• 제목/요약/키워드: soil consistency

검색결과 90건 처리시간 0.024초

델파이 기법과 AHP를 이용한 중력식 사방댐 준설 평가지표 및 조사야장 개발 (Development of Indicators for Dredging Evaluation and Form on Erosion Control Dam Using the Delphi Technique and AHP Analysis)

  • 서준표;이창우;우충식;이헌호
    • 한국환경복원기술학회지
    • /
    • 제17권6호
    • /
    • pp.1-15
    • /
    • 2014
  • A dredging on erosion control dam has been enforced without evaluation the factors that affect the dredging. In addition, there is the negative effect much more than positive effect by dredging on erosion control dam. Therefore, this study was carried out to develop evaluation indicators and to suggest fieldbook in order to determine whether sand deposits at erosion control dam should be dredged up or not. The most important six evaluation indicators that can decide to dredge up at erosion control dam were obtained from three round delphi technique and were selected in the following order: the current sand deposit ratio(0.339), existence of cultivated land and house downstream(0.276), the slope of streambed(0.162), the amount of movable soil and gravel(0.118), the history of any disasters(0.063), the basin area(0.043). The weighted score for each evaluation indicator were acquired from AHP analysis with respect to the degree of importance and then the modified weighted score for actual measurements were classified as three categories: large(2.53), medium(1.60) and small(1.01). Based on delphi technique, erosion control dam dredging evaluation fieldbook introduced the four evaluation indicators out of the total six evaluation indicators and two low effected evaluation indicators were excluded. This results showed that the values for reliability analysis and consistency ratio were acceptable.

말뚝 기초 고유진동수의 가속도 크기 의존성을 고려한 상사법칙 개발 (Development of the similitude law considering the intensity-dependent variation of natural frequency of pile foundation system)

  • 최정인;유민택;김성렬;김명모
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.905-912
    • /
    • 2009
  • 1-g shaking table test is conducted to evaluate the dynamic behavior of a soil-structure system under seismic loading condition. A consistent similitude law between the model and prototype is needed to predict the behavior of the prototype structure, quantitatively. The natural frequency of geomaterial decreases with the increase of shaking intensity because of the non-linear property of the geomaterial. This phenomenon affects the applicability of similitude laws in 1-g shaking table tests. In this study, a simple method is suggested to determine the frequency of the input motions in 1-g tests in order to enhance the applicability of similitude laws. Modified input frequency is calculated using the frequency ratio with consideration of the variation of the natural frequency according to the intensity of input ground acceleration. To verify the applicability of the suggested method, a series of 1-g shaking table tests were performed for three different sizes of model piles having an overburden mass on their heads by varying the acceleration and the frequency of input motion. The acceleration amplification ratio on the overburden mass, the lateral displacement at the pile head and the maximum bending moment along the pile depth were measured. The projected behaviors of the virtual prototype based on the measured values of the model tests, where the input frequencies were calculated by the new method, showed good consistency, verifying the applicability of the suggested method.

  • PDF

다중 매트릭스 분석 기법을 이용한 최적 건축공법 선정 의사결정지원 모델 (Decision Making Model using Multiple Matrix Analysis for Optimum Construction Method Selection)

  • 이종식;임명관
    • 한국건축시공학회지
    • /
    • 제16권4호
    • /
    • pp.331-339
    • /
    • 2016
  • 건축물의 고층화, 복합화, 대형화에 따라 다양한 공법이 개발되고 있어 주요 공종에 대한 공법 선정의 중요성이 대두되고 있다. 그러나 프로젝트의 특성을 충분히 고려하지 못하고 있고 주요 공법의 선정을 위한 객관적 기준이나 자료 또한 부족한 실정이며, 실무자의 경험과 직관에만 의존하여 선정이 이루어지고 있는 점이 지적되어 왔다. 이러한 문제점을 해소하기 위해 퍼지, AHP, CBR 등 인공지능이론을 이용한 주요 공종의 공법 선정을 위한 다양한 연구가 진행되었다. 그러나 실무에서 공법 선정 시 공종별 특성 및 현장별 조건을 고려하여 주요 공종마다 각기 다른 여러 가지 공법 선정 모델을 적용하기는 어렵다. 이에 본 연구에서는 매트릭스 분석과 선형변환을 이용하여, 실무에서 활용이 용이한 범용적인 성격의 의사결정지원 모델을 제시하고, 사례 연구를 통해 흙막이 공법 선정 과정에 적용하여 연구모델의 정합성을 검증하였다.

Effect of palm oil on the basic geotechnical properties of kaolin

  • Sriraam, Anirudh Subramanya;Raghunandan, Mavinakere Eshwaraiah;Ti, Tey Beng;Kodikara, Jayantha
    • Geomechanics and Engineering
    • /
    • 제18권2호
    • /
    • pp.179-188
    • /
    • 2019
  • This paper presents an experimental study to evaluate the effect of palm oil on the selected basic physical-chemical and geotechnical properties of kaolin. The experimental findings are further compared with literature outcomes investigating similar properties of fine grained soils subjected to contamination by different types of oils. To this end, palm oil was mixed with oven dried kaolin samples-aiding oil's interaction (coating) with dry particles first, in anticipation to emphasize the effect of oil on the properties of kaolin, which would be difficult to achieve otherwise. Oil content was limited to 40% by dry weight of kaolin, supplemented at intervals of 10% from clean kaolin samples. Observations highlight physical particle-to-particle bonding resulting in the formation of pseudo-silt sized clusters due to palm oil's interaction as evinced in the particle size distribution and SEM micrographs. These clusters, aided by water repellency property of the oil coating the kaolin particles, was analyzed to show notable variations in kaolin's consistency-measured as liquid and plastic limits. Furthermore, results from compaction tests indicates contribution of oil's viscosity on the compaction behavior of kaolin - showing decrease in the maximum dry unit weight (${\gamma}_{d,max}$) and optimum moisture content ($w_{opt}$) values with increasing oil contents, while their decrease rates were directly and inversely proportional in ${\gamma}_{d,max}$ and $w_{opt}$ values with oil contents respectively. Comparative study in similar terms, also validates this lower and higher decrease rates in ${\gamma}_{d,max}$ and $w_{opt}$ values of the fine grained soils respectively, when subjected to contamination by oil with higher viscosity.

탄성영역이 없는 J2-경계면 소성모델 (J2-bounding Surface Plasticity Model with Zero Elastic Region)

  • 신호성;오세붕;김재민
    • 대한토목학회논문집
    • /
    • 제43권4호
    • /
    • pp.469-476
    • /
    • 2023
  • 반복하중이나 동적하중에 대한 지반의 소성모델은 지반구조물의 비선형 수치해석에 매우 중요하다. 단일 항복면 모델은 반복하중에 대해 선형적 거동을 보이는 반면, 개발된 탄성영역이 없는 J2-경계면 소성모델은 동일한 물성치로 효과적으로 지반의 비선형성을 모사할 수 있다. 경계면 내부 항복면의 반경을 0으로 수렴시켜 탄성영역이 사라지도록 수식화하고, 소성경화 계수과 팽창률을 이용하여 소성변형 증분을 정의하였다. 개발된 모델의 응력-변형률 증분식을 제시하고, 쌍곡선 모델에 대한 소성경화 계수를 유도하였다. 삼축압축조건과 얕은기초의 반복하중에 대한 비교해석은 개발된 모델의 안정적인 수렴성, 이론식과의 일치성, 그리고 이력경로을 보여 주었다. 또한, 수정된 쌍곡선함수에 대한 소성경화 계수를 제시하여, 1차원 등가선형모델에 부합하는 모델변수 산정법을 제안하여 지반의 다차원 거동을 모델링할 수 있도록 하였다.

주요 영향요소를 고려한 쉴드TBM 터널 3차원 수치해석기법 연구 (Study on the 3 dimensional numerical analysis method for shield TBM tunnel considering key factors)

  • 전기찬;김동현
    • 한국터널지하공간학회 논문집
    • /
    • 제20권2호
    • /
    • pp.513-525
    • /
    • 2018
  • 쉴드TBM 터널을 대상으로 하는 3차원 수치해석은 gap, tail void, 세그먼트설치, 뒤채움재 주입 등과 같은 쉴드TBM 굴착의 여러 특성들을 고려하여 시공과정을 반영할 수 있는 해석이 수행되어야 한다. 그러나 기계 굴착의 특성을 고려하는 해석적 기법은 여러가지 기법들이 혼용되어 적용되는 것이 일반적으로 해석결과의 일관성과 신뢰도에 의문이 제기된다. 본 논문에서는 쉴드TBM 터널의 3차원 수치해석에 사용될 수 있는 여러 기법들을 대상으로 현장에서 실제 계측된 지표침하 데이터를 활용한 매개변수연구를 수행하였다. 그 결과 설계단계에서 지표침하와 막장압 등 터널주변지반의 거동을 유사하게 예측하고 평가하는데 활용할 수 있는 해석기법으로서 분석하고 정리하였다. skin plate 주면압, 뒤채움압과 soil model이 지표침하에 가장 큰 영향요소로 파악되었고, 응력제어기법은 해저터널과같이 굴착지반의 volume loss 정보를 얻을 수 없거나 지표침하나 막장압 등 터널 주변거동파악이 중요한 경우에 적용 가능한 것으로 판단되며, 설계자는 현장여건과 쉴드TBM의 특성이 반영된 합리적인 3차원 수치해석을 수행하는데 본 가이드라인을 기본자료로 활용될 수 있을 것으로 사료된다.

정확한 소성한계 측정을 위한 새로운 실험법 제안 (The proposal on the new method for accurate to measure the plastic limits)

  • 고재민;이병석
    • 한국산학기술학회논문지
    • /
    • 제19권6호
    • /
    • pp.68-79
    • /
    • 2018
  • 지반조사에서 지반재료 특성의 판단은 매우 중요하다. Casagrande는 재료적 특성을 이용하여 흙을 분류하였다. 액 소성한계 시험은 흙의 기본적인 정보를 얻기 유용하며 실트와 점토를 분류하는 효과적인 방법과 재료 특성인 전단강도, 수축, 팽창 등의 정보를 제공한다. 액성한계와 다르게 소성한계는 시험절차의 모호성으로 많은 지반 공학자 및 기술자들이 시험결과에 의문을 제기하고 있다. 이를 해결하기 위해 낙하에너지를 이용한 새로운 소성한계 측정법을 제안하였다. 본 연구에서는 새로운 소성한계측정법의 정확성을 검토하기 위하여 새로운 카올리나이트, 일라이트, 벤토나이트를 각각 일정비율로 혼합하고 국내 서해안 일대의 시료를 채취하여 소성한계 측정법을 종래 방법과 비교 하였다. 비교 실험을 통한 검토결과 새로운 시험법의 시험값은 기존의 thread rolling시험의 시험값의 오차 범위가 10%에서 약 2%의 차이로 시험의 재현성이 높으며 기존 소성한계 시험값의 기울기와 차이가 0.11519 ~ 0.1925로 거의 시험의 결과 값이 유사 또는 일치하고 있음을 알 수 있었다. 또한 새로운 시험법을 보다 간편하게 적용할 수 있도록 일점법을 제안하였다.

흙의 비배수전단강도가 0이 되는 함수비인 흐름한계의 제안 (A Proposal of Flow Limit for Soils at Zero Undrained Shear Strength)

  • 박성식;농쩐쩐
    • 한국지반공학회논문집
    • /
    • 제29권11호
    • /
    • pp.73-84
    • /
    • 2013
  • 사면 내 토사가 붕괴되거나 토석류가 발생하는 경우 파괴면에 작용하는 전단강도는 0에 가깝게 되면서 토사가 비점성 액체와 같이 유동한다. 점성토는 함수비 증가에 따라 그 연경도가 달라지며 액체상태로 바뀌는 액성한계에서 도 약간의 전단강도를 가진다. 본 연구에서는 점성토의 전단강도가 0이 되어 흐름을 유발하는 함수비를 찾고자 하였 다. 카올리나이트, 벤토나이트, 그리고 카올리나이트(50%)+벤토나이트(50%)와 같은 세 종류의 점토에 혼합수로 증류 수, 해수, 또는 미생물용액을 혼합하여 액성한계 상태로 만든 다음 함수비를 단계적으로 증가시키면서 토베인 시험기 를 이용하여 비배수전단강도를 측정하였다. 액성한계와 소성한계에서 비배수전단강도의 범위는 각각 3.6-9.2kPa와 24-45kPa 정도이었다. 한편 측정 결과로부터 비배수전단강도가 급격하게 변화하는 값에 해당하는 함수비를 흐름함수 비(Flow Water content)로 정의하였으며, 비배수전단강도가 0이 될 때의 함수비를 흐름한계(Flow Limit)로 정의하였다. 그리고 흐름한계와 액성한계의 상관관계를 살펴보기 위하여 흐름한계와 액성한계의 차이를 점성지수(Cohesive Index) 로 정의하였다. 또한 흐름한계와 소성한계의 차이를 새로운 소성지수(New Plasticity Index)로 정의하였으며, 흐름한계를 이용하여 새로운 액성지수(New Liquidity Index)도 정의하였다. 흐름한계(Flow Limit)는 액성한계보다 1.5-2배 정도 높은 값을 보였으며, 새로운 소성지수는 기존 소성지수보다 2-5.5배 정도 높았다.

점토와 모래의 혼합토의 정적 전단거동에 대한 세립분 함유율의 영향 (Effect of Fine Content on the Monotonic Shear Behavior of Sand-Clay Mixtures)

  • 김욱기;효도 마사유끼;백원진;안태봉
    • 한국지반공학회논문집
    • /
    • 제23권4호
    • /
    • pp.91-100
    • /
    • 2007
  • 대부분의 지반설계에 있어서 지반은 모래나 점토로 구분하며 각 지반의 거동에 따른 적절한 설계가 이루어지고 있다. 예를 들면, 사질토의 거동은 상대밀도로 나타내며, 점토의 거동은 연경도 등을 이용하여 나타낸다. 그러나 모래-점토 혼합토는 전형적으로 중간토로 구분되며 간단히 모래나 점토로 구분되지 않으므로 세립분 함유율이 낮은 사질토부터 세립분 함유율이 높은 점토에 대한 전이영역에서의 흙의 거동에 대하여 합리적인 해석이 필요하다. 본 연구에서는 활성을 가지고 있는 자연점토와 모래를 혼합하여 모래만으로 구성된 구조부터 세립분만의 구조에 이르기까지 다양한 세립분 함유율을 갖는 공시체를 제작하였다. 모래-점토 혼합토에 대한 세립분 함유율의 증가에 따른 전단특성을 명확하게 하기 위해 골격간극비에 착안하여 등방 및 이방압밀상태에서 전단실험을 수행하였다. 실험결과에서 모래-점토 혼합토의 정적전단강도는 골격간극비에 크게 의존하는 것으로 나타났다.

수도품종간(水稻品種間) 질소효율(窒素効率) 및 수종(數種) 생리적특성(生理的特性)과의 관계(關係) (Nitrogen Efficiency and its Relation to Various Physiological Characteristics among Rice Varieties)

  • 박훈;목성균
    • 한국토양비료학회지
    • /
    • 제8권2호
    • /
    • pp.105-111
    • /
    • 1975
  • 질소(窒素)의 정조생산효율(正租生産効率)(E)과 수량(收量)(Y) 수확지수(收穫指數)(HI) 질소전이율(窒素轉移率)(T) 질소흡수량(窒素吸收量)(N) 정조중(正租中)N농도(濃度)(GN%) 고중농도(藁中濃度)(SN%) 전건물생산량(全乾物生産量)(TY) 간(間)의 관계(關係)를 4개질소영양환경(個窒素營養環境)(고위지(高位地)와 저위지(低位地)에서 6 및 12kg 시비수준(施肥水準))에서 수도품종(水稻品種)(구(舊) 및 신품종(新品種)) 간(間)에 단순상관분석(單純相關分析)으로 조사(調査)하였다. 질소(窒素)의 전건물(全乾物) 생산효율(生産効率) (TE)을 포함 이상(以上)의 두 인자(因子)들간(間)의 관계(關係)를 분석(分析)하였다. 1. E는 T, Y, HI와 유의정상관(有意正相關), SN%, N 및 GN와는 행의상관(行意相關)을, TY와는 부상관(負相關) 경향(傾向)을 보였다. 2. T는 GN% 및 Y와 유의정상과나(有意正相關)을, SN%와는 유의부상관(有意負相關)을 보였다. 3. TE는 TY와 유의정상관(有意正相關)을 N와는 유의부상관(有意負相關)을 보였다. 4. 품종간(品種間) E의 순위(順位)는 서로 다른 질소영양(窒素營養) 환경(環境)에서 일정성(一定性)을 보였다. 5. 이상(以上)의 결과(結果)들로 다수품종(多收品種)은 고전이율(高轉移率)에 기인(基因)한 고질소효율(高窒素効率)을 갖고 띠라서 고중(藁中) N농도(濃度)가 낮으며 자실(子實)로 전류(轉流)된 N는 광합성산물(光合成産物)에 의(依)하여 크게 희석(稀析)되는 것으로 결론(結論)된다. 6. 최근육종(最近育種)된 이수성(多收性) IR 계통(系統)의 기보(旣報)된 생리적(生理的) 특성(特性)은 이 계통(系統)의 고질소효율(高窒素効率)과 잘 일치(一致)하였으며 수도육종(水稻育種)은 질소효율(窒素効率)에 기반(基盤)한 선발(選拔)로 진행(進行)되어왔다. 7. 고질소효율(高窒素効率) 품종(品種)은 생육후기(生育後期)에 효율(効率)이 큰 토양질소(土壤窒素)를 흡수(吸收)할 수 있도록 생육초기(生育初期)에 근생장(根生長)에 질소효율(窒素効率)이 클 것으로 추정(推定)된다.

  • PDF