• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.95-102
• /
• 2010

The combustion characteristics of roof 'Jucsim' structure was analysed using real scale fire test on wooden structure heritage building. the fire test model was made to consider roof timberling internal structure for a Sunglemun. Structure of test body layed lime, soil, 'Jucsin' and ceiling board excepting roof tile to find heat propagation process by setting thermocouples. The first test to find fire growth and heat propagation process in the part of ceiling. The second test organized to find the efficiency of fire proof paint between ceiling board and inside of Jucsim structure. The third test try to get the performance level of fire proof fabric with the same manner. The result showed from the test proof the heavy smoke exposure with limited effect of fire proof paint however, reliable fire resistance effect showed in case of fire proof fabric.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.130-137
• /
• 2012

This research evaluated the effectiveness of organic matter ratios in substrate and mulching materials under mn-irrigated condition green roofs by measuring the effects on growth of Liatris spicata. Four mulching materials were installed, i. e. nun-mulched control(CON), volcanic ash soils(VAS), non-woven black fabric mat(NBM) and pine bark(PAK). Three levels of organic maller volume percentage in an amended soil were evaluated, amended soil: organic matter=100:0($A_1O_0$), amended soil: organic matter=80:20($A_4O_1$) and amended soil: organic matter=50:50($A_1O_1$). Plant height, number of leaves, diameter of flower stalk, number of florets, chlorophyll contents, shoot fresh and dry weight were recorded from April to September, 2010, and survival rate was examined on May 2011 of the following year. In the $A_1O_0$, the number of leaves, number of florets and chlorophyll contents were higher in Liatris spicata grown on NBM than other mulching treatments. Especially, plant height, shoot fresh and dry weight were significantly higher. However, it resulted the lowest survival rate than other mulching treatments. 2. In the $A_4O_1$, the plant height, number of leaves, number of florets, shoot fresh and dry weight were higher than other mulching treatments, but there was no significant difference except for the plant height of Liatris spicata grown on NBM. The survival rate was decreased by 40~60%, compared with $A_1O_0$, after overwintering. 3. In the $A_1O_1$, the plant height, number of leaves, diameter of flower stalk, number of florets, chlorophyll contents, shoot fresh and dry weight were slightly higher than other mulching treatments, but there was no significant difference from Liatris spicata grown on NBM and VAS. The survival rate was observed by 0% over all mulching treatments after overwintering. Therefore, the non-woven black fabric mat(NBM) promoted the Liatris spicata's growth and flowering compared with other mulching treatments. However, the survival rate was decreased significantly, and the organic matter ratios were increased after overwintering under non-irrigated green roofs.

• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.88-92
• /
• 2002

The study was conducted to estimate stimulation of plant growth of blue and red leaf lettuce (Lactuca sativa L.) as affected by covering methods with vinyl materials containing concentrated PO film. Plants were grown in direct, direct and tunnel, and tunnel covering with 'Pasraido materials' from October 13 to 31. With the covering mean air temperature, soil temperature, leaf temperature and relative humidity remarkedly increased. Higher temperature was observed in the order of direct and tunnel, direct, tunnel covering and the control. Photosynthetic photon flux (PPF, $\mu$mol m$^{-2}$ . s$^{-1}$ ) was observed in reverse order of temperature. Concentration of $CO_2$ was higher during night than during day under the light. Accumulation of highest $CO_2$ at night was obtained from direct coverings followed by direct and tunnel, tunnel covering and the control. Plant height, leaf number and leaf area of blue and red lettuces were stimulated by direct covering. However, there was no significant difference.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.3
• /
• pp.33-43
• /
• 2022

South Korea's agricultural nitrogen balance and phosphorus balance rank first and second, respectively, among OECD countries, and proper nutrient management is required to preserve the water quality of rivers and lakes. This study evaluates the effects of furrow mulching on the reduction of non-point source pollution (NPS) load from a sloped upland. The study site was Wanju-gun, Jeollabuk-do, and the survey period was from 2018 to 2019. The slope of the testbed was 13%, and the soil type was sandy loam. The cropping system consisted of maize-autumn Chinese cabbage rotation. The testbed was composed of bare soil (bare), control (Cont.), furrow vegetation mulching (FVM), and furrow nonwoven fabric mulching (FFM) plots. Runoff was collected for each rainfall event with a 1/100 sampler, and the NPS load was calculated by measuring the concentrations of SS, T-N, and T-P. The NPS load was then analyzed for the entire monitoring and crop cultivation periods. During the monitoring period, the effect of reducing the NPS load was 1.5%~44.5% for FVM and 13.1%~55.2% for FFM. During the crop cultivation period, it was 1.2%~80.5% for FVM and 27.0%~65.1% for FFM, indicating that FFM was more effective than FVM. As the NPS load was fairly high during the crop conversion period, an appropriate management method needs to be implemented during this period.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1115-1123
• /
• 2008

When constructing projects such as road embankments, bridge approaches, dikes or buildings on soft, compressible soils, significant settlements may occur due to the consolidation of these soils under the superimposed loads. The compressibility of the soil skeleton of a soft clay is influenced by such factors as structure and fabric, stress path, temperature and loading rate. Although it is possible to determine appropriate relations and the corresponding material parameters in the laboratory, it is well known that sample disturbance due to stress release, temperature change and moisture content change can have a profound effect on the compressibility of a clay. The early research of Tezaghi and Casagrande has had a lasting influence on our interpretation of consolidation data. The 24 hour, incremental load, oedometer test has become, more or less, the standard procedure for determining the one-dimensional, stress-strain behavior of clays. An important notion relates to the interpretation of the data is the ore-consolidation pressure ${\sigma}_p$, which is located approximately at the break in the slope on the curve. From a practical point of view, this pressure is usually viewed as corresponding to the maximum past effective stress supported by the soil. Researchers have shown, however, that the value of ${\sigma}_p$ depends on the test procedure. furthermore, owing to sampling disturbance, the results of the laboratory consolidation test must be corrected to better capture the in-situ compressibility characteristics. The corrections apply, strictly speaking, to soils where the relation between strain and effective stress is time independent. An important assumption in Terzaghi's one-dimensional theory of consolidation is that the soil skeleton behaves elastically. On the other hand, Buisman recognized that creep deformations in settlement analysis can be important. this has led to extensions to Terzaghi's theory by various investigators, including the applicant and coworkers. The main object of this study is to suggestion the modified compression index value to predict settlements by back calculating the $C_c$ from different numerical models, which are giving best prediction settlements for multi layers including very thick soft clay.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.496-501
• /
• 2009

In this study, a kiwifruit-produced protease was used to improve the quality of the wool and silk fabrics. The wool and silk were treated with the actinidin from kiwifruit. Following this protease treatment, changes in the surface of a single yarn of the fabrics were observed via both an optical microscope and a scanning electron microscope (SEM). In order to determine the amount of dye uptake in the fabric, changes in the K/S value of the wool and silk were measured by spectrophotometric analysis. Also, we performed a tensile strength examination to determine variation in their mechanical properties. By increasing the protease treatment time to 48h, the dyeing properties of fabrics were enhanced, and the surfaces of the single yarns of the fabrics became smoother, because of the removal of soil and scale in them. However, no mechanical changes were detected in the fabrics. Thereby, we suggest that the kiwifruit-produced actinidin treatment can improve the quality of the fabrics.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.90-99
• /
• 2011

The aim of this study is to develope eco-printing method using natural pigments and chitosan as a natural binder. Three chitosans with different molecular weights were employed to find appropriate conditions including chitosan concentration and pigment/binder ratio. Dye uptake, color and fastnesses of the printed fabrics were evaluated to find optimum conditions within the range of experiments carried out in this study. The effectiveness of chitosan as a printing binder was examined in comparison with color, dye uptake, and fastnesses of conventional synthetic binder and guar gum. It was found that chitosans with low or medium molecular weight were appropriate. Using low molecular weight chitosan, optimum concentrations were 1.7% for charcoal, madder and chlorophyll, whereas 2.2% for ocher, yellow soil, indigo and cochineal. Regardless of molecular weight and concentration of chitosan, the color fastnesess of fabrics printed with mineral pigments were superior to those of the fabrics printed with plant and animal pigments. As pigment/chitosan ratio became higher, rubbing fastness was decreased by 1-3 grade. The colorfastness of printed fabric with chitosan binder was similar to that with synthetic binder, which was higher than that with guar gum.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.8 no.1
• /
• pp.39-45
• /
• 1984

The effects of Temperature on the removal of triglyceride were studied with soaps having various chain lengths of alkyl group. Cellophane, polyester film and alkali-treated polyester film were soiled with tripalmitin, tagged with 0" and detergency was evaluated by analysing the tripalmitine on the fabric before and after washing by means of liquid scintillation counting. The results were as following: 1) Triglyceride was completely removed from cellophane in distilled water without surfactant at any temperature, because of the hydrophillic nature of cellulose. The detergency of triglyceride from polyester film fully depended on the state of tripalmitin. The detergency of alkali treated polyester film was better than that of untreated polyester film at lower temperature due to increased hydrophillcity, but worse at higher temperature due to the diffusion of molten tripalmitin into the grooves, formed by alkali treatment. 2) The detergency from polyester film was increased with elevating temperature and after reaching some optimum detergencies, the detergencies were rather decreased with increasing temperature. The temperatures of optimum detergency were shifted to higher with increasing chain length of alkyl group. 3) When the soiled film was baked at $60^{\circ}C$ and $70^{\circ}C$ for 20 min, the detergency vs. temperature was much the same as the case of without-baking. These results indicate that the detergency of triglyceride was largely correlated with the suspending power of surfactants at low temperature and with state of soil and hydrophilicity of substrates with elevating temperature.

• Geomechanics and Engineering
• /
• v.1 no.3
• /
• pp.241-257
• /
• 2009

The one-dimensional compressibility of sand is an important property for the estimation of settlement or deformation of sand deposits. The $K_0$ value of sand is also an important design parameter. Experimental results are presented in this paper to study the compressibility of sand in $K_0$ consolidation tests. The $K_0$ consolidation tests were carried out using a triaxial cell and a plane-strain apparatus. Specimens prepared using both the moist tamping and the water sedimentation methods were tested. The testing data demonstrate that the type of testing apparatus does not affect the $K_0$ measurement if proper boundary conditions are imposed in the tests. The data also show that the compressibility and the $K_0$ value of loose sand specimens prepared using the moist tamping method are very sensitive to the variation of void ratio. The $K_0$ values measured from these tests do not agree with the $K_0$ values calculated from Jaky's equation. The compressibility and $K_0$ values of sand obtained from tests on specimens prepared using different preparation methods are different which may reflect the influence of soil fabrics or structures on the one dimensional compression behavior of sand.

• International Journal of High-Rise Buildings
• /
• v.9 no.3
• /
• pp.283-300
• /
• 2020

The Lakhta Center is a Multifunction Complex Development (MFCD) consisting of 1) an 86 story office tower rising 462 m above the ground to provide high-end offices for Gazprom Neft and Gazprom Group affiliates 2) a Multi-Function Building (MFB) that includes, a scientific/educational center, a sport center, a children's technopark, a planetarium, a multi-transformable hall, an exhibition center, shops, restaurants, and other public facilities 3) a Stylobate 4) "The Arch, which forms the main entrance to the tower, restaurants, and cafes 5) underground parking and 6) a wide range of large public plazas. While each of the MFCD buildings is technically challenging in its own right, the focus of the paper is to present the development and integration of the structural and foundation systems of the bowed, tapered, and twisted shape of the tower into the fabric of the tallest Tower in Europe.