• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.45-53
• /
• 1984

This experiment has been made to find out the influence of soil bulk density on growth and root development of Populus alba ${\times}$ P. glandulosa in Buyeo-kun, Chungnam. Bulk density and porosity significantly change according to slope position and soil depth and have a significant effect on tree height, DBH, biomass, and the distribution of root development. The results extracted from the experiments are as follows; 1) Bulk density in average changes from $1.17g/cm^3$ (1.05 ~ 1.40) in lower slope position to $1.43g/cm^3$ (1.36 ~ 1.60) in upper slope position, and porosity from 52.65% (55.05 ~ 45.50) in lower slope position to 41.20% (43.81 ~ 37.21) in upper slope position. 2) Bulk density increases significantly with soil depth. 3) Tree height, DBH, and total biomass decrease with bulk density. 4) Foliage, branch, bolewood, bolebark, and root also significantly have a negative correlation with hulk density. 5) Populus alba ${\times}$ P. glandulosa has a shallow root system chiefly distributing only in AI horizon, and critical bulk density is $1.43g/cm^3$. Therefore, slope position, hulk density, and porosity are considered to influence on the growth, biomass, and root development of Populus alba ${\times}$ P. glandulosa.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.2
• /
• pp.126-130
• /
• 1983

This study was desinged to find out the effects of soil physical properties on root development of barley. Barley fields were selected in consideration of drainage class and texture. Soil hardness were measured at the field. Soil bulk density, air ratio and root distribution were obtained from the core samples. 1. The amount of roots were increased and the root were distributed deeper layers with better drainage class and finer soil texture. 2. Soil hardness was related to soil bulk density, and the regression coefficient was increased with clay content (Clay ; $r=0.837^{**}$, Clay loam ; $r=0.678^*$, and Sandy loam ; $r=0.654^*$). 3. There was a highly negative correlation ($r=-0,846^{**}$) between bulk density of subsoils and amount of roots and the root developments were markedly reduced in soil bulk density of $1.4g/cm^3$. 4. Bulk density of subsoils was decreased with worse soil drainage and finer texture. Especially, in case of clayey soil at imperfectly or moderately drained soils, the air phase was less than 20% and the barley growth was worse. 5. Root development were related to hardness in surface, bulk density and ok phase in 10-30cm layer, and air phase in 30-50cm layer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.3
• /
• pp.235-241
• /
• 2016

The soil does not only serve as a medium for plant growth but also for engineering construction purposes. It is very weak in tension, very strong in compression and fails only by shearing. The behaviour of the soil under any form of loading and the interactions of the earth materials during and after any engineering construction work has a major influence on the success, economy and the safety of the work. Soils and their management have therefore become a broad social concern. A limitless variety of soil materials are encountered in both agronomy and engineering problems, varying from hard, dense, large pieces of rock through gravel, sand, silt and clay to organic deposits of soft compressible peat. All these materials may occur over a range of physical properties, such as water contents, texture, bulk density and strength of soils. Therefore, to deal properly with soils and soil materials in any case requires knowledge and understanding of these physical properties. The desired value of bulk density varies with the degree of stability required in construction. Bulk density is also used as an indicator of problems of root penetration,soil aeration and also water infiltration. This property is also used in foundation engineering problems. While not conforming to standard test procedures, this work attempts to add to the basic information on such important soil parameters as water content, bulk density.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.6
• /
• pp.50-59
• /
• 2014

This experiment was performed in order to study the relationship between physical properties of soil and the growth characteristics of Sedum reflexum. A correlation analysis and multiple regression analysis were performed using SPSS Ver 19.0 for Windows. The multiple regression analysis results of soil physical properties and growth characteristics were as follows. The regression equation: The length=$.993-14.070^*$(soil bulk density)+$.233^*$(solid phase)+$.038^*$(liquid phase)+$.068^*$(permeability). The significance of soil bulk density and solid phase was great. The width=$2.931-33.925^*$(soil bulk density)+$.566^*$(solid phase)+$.206^*$(liquid phase)+$.027^*$(permeability). The significance of soil bulk density and solid phase was great. The wet weight and dry weight of the upper and lower and soil physical properties did not have a direct relationship.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.3
• /
• pp.226-233
• /
• 1997

To investigate the salt accumulation in the plastic film house soils, bulk density, electrical conductivity(EC), exchangeable canons and water soluble anions were determined at different depths(0~60cm) in the salt-accumulated plastic film house soils in Yesan, Chungnam, Korea. Bulk density were increased from $1.2Mg/m^3$ to $1.5Mg/m^3$ as the depth changed from 0cm(top soil) to 30cm(subsoil) below the soil surface, whereas the bulk densities between 30cm to 60cm slightly decreased to $1.42Mg/m^3$. These changes of soil bulk densities might influence the porosity and pore size distribution, resulting in affecting the water flow throughout, soil layers. Electrical conductivity and Exchangeable sodium percentage(ESP) for 0 to 10cm soil layer were 5.08 dS/m and 6.4, respectively, while the EC was decreased to less than 1.63 dS/m in 20~30cm depth and about 0.7 dS/m. Salt accumulation patterns in the plastic film house soils might be influenced by the changes of the bulk densities in soil.

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.127-135
• /
• 1978

For improvement and new design of tillage equipments, indoor test is very useful and more desirable than outdoor because the experiment of outdoor is very difficult and its cost is expensive. This study was carried out to determine the physical properties of artificial soil suitable for the indoor test with the soil bin manufactured at the workshop of the Dept. of Agricultural Machinery Engineering. The artificial soil being studied was made with very similarity to the natural soil of the experimental plots of Chungnam National University, and it consist of 39.35 percent, by weight of bentonite and 48.10 percent of sand with 12.55 percent of SAE 10W oil. The results are summarized as follows: 1. Bulk density increased with increasing number of rolling, and its relationship could be expressed. $y=1.073200+0.070780x-0.002263x^2$ where, y=bulk density ($g/cm^3$), x=number of rolling. These results could be explained that the effect of rolling velocity on the bulk density was not singnificant in the range of 4.5~10.4 em/sec. 2. The absolute soil hardness depended directly upon number of rolling, and their relationship could be expressed by the equation. $y=37.74(0.64 +0.17x-0.0054x^2)/(3.36-0.17x-0.0054x^2)^3$. where, y=absolute soil hardness($kg/cm^3$), x=number of rolling. 3. Relationship between the bulk density and absolute soil hardness could be expressed by the equation; $y=37.74(2.46x-2.02)/(6.02-2.46x)^3$. where, y=absolute soil hardness, x=bulk density. 4. The cohesion and the angle of internal friction of artificial soil were increased with increasing its bulk density. According to the cohesion and angle of internal friction, at the range of 1.60~1.75 ($g/cm^3$) of bulk density, this artificial soil was similar with sandy loam of 29.5% moisture content of natural soil. 5. Sliding-fricfion coefficient of steel plate on the artificial soil was 0.3~0.4 and rubber plate on it is 0.64~0.72. Those values were very similar with those of natural soil being studies by many others.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.793-797
• /
• 2010

The investigations were conducted to improve the physical properties by analyzing physico-chemical properties on the different soil families of textures at 20 upland fields located in the parts of Gyengsangbuk-do area. Soil physico-chemical properties were analyzed for bulk density, hardness, porosity, moisture, pH, EC and organic mater by soil depth on the different soil families of textures. Bulk density distributions were higher than 1.2 Mg $m^{-3}$ in the optimum range. Hardness distributions were lower than 20 mm in the optimum range. Therefore, the physical properties of upland soil was deteriorated. Correlation coefficient of bulk density with hardness and organic mater were higher significantly, that was positive and negative, respectively. The soil hardness had the greatest distribution degree to the crop yield and bulk density and organic matter followed. Conclusively, To improve the physical properties of upland soil was more effective to fertilizing organic matter than other ways.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.6
• /
• pp.79-88
• /
• 1998

This study was conducted to measure the moisture content of soil using RF impedance in the range of 1 to 30MHz. Considering the water potential flow in the soils, two types of sensor such as parallel cylinder and perpendicular plate type were fabricated and tested. The capacitance and resistance of sonsors for soil samples having moisture content range of 2 to 27% were measured by Q-meter (HP4342). The higher soil moisture content was and the larger soil bulk density was, the more the capacitance of sensors increased. To eliminate the effect of bulk density on measuring soil moisture content using RF impedance, two kinds of model having the density independent functions such as the ratio of capacitance change to conductance change and weight of water and dry soils respectively were developed and estimated by regression analysis.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.3
• /
• pp.234-241
• /
• 1997

The effects of bulk densities(${\rho}_b$) on saturated hydraulic conductivity (Ksat) and solute elution patterns were investigated from five different bulk densities ranging from $1.1Mg/m^3$ to $1.5Mg/m^3$ with each increment of $0.1Mg/m^3$. The hydraulic conductivities observed were divided into two stages: (1) a linearly decrease with increase in bulk density up to $1.4Mg/m^3$, (2) a steady state where the bulk density is greater than $1.4Mg/m^3$. Using the saturated hydraulic conductivity at the steady state, we figured out the equation describing the correlation between bulk densities(${\rho}_b$) and saturated hydraulic conductivity(Ksat) as follows: $Ksat=-19.2({\rho}_b{^2})+6{\rho}_b+15.5$, (r=0.985). Electrical conductivity(EC) measured from the leachate of the soil column showed that EC at the same pore volume were decreased with an increase in the bulk density from $1.2g/cm^3$, $1.5g/cm^3$, as shown in the time taken to collect the same pore volume at each respective bulk density. The maximum relative concentrations (C/Co=1) from the breakthrough curves for the anions of $Cl^-$, $NO_3{^-}$ and $SO_4{^{2-}}$, which are weakly adsorbed on the soil particles, moved to the right of the graph, while a distinctive retardation occurs at the bulk density between $1.3Mg/m^3$ and $1.4Mg/m^3$. The time taken to recover about 90% of indigenous sulphate was approximately twice as those of chloride and nitrate, resulting in slightly stronger adsorption characteristics for sorption sites on the soil surface. Thus, we can conclude that the salt accumulation in green house soil might be significantly influenced by it's bulk density at the soil depth, as well as the adsorption capacity of ions for the sorption sites in soils.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.344-352
• /
• 2012

Soil physical properties determine soil quality in aspect of root growth, infiltration, water and nutrient holding capacity. Although the monitoring of soil physical properties is important for sustainable agricultural production, there were few studies. This study was conducted to investigate the condition of soil physical properties of arable land according to land use across the country. The work was investigated on plastic film house soils, upland soils, orchard soils, and paddy soils from 2008 to 2011, including depth of topsoil, bulk density, hardness, soil texture, and organic matter. The average physical properties were following; In plastic film house soils, the depth of topsoil was 16.2 cm. For the topsoils, hardness was 9.0 mm, bulk density was 1.09 Mg $m^{-3}$, and organic matter content was 29.0 g $kg^{-1}$. For the subsoils, hardness was 19.8 mm, bulk density was 1.32 Mg $m^{-3}$, and organic matter content was 29.5 g $kg^{-1}$; In upland soils, depth of topsoil was 13.3 cm. For the topsoils, hardness was 11.3 mm, bulk density was 1.33 Mg $m^{-3}$, and organic matter content was 20.6 g $kg^{-1}$. For the subsoils, hardness was 18.8 mm, bulk density was 1.52 Mg $m^{-3}$, and organic matter content was 13.0 g $kg^{-1}$. Classified by the types of crop, soil physical properties were high value in a group of deep-rooted vegetables and a group of short-rooted vegetables soil, but low value in a group of leafy vegetables soil; In orchard soils, the depth of topsoil was 15.4 cm. For the topsoils, hardness was 16.1 mm, bulk density was 1.25 Mg $m^{-3}$, and organic matter content was 28.5 g $kg^{-1}$. For the subsoils, hardness was 19.8 mm, bulk density was 1.41 Mg $m^{-3}$, and organic matter content was 15.9 g $kg^{-1}$; In paddy soils, the depth of topsoil was 17.5 cm. For the topsoils, hardness was 15.3 mm, bulk density was 1.22 Mg $m^{-3}$, and organic matter content was 23.5 g $kg^{-1}$. For the subsoils, hardness was 20.3 mm, bulk density was 1.47 Mg $m^{-3}$, and organic matter content was 17.5 g $kg^{-1}$. The average of bulk density was plastic film house soils < paddy soils < orchard soils < upland soils in order, according to land use. The bulk density value of topsoils is mainly distributed in 1.0~1.25 Mg $m^{-3}$. The bulk density value of subsoils is mostly distributed in more than 1.50, 1.35~1.50, and 1.0~1.50 Mg $m^{-3}$ for upland and paddy soils, orchard soils, and plastic film house soils, respectively. Classified by soil textural family, there was lower bulk density in clayey soil, and higher bulk density in fine silty and sandy soil. Soil physical properties and distribution of topography were different classified by the types of land use and growing crops. Therefore, we need to consider the types of land use and crop for appropriate soil management.