stream sediments in the Kwangyang mine area shows their significant pollution with most trace metals such as Cr, Co, Fe, Pb, Cu, Ni, Zn and Cd, due to sulfide oxidation in waste dumps. Calculations of enrichment factor shows that Chonam-ri creek sediments are more severely contaminated than Sagok-ri sediments. Using the weak acid (0.1N HCl) extraction and sequential extraction techniques, the transport and sediment-water partitioning of heavy metals in mine drainage were examined for contaminated sediments in the Chonam-ri and Sagok-ri creeks of the Kwangyang Au-Ag mine area. Calculated distribution coefficient (Kd) generally decreases in the order of Pb $\geq$Al > Cu > Mn > Zn > Co > Ni $\geq$ Cd. Sequential extraction of Chonam-ri creek sediments shows that among non-residual fractions the Fe-Mn oxide fraction is most abundant for most of the metals. This indicates that precipitation of Fe hydroxides plays an important role in regulating heavy metal concentrations in water, as shown by field observations.

• 한국토양비료학회지
• /
• 제50권6호
• /
• pp.684-696
• /
• 2017

An investigation of grain size, organic compounds and metal distribution in lakes from Geum river basin (Republic of Korea) was conducted in two years (2014 and 2015). The samples of sediment were collected from the 3 lakes (12 sites). The samples were analyzed the concentration of metals (Pb, Zn, Cu, Cr, Ni, As, Cd, Hg, Al, and Li) and general indices including grain size. Spearman correlation coefficients were determined using general indices and metal concentrations respectively. The organic qualities of sediments were improved in 2015 compared with 2014. The concentrations of metals were lower than Sediment Criteria of Lakes in Korea. The significant Spearman correlation coefficients were presented only sand-clay, clay-water content, COD-TOC, Cu-Ni, Cd-Li, Zn-Li, and Cr-Ni of general and metal parameters in 2014, 2015 and both of two years.