• Title/Summary/Keyword: soil sediment

Search Result 699, Processing Time 0.023 seconds

Effects of Forest Road Construction on Stream Water Qualities(I) - The Variation of Suspended Sediment by Forest Road Construction - (임도개설(林道開設)이 계류수질(溪流水質)에 미치는 영향(影響)(I) - 임도개설(林道開設)에 따른 부유토사량(浮遊土砂量)의 변화(變化) -)

  • Chun, Kun-Woo;Kim, Min-Sik;Ezaki, Tsugio
    • Journal of Korean Society of Forest Science
    • /
    • v.85 no.2
    • /
    • pp.280-287
    • /
    • 1996
  • This study was carried out to investigate the export rate of suspended sediment by different precipitation intensity after forest road construction for torrential streams on three different watersheds with various forest road density(Watershed A : 6.67m/ha, Watershed B : 5.52m/ha, and Watershed C : control) in the Experimental Forest of Kangwon National University. The results were as follows. 1. Closely related to the the amount of rainfall in both 1994 and 1995, the average streanfkiw rate was less than $0.25{\times}10^4m^3/day$ during May and June and $5.0{\times}10^4m^3/day$ during July and August. More than $25{\times}10^4m^3/day$ of streanflow rate was occurred twice in 1994 and seven times in 1995. 2. The amount of suspended sediment in three watersheds was less than standard of drinking water(25mg/l) before road construction with daily rainfall of 74mm, 92mm, and 120mm in 1994, also after road construction with daily rainfall of 21mm and 47mm in 1995. But, under the 192mm of daily rainfall, Watershed C did not show the difference in the amount of suspended sediment, however, Watershed A and B produced 1,525mg/l and 775mg/l, respectively, which is 61 and 31 fold of stabdard of drinking water, and construction to export for 35 hours after rainfall. 3. The maximum amount of suspended sediment was less than the standard of drinking water with light rainfall before and after road construction. Under the 192mm of daily rainfall, the maximum amounts of suspended sediment in Watershed A and B were 13,150mg/l and 2,690mg/l, of 526 and 108 fold of standard of drinking water, respectively, showing obvious water pollution by sedimentation. Results of the study indicated that the forest road construction had great influence on the sedimentation, and getting increased by higher road density and heavier rainfall. Therefore such practices as vegetation covering and soil erosion control facility should be established accompanying with forest road construction to prevent from sedimentation.

  • PDF

Fluctuation Features and Numerical Model for Underground Temperature in Shallow Subsurface Soil (천층 토양 내 지중온도 변동 특성과 수치모델 평가)

  • Jeong, Jaehoon;Kim, Gyoobum;Park, Hyoungki;Kim, Hyoungsoo;Kim, Taehyung
    • Journal of the Korean GEO-environmental Society
    • /
    • v.16 no.5
    • /
    • pp.35-42
    • /
    • 2015
  • This is conducted to observe underground temperature and to analyze its change affected by climate condition and soil infiltration in the mountainous area, Yesan region, Chungcheong-namdo province. Additionally, underground temperature change is also simulated using air temperature and soil thermal properties with a numerical model. Soil temperature monitoring data acquired from each depth, 20 cm, 50 cm, and 100 cm, indicates that the data within 50 cm in depth shows peak-shaped big fluctuation directly affected by air temperature and it at 100 cm has open-shaped small fluctuation. Underground temperature variation, a difference between high and low values, during monitoring period is weakly proportional to hydraulic conductivity of the sediment and it is assumed that water plays a part in delivering air temperature in soil. The underground temperature estimated by a numerical model is very similar to the observed data with an average value of 0.99 cross-correlation coefficient. From the result of this study, the aquifer unsaturated hydraulic conductivity of the soil and the groundwater recharge is likely to be able to estimate with underground temperature profile calculated using a numerical model.

Evaluation on MUSLE Runoff Energy Coefficient in Small Forest Watershed (산림소유역에서 MUSLE 유출에너지인자 계수값의 적용성 평가)

  • Kim, Jaehoon;Choi, Hyung Tae;Lim, Hong-geun
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.18 no.6
    • /
    • pp.191-200
    • /
    • 2015
  • This study was carried out to investigate coefficient and exponent of runoff energy in MUSLE for small forest watershed, Hwachoen watershed in Gangwon-do. For 15 rainfall events, runoff volume, peak discharge and sediment yield were measured and these data were used to calculate coefficient and exponent of runoff energy. The results of this study showed that $LS{\bullet}K{\bullet}C{\bullet}P$ factors of MUSLE were affected by slope steepness. The coefficient and exponent of runoff energy were validated with coefficient of efficiency of 0.92 and these values were suggested to 0.002 and 0.81 respectively. The comparison of the coefficients and exponents between Hwacheon and other forest watersheds showed that these values would reflect the effect of forest management within watershed.

Inflows and Route Analysis of the Riverbed Sediment Using LiDAR Data (LiDAR 데이터를 이용한 하상퇴적물의 유입량 및 경로 분석)

  • Kang, Joon-Mook;Yun, Hee-Cheon;Kang, Young-Mi
    • 한국공간정보시스템학회:학술대회논문집
    • /
    • 2005.05a
    • /
    • pp.427-433
    • /
    • 2005
  • 인공적으로 조성한 저수지의 대부분은 유역면적이 넓고 집중강우로 인하여 매년 입자성 물질이 상당량 유입하는 편이며 이들의 장기간 축적으로 인하여 저수지 용량을 줄이고 수질관리에 어려움을 야기 시킨다. 따라서 이들에 대한 정화한 예측이 필요한 실정이지만 지표에서의 침식현상은 토양조건, 피복조건, 그리고 지형조건 등의 복합적 요소에 의하여 지배되기 때문에 정확한 유입량을 산정하기에 많은 어려움이 존재한다. 본 연구에서는 높은 정확도를 갖는 LiDAR(Light Detection and Ranging)기술을 이용하여 DEM, DSM을 제작하고 반사강도 데이터로부터 물질적 특성을 분류하여 연구지역내 범용토양유실공식(USLE; Universal Soil Loss Equation)에 의한 유입퇴적량을 산정하였다. 또한 이들 분포를 기준으로 퇴적물의 유입 가능성이 큰 위치를 파악하였으며 지형특성에 따른 퇴적물의 유입경로를 분석하였다.

  • PDF

A Study on Determination of Fallout Pu in the Environment

  • Lee, Myung-Ho;Park, Young-Hyun;Do Won park;Park, Gun-Sik;Kim, Sang-Bog;Lee, Chang-Woo
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1998.05b
    • /
    • pp.627-632
    • /
    • 1998
  • Using an ammonium oxalate-ammonium sulfate electrolyte, a simple, quantitative, and fast technique for preparing sources for analytical alpha spectrometry was developed. To determine the optimum conditions for plating plutonium, parameters such as current density .and pH of electrolyte affacting the electrodeposition of the plutonium have been investigated. An optimized electrodeposition step for the determination of plutonium has been validated with a result of application to IAEA-Reference Soils. The new method of fallout Pu determination has been applied to environmental samples such as soil, sediment and moss samples in Korea.

  • PDF

Measuring Phosphatase Activity in Peatland Soils: Recent Methodological Advances

  • Freeman, Chris;Jang, In-Young;Zho, Kyoung-Duk;Kang, Ho-Jeong
    • Environmental Engineering Research
    • /
    • v.13 no.4
    • /
    • pp.165-168
    • /
    • 2008
  • Measurements of phosphatase activity in peatlands are made difficult by the low levels of activity and the characteristically high concentrations of dissolved organic matter within the sediments. These materials may cause high background absorbances in colorimetric assays, and quenching interference in fluorimetric assays. This review describes the development of a new approach which allows such problems to be overcome by using HPLC to separate the interferences from the products of enzymic hydrolysis. This approach is applicable to various environmental samples such as peat, wetland sediment, and sludge which may contain a large amount of interfering organic matters.

Case Study: Operation of the Juam Constructed Wetland for Effluent from a Sewage Treatment Plant and Diffuse Pollution for Two Years (하수종말처리장 방류수와 비점오염원 처리를 위한 주암호 인공습지 2년 운영 사례)

  • Jung, Yong-Jun
    • Journal of Korean Society on Water Environment
    • /
    • v.22 no.6
    • /
    • pp.1031-1037
    • /
    • 2006
  • In order to improve water quality of the Juam Lake, a constructed wetland was implemented and operated for 2 years with the effluent of sewage treatment plant and diffuse pollutant discharged from agricultural area. During the summer season, average removal efficiencies for BOD and SS were 15.8% and 39.4%, respectively. Due to the mixed effect of vegetation, soil microbes and sediments, the higher nutrient removal efficiencies were obtained: average T-N and T-P removal efficiencies were 64.2% and 71.7%, respectively. The concentration of sediment was increased initially, and maintained constant throughout monitoring period. The highest nitrogen and phosphorus uptake were observed in Phragmites japonica. The nitrogen uptake was estimated as 0.235 DW mg/g while phosphorus uptake was estimated as 2.059 DW mg/g.

Evaluation of n multimedia fate model, POPsME for PAHs

  • Lee, Yunah;Lee, Dong-Soo;Kim, Seung-Kyu;Kim, Yoon-Kwan;Kim, Dong-Won
    • Proceedings of the Korea Society of Environmental Toocicology Conference
    • /
    • 2003.10a
    • /
    • pp.31-32
    • /
    • 2003
  • A dynamic multimedia model with 2-dimensional spatial resolution, POPsME (Persistent Organic Pollutants in Multimedia Environments), was evaluated by comparing predicted relative concentrations with those measured. A total of 12 polycyclic aromatic hydrocarbons (PAHs) were tested (phenanthrene, anthracene, fluoranthene, pyrene, chrysene, benz (a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenz(a,h)anthracene, benzo(g,h,i)perylene, and indeno(1,2,3-c,d)pyrene). The concentrations were measured in air particulates, water (dissolved phase and suspended solids (ss)), soil, sediment, and leaves of Pinus koraiensis and Prunus serrulata at seven sites in the Seoul and neighboring area (150km x 150km), Korea.

  • PDF

Concentrations of PCBs (Polychlorinated Biphenyls) in coastal sediments of Korea (국내 연안 퇴적물내 PCBs(Polychlorinated Biphenyls) 오염도 현황)

  • Kim, Gi-Whan;Lee, Yoon
    • Journal of environmental and Sanitary engineering
    • /
    • v.11 no.3
    • /
    • pp.9-12
    • /
    • 1996
  • Polychlorinated biphenyl (PCBs) is one of major toxic pollutants in marine environments, This artificial chlorinated compound has been found in freshwater, seawater, soil, sediments and organismes living in various environments. Because of its toxicity and degradability, its uses in industrial processes have been banned after 1984 in Korea. Coastal area is an important environment for agriculture, industry, transportation, reduction of pollution loads through biogeochemical processes, cycling of nutrients and recreation. Input of pollutants from land and freshwater has been occurring through runoff, rivers and estuaries. Concentrations of PCBs were determined with GC-ECD. Concentrations of PCBs were in the range of 1.0 - 19.2 ng/g-dry weight of sediment(g-d.w.) at Ulsan, 4.5 -8,2 ng/g-d.w. at Onsan, 2.7 - 33.5 ng/g-d.w. at Masan and 4.0 - 60.7 ng/g-d.w. in Kwangyang, In Inchon area, PCBs were not detected in sediments. In sediments of Nakdong estuary, the distribution of PCBs' concentrations was 0.19 - 303 ng/g-d.w.

  • PDF

A Study on the Water Quality Prediction in Rural Watershed Using SWAT-WASP Model (SWAT-WASP 모형을 이용한 농촌유역의 수질예측에 관한 연구)

  • 권명준;권순국
    • Proceedings of the Korean Society of Agricultural Engineers Conference
    • /
    • 1999.10c
    • /
    • pp.708-714
    • /
    • 1999
  • For the assessment of the level of stream pollution, SWAT-WASP model linked with GIS was applied to a respresentative rural watershed and evaluated for its applicability through calibration and verfication using observed data. Using daily water yields, sediment yields and nutrient discharge simulated by SWAT model, WASP input file was build. Point source pollutant and water quality change in stream was considered in WASP model. For the model applicatiion , digital maps were constructed for watershed boundary, ladn-use , soil series , digital elevation, and topographic data of Bok-Ha watershed using GRASS. The model application results showed that the simulated runoff was in a good agreement with the observed data and indicated reasonable applicability of the model.

  • PDF