• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.105-112
• /
• 2011

This paper presents the numerical modelling technique for modeling the time-dependent behavior of geosynthetic reinforced soil wall under a sustained load. The applicability of power law-based creep models for modeling the creep deformations of geogrid and reinforced soil was first examined. The modeling approach was then used to simulate the long-term performance of a geosynthetic reinforced soil wall used in a bridge abutment. The results indicated that the power law-based models can be effectively used for modelling the long term behavior of geosynthetic reinforced walls under sustained loading. In addition, it was shown that, when using creep deformation susceptible backfill soils, the abutment wall and the sill beam may experience deformations exceeding allowable limits. Practical implications of the findings from this study are discussed in great detail.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.04a
• /
• pp.74-74
• /
• 1999

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.13-17
• /
• 2005

For the SAT modeling system considering the reaction module which consists of nitrification, denitrification and organic oxidation, an imaginary cross-sectional 2-dimensional model simulation was carried out to analyze the sensitivity of the model. Four parameters, such as hydraulic conductivity, source water loading rate, ground surface pavement and operation schedule, were considered for the sensitivity analysis. Most factors considered in model development step were well reflected in the simulation results.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.6
• /
• pp.74-81
• /
• 2021

A simple and efficient scheme is presented that attempts to implement the site-specific denitrification rate in the reactive transport modeling for the nitrate in groundwater. A series of correlation analyses were conducted using 133 datasets obtained from different nitrate-contaminated sites to find the empirical relationships between denitrification rates and various subsurface properties. Based on Pearson's correlation analysis, the soil organic carbon concentrations showed a statistically significant correlation (r = 0.75, p < 0.05) with the denitrification rates. A linear regression was performed, which could be utilized to effectively determine the site-specific denitrification rate based on the soil organic carbon concentration of a site. The proposed method is expected to effectively replace the conventional methods which either were too complicated for practical application or impose large uncertainties that might end up with unreliable results.

• Geomechanics and Engineering
• /
• v.17 no.3
• /
• pp.287-294
• /
• 2019

The finite element method (FEM) is widely used to evaluate the seismic performance of pile-supported buildings. However, there are problems associated with modeling the pile end resistance using the FEM, such as the dependence on the mesh size. This paper proposes a new method of modeling around the pile tip to avoid the mesh size effect in two-dimensional (2D) analyses. Specifically, we consider the area of influence around the pile tip as an artificial constraint on the behavior of the soil. We explain the problems with existing methods of modeling the pile tip. We then conduct a three-dimensional (3D) analysis of a pile in various soil conditions to evaluate the area of influence of the soil around the pile tip. The analysis results show that the normalized area of influence extends approximately 2.5 times the diameter of the pile below the pile tip. Finally, we propose a new method for modeling pile foundations with artificial constraints on the nodal points within the area of influence. The proposed model is expected to be useful in the practical seismic design of pile-supported buildings via a 2D analysis.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.3
• /
• pp.9-15
• /
• 2005

Soil aquifer treatment is a water reuse technology that secondary or tertiary treated wastewater is infiltrated into the aquifer in which physical and biochemical reactions occur. Major consideration in SAT is the removal and transport of DOC and nitrogen species. In this study, reaction mechanism in SAT was examined considering nitrification, denitrification and organic oxidation. In addition, SAT modeling system was developed as the reaction mechanism was applied to groundwater flow and transport model. In verification of the reaction module by 1-dimensional unsaturated soil column test, the experimental data of all of the species, ammonium, nitrate, DOC and DO, were well matched with the simulation results. In sensitivity analysis, ammonium partition coefficient, dissolved oxygen inhibition constant and biomass decay rate affect ammonium, DOC and DO concentration of effluent, respectively.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.2
• /
• pp.49-60
• /
• 2007

The alpine agricultural activities are usually performed at higher and steep areas in nature. Thus, significant amounts of soil erosion are occurring compared with those from other areas. Thus, the soil erosion induced environmental impacts in these areas are getting greater. The Doam watershed is located at alpine areas and it has been well known that the agricultural activities in the watershed are causing accelerated soil erosion and water quality degradations. Many modeling approaches were employed to solve soil erosion and water quality issues. In this study, the Soil and Water Assessment Tool (SWAT) model was utilized to simulate the hydrologic and sediment behaviors in the Doam watershed. In many previous modeling studies, the digital soil map and its corresponding soil properties were used without modification to reflect soil conditioning at many agricultural fields of the Doam watershed. Thus, the soil sample was taken at the agricultural field within the Doam watershed and analyzed for its physical properties. In this study, the digital topsoil properties in the agricultural fields within the Doam watershed were replaced with the soil properties for reconditioned soil analyzed in this study to simulate the impacts of using soil properties for reconditioned soil in hydrologic and sediment modeling at the Doam watershed using the SWAT model. The hydrologic component of the SWAT model was calibrated and validated for measured flow data from 2002 to 2003. The $R^2$ value was 0.79 and the EI value was 0.53 for weekly simulated data. The calibrated model parameters were used for hydrologic component validation and the $R^2$ value was 0.86 and the EI value was 0.74 for weekly data. For sediment comparison, the $R^2$ value was 0.67 and the EI value was 0.59. These statistics improved with the use of soil properties of the reconditioned soil in the field compared with the results obtained without considering soil reconditioning. The simulated sediment amounts with and without considering the soil properties of the reconditioned soil were 284,813 ton and 158,369 ton, respectively. This result indicates that there could be approximately 79% of errors in estimated sediment yield at the Doam watershed, although the model comparison with the measured data gave similar satisfactory statistics with and without considering soil properties from the reconditioned soil.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.443-450
• /
• 2000

In this study a numerical method for soil-pile interaction analysis buried in multi-layered half planes is presented in frequency domain using FE-BE coupling. The total soil-pile interaction system is divided into two parts so called far field and near field beam elements are used for modeling a pile and coupled with plain strain elements for soil modeling. Boundary element formulation using the multi-layered dynamic fundamental solution is adopted to the far field and coupled with near field modeled by finite elements. In order to verify the proposed soil-pile interaction analysis method the dynamic responses of a pile on multi-layered dynamic fundamental solution is adopted to the far field and coupled with near field modeled by finite elements. In order to verify the proposed soil-pile interaction analysis method the dynamic responses of a pile on multi-layered half-planes are performed and compared with experiment results. Through this developed method the dynamic response analysis of a pile buried in multi-layered half planes can be calculated effectively in frequency domain.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.65-70
• /
• 1998

Soil moisture measuring is important for irrigation scheduling of upland crops, estimation of evapotranspiration, and hydrologic modeling. Hence, the comparative study was implemented for the soil moisture measuring instruments, Neutron probe and TDR with soil sampling methods, and the result was represented.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.189-198
• /
• 2006

This paper concerns the finite element (FE) modeling approach for NATM tunneling in water bearing ground within the framework of stress-pore pressure coupled analysis. Fundamental interaction mechanism of ground and groundwater lowering was first examined and a number of influencing factors on the results of coupled FE analysis were identified. A parametric study was then conducted on the influencing factors such as soil-water characteristics, location of hydraulic boundary conditions, the way of modeling drainage flow, among others. The results indicate that the soil-water characteristics plays the most important role in the tunneling-induced settlement characteristics. Based on the results, modeling guidelines were suggested for stress-pore prssure coupled finite element modeling of NATM tunneling.