• Journal of the Korean Geosynthetics Society
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2020

This paper presents the results of experimental investigation on the effect of degree of saturation of soil on the pullout behavior of a geogrid. Different test variables were taken into account while performing the experiment including the soil physical conditions based on water content and external loading applied. The soil used was locally available weathered granite soil. The tests included variations in saturation of about 90%, 80%, 70% and 45% (optimum moisture content). The pullout tests were performed according to ASTM standard D 6706-01. The results indicate that increasing the degree of saturation in the soil decreases the pull-out capacity, which in turn decreases the interface friction angle and interaction coefficient. The decrease in the pullout interface coefficient was observed to be around 12.50% to 33.33% depending on the normal load and degree of saturation of the soil. The test results demonstrated the detrimental effect of increasing the degree of saturation within the reinforce soil on the pullout behavior of reinforcement, thus on the internal stability. The practical inferences of the outcomes are analyzed in detail.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.302-305
• /
• 2003

The electrokinetic remediation tests for natural soil contaminated by lead are performed on unsaturated conditions, in which the degree of saturation is controlled through the changes in water content and the constant unit weight. At the degree of saturation of 70% the small acid range and electrical potential is developed. The changes in the water content are little above the saturation of 90%. But it is increased by 1.7 times at the degree of saturation of 70%. Finally, the efficiency of extraction is improved at 70% than 100%.

• Journal of Korea Water Resources Association
• /
• v.31 no.2
• /
• pp.167-176
• /
• 1998

On steep hillslopes, saturation zone formations and subsurface flows were monitored through the observation systems of observation wells, tensiometers and trenches. By the 103 mm rain which had fallen on the hillslope with dry soil moisture, the saturation zone began to be formed at the top of hillslope during the rain and developed to be formed within a few hours after the end of rain on all hillslope. Subsurface water outflowed mainly from the soil profile of 0-40 cm depth, but did not outflow from the one of 40-80 cm depth. This saturation zone seemed to be formed by partially saturation of soil. This resulted for two reasons. Firstly, the saturation zone was formed by a smaller amount of rain than that required. Secondly the soil at a certain depth below the water table was unsaturated. Saturation zones formed by pre-rains responded rapidly to rains and subsurface water outflowed mainly from the soil profile of 40-80 cm depth simultaneously with the rising of the water level. The rates of subsurface discharge from the soil profile of 40-80 cm depth to the precipitation were related to the antecedent precipitation although the maximum water levels of saturation zone formed by four rains were similar.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.6
• /
• pp.61-69
• /
• 2004

The aim of the work described in this paper was to confirm the application of the equation of the soil-water characteristic curves on an unsaturated soil. A series of suction test for unsaturated soils was conducted on the selected 4 kinds of soil using modified pressure extractor apparatus. And it was carried out to analyse The experimental parameters which can be describe the soil-water characteristics, were determined by using the data obtained from the experiment. From the results, it was found that The matric suction varied according to the grain size distribution, amount of fine grain particles and void ratio. Also it was found that the residual degree of saturation was decreased with in crease of the void ratio, but the pore size distribution index and air entry value were increased with in crease of the void ratio. And The application of the soil-water characteristic curve equation was confirmed for the various conditions and the various state by the comparison between the measured degree of saturation and the predicted degree of saturation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.3
• /
• pp.1-7
• /
• 2000

The aim of the work described in this paper is to study the shear characteristics of the weathered granite soil. To this end, a series of consolidated undrained triaxial compression tests are carried out to investigate the shear parameters-cohesion and internal friction angle for the degree of saturation and degree of weathering. From the results, it is found that the shear parameters of weathered granite soil are influenced on the degree of saturation, degree of weathering and disturbance. Especially, internal friction angle is more influenced on the upper factors than cohesion. And shear parameters are more acted on the degree of saturation than the degree of weathering in the test range. It is, therefore, recommended that must be considered the conditions of granite soil-degree of saturation, degree of weathering and disturbance etc-in case of the calculation of bearing capacity, stability analysis and other designs with shear parameters.

• Water for future
• /
• v.29 no.2
• /
• pp.143-151
• /
• 1996

The dynamic responses in the subsurface outflow, surface saturation area, soil moisture storage are established by numerical experiments with Richards equation. In addition to this, the dynamical relationship between surface saturation area and subsurface outflow, and between surface saturation area and soil moisture storage are also determined by varying the hillslope shape, soil type, and boundary condition. The simulation results indicate that the dynamical relationships between surface saturation area and subsurface outflow, and between surface saturation area and soil moisture storage are approximated by the steadystate relationships. And the dynamic responses of subsurface outflow and surface saturation area are characterized by the double peaks although the rainfall pattern is asimple pulse input. As a result of numerical simulation, the physical mechanism for the occurrence of the double peaks is explained using the concept of variable source area.

• Water for future
• /
• v.28 no.5
• /
• pp.129-140
• /
• 1995

In this study we derived steady-state relationships between surface saturation area and subsurface outflow, and between surface saturation area and soil moisture storage through numerical experiments with Richards equation on a hillslope. Numerical experiments analyzed the sensitivity of topographic and soil hydraulic properties on steady-state relationships between surface saturation area and subsurface outflow. And the power law for the extent of surface saturation area was determined as a function of subsurface outflow or soil moisture storage.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.4
• /
• pp.93-103
• /
• 2012

A suction-saturation control technique based on flow pump system was developed to investigate hydraulic properties in unsaturated soils. The flow pump system is designed based on the principle of the axis-translation technique and triaxial equipment, and gives the suction-time and suction-saturation curves, the primary relationship needed for interpreting the response of unsaturated soils and link between theory and the material properties in unsaturated soil mechanics. Using the suction-saturation control technique, suction-time relationship and soil-water retention curve (SWRC) during hydraulic hysteresis were investigated with different net confining pressures and porosities. Three types of soils-two sands and a silt were used in this paper. This paper showed the effect of the hysteresis on the SWRC due to different net confining pressures and porosities. This means that a careful decision must be made as to which condition is to be modeled, since the delicate difference of the conditions in physical modeling can cause the different experimental output.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.776-781
• /
• 2010

Estimating the electrical conductivity of the saturation-paste (SP) is a common method to assess soil salinity. To assess soil salinity realistically, it is important to extract soil solution under field capacity. However, few studies on salinity assessment have been conducted for soil solution extracted under field capacity (-33 kPa; FC) moisture condition due to difficulty in soil solution extraction. This study was conducted to evaluate whether saturation-paste can represent field condition. Soil solutions were extracted from 22 soils in the plastic film house (PFH) and 18 soils in the reclaimed land (RL) at saturation and field capacity moisture conditions. Those were analyzed for pH, EC, cations ($K^+$, $Ca^{2+}$, $Mg^{2+}$, $Na^+$) and anions ($Cl^-$, ${NO_3}^-$, ${PO_4}^{3-}$, ${SO_4}^{2-}$). Both cations and anions of soil solution extracted from FC showed high correlations with ions extracted from SP in the PFH and the RL, except for ${NO_3}^-$, ${PO_4}^{3-}$ in the RL. Results of the t-test, the ECe and $EC_{FC}$ were not significant at significance level 0.05. The slopes of the equations between $EC_{FC}$ and ECe at more than sand 50% soils were higher than less than sand 50% soils, and differences of saturation percentage between SP and FC showed larger as increasing sand percentage. EC was related to soil water retention by soil texture. To determine the EC, soil texture and other soil properties which effect the soil moisture should be considered.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.1
• /
• pp.71-75
• /
• 2001

Linear regression analyses between the electrical conductivity of the saturation-paste extract. ECe, and the electrical conductivity of the 1:5 soil extract, EC1:5, for different soils yielded different dilution factors, or slopes with significant $r^2$ values from 0.842 to 0.905. The dilution factor was inversely proportional to the cation exchange capacity of soil which reflected textural difference. The dilution factors recommended for different textural classes ranged from 6.44 for clay soil to 12.29 for sandy soil based on the CEC's of the textural classes among 350 surface soils recorded in the Taxonomical Classification of Korean Soils except volcanic ash derived soils. Though saturation percentage of the saturation-paste of the soils in this study, CEC should be taken into account for dilution factor between ECe and EC1:5, and the suggested dilution factors might be reasonable estimate for the soil textural classes.