• Korean Journal of Medicinal Crop Science
• /
• v.12 no.4
• /
• pp.285-288
• /
• 2004

This Study was carried out to select bed soil and growth regulator which are effective for the macro propagation by cutting of Cudrania tricuspidata Bureau. The rooting of Cudraniae tricuspidata showed good result when the bed soil was coarse soil, rooted hardwood cutting 56.9%, and softwood cutting 62.3%. The rooting of Cudraniae tricuspidata showed good result when treated by growth regulator IBA 100 ppm, rooted hardwood cutting 57.9%, and softwood cutting 89.2%.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.154-161
• /
• 2000

A series of soil bin experiment was carried to investigate the effects of rotary blade shape, rotational direction of rotary blade, number of blade and soil cutting disk blade on the characteristics of partial tillage. Among the three types of rotary blades, rotary blade for cultivator was considered to be proper for partial tillage of direct seeder considering the torque requirements and ratio of soil breaking. There is no need to attach so many blades to the rotary shaft. Four rotary blades were enough for efficient partial tillage by rotary tiller. Though soil cutting disk blade assisted the better formation of seedbed furrow, attachment of the soil cutting disk blade increased torque requirements.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.190-195
• /
• 2006

The purpose of this study was to figure out the best condition in growth and sod quality of Mentha spp. according to cutting methods and soil depth. Applemint (M. suaveolens), Peppermint (M. piperita), and Spearmint (M. spicata) were used. Regardless of cultivar and soil depth condition, the growth rate in top cutting was higher than layering method. The difference between layering and layering without apical meristem was not significant. Optimal condition for growth was 5cm depth of soil. However, the shallower the depth of the soil, the better quality of sod. Among three Mentha species, M suavelens showed plant height and node number and M. piperita had shoot number were higher than other variety. The best condition of sod was top cutting and 1cm depth of soil regardless of cultivar.

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.270-277
• /
• 2021

Veronica rotunda var. subintegra (Nakai) T. Yamaz. is perennial herb belonging to the family Scrophulariaceae, native to Korea. Plant growth regulators, cutting mediums, cutting position, and leaf size were examined to investigate the requirements for cutting propagation of V. rotunda var. subintegra. This study was conducted over a period of 6 weeks from March to May 2017 in the Division of Plant Resources, Korea National Arboretum. For all treatments, survival and rooting percentage was 100%. In PGRs experiment, the number of roots and shoot length treated with 100 mg/L IBA treatment was significantly higher than that of NAA treatment. The shooting percentage was decreased with an increase of the PGRs concentration. In growing substrates experiment, the number of roots on commercial soil (61.2) was the highest, followed commercial + kanuma soil (45.7), and the lowest was kanuma soil (41.8). The shoot length treated with commercial soil (8.9 cm) was significantly greater than that of kanuma soil (4.1 cm). In cutting positions experiment, the number of roots treated with apical (56.6) was significantly higher than that of basal (38.8). In leaf-cut experiment, the number of roots and of shoot length treated with full leaf was significantly higher than that of half leaf. As a result, we recommend treating cuttings with 100 mg/L IBA treatment, commercial soil, apical position, and full leaf for successful cutting propagation of V. rotunda var. subintegra.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Journal of Bio-Environment Control
• /
• v.16 no.2
• /
• pp.146-150
• /
• 2007

For autumn cutting of Sedum sarmentosum, the influences of bedsoil and cutting date were investigated. Among six kinds of bedsoils mixed upland soil, carbonized rice and sand, the mixture with upland soil and sand (1:1 and 2:1, v/v) showed excellent root and shoot growth. The mixtures with upland soil and carbonized rice were lower rooting than the mixture with upland soil and sand. In field condition, autumn cutting was conducted with $10{\times}5cm$ space using the mixture with upland soil and sand (2:1, v/v) at intervals of 10 days from September 1 to October 10. Both root and shoot growth were significantly decreased by delayed date. In cutting from early to middle September, root and shoot growth, and number of rosette before wintering were desirable for shoot production next spring. The safety date to autumn cutting before wintering was on September 20 in field condition. If autumn cutting is late than September 20, the number of scion has increased 25-30% to secure a full rosette before wintering. The results could provide the beneficial information for cutting propagation of S. sarmentosum under field condition in autumn.

• Tunnel and Underground Space
• /
• v.18 no.4
• /
• pp.289-299
• /
• 2008

Based on the case study on the causes for the failure of cutting slope composed of weathered rock and soil, the factors influencing the design of a cutting slope have been examined, This type of rock and soil is widely distributed on the region whose parent rock is granite. To analyze the stability of the cutting slope, the following series of progress has been conducted: (1) ground characterization by geological survey and ground investigation, (2) the safety factor examination by limit equilibrium analysis and numerical analysis and (3) the comparison and analysis of rainfall and failure history. As a result, the main factors to cause the failure is determined to be the decrease of shear strength in the upper parts whose ground condition is weakened during localized heavy rain. Moreover, the analysis indicates the failure is also closely related to the groundwater inflow path. On the base of this investigation, a reinforcement method is proposed to ensure the stability of the cutting slope.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.1
• /
• pp.31-34
• /
• 2006

The experiment was conducted to determine the effects of cutting interval and cutting height on the yield and nutrient composition of hedge lucerne (Desmanthus virgatus) when grown on a sandy soil in the Northeast of Thailand. The cutting intervals compared were 30, 40 and 50 days between harvests and the cutting heights 30, 40 and 50 cm above ground level. The experiment was a $3{\times}3$ factorial layout in a randomized complete block design with 4 replications-giving a total of 36 plots each $3{\times}3m^2$. Harvested plant material was weighed, dried and the ground subsamples taken for analyses of crude protein (CP), crude fiber (CF), ash, ether extract (EE) and nitrogen-free extract (NFE). At the last harvest the hedge lucerne samples were separated to determine leaf to stem ratios and then analyzed for nutrient composition in the leaf and stem. Results showed that increasing the cutting interval (i.e. advancing age of maturity) increased dry matter and nutrient yields significantly. In terms of nutrient content, it also increased the crude fiber, ash, ether extract and nitrogen free extract percent in the plant. However, crude protein percent was markedly decreased as the cutting interval increased. Increasing cutting height had no effect on dry matter yield and yields of nutrients, but in terms of nutrient content, it increased crude protein and ash content, but decreased crude fiber content. The percent EE and NFE in the plant was unaffected by cutting height. From the results presented it is clear that cutting a stand of hedge lucerne every 40 to 50 days will achieve greater dry matter and nutrient yields than cutting more frequently, at 30 days. The cutting height at harvest, whether 30, 40 or 50 cm above ground level had no effect on dry matter or nutrient yields of hedge Lucerne. Hedge lucerne therefore offers the Thai poultry farmer a useful alternative protein supplement for poultry diets rather than relying on the more expensive soybean meal. As it can be readily and successfully grown on a range of soil types and climates throughout Thailand, hedge lucerne also offers the Thai farmer a valuable additional source of income.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1063-1072
• /
• 1993

Current finite element analysis programs for soil cutting process with tillage tools require mainframe computers. Several special treatments in developing a microcomputer FEM program were introduced to increase the capacity for solving large problems and reducing the total time cost. The program was evaluated by solving one 3-D example on a 489 microcomputer. The results showed a close agreement with the laboratory soil bin test.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1088-1094
• /
• 1993

One of the important restraint conditions for determination of rotary tiller parameters is whether the outside of front cutting surface on blade in rotary tiller pushes untilled soil in operation. By theoretical analysis and graphic verification on computer, no sil-push conditions is put forward and formula for calculating the position angle of its bent line derived, as is convenient for selection of rotary tiller parameters and design and drawing of its blade.