• 제목/요약/키워드: softwood species

검색결과 108건 처리시간 0.028초

조릿대의 종합적 활용을 위한 조릿대 섬유 특성 평가 (Evaluation of Characteristics of Sasa quelpaertensis Nakai Stem for the Comprehensive Utilization)

  • 성용주;김동성;이지영
    • 펄프종이기술
    • /
    • 제44권5호
    • /
    • pp.1-7
    • /
    • 2012
  • Chemical composition, morphological properties and papermaking properties of Sasa quelpaertensis Nakai were investigated in order to use it comprehensively. The lignin contents of stalks and leaves were 18.8% and 15.3% and the holocellulose contents were 63.3% and 48.6% respectively. The contents of ash and the amount of water extract showed the higher value than those of wood or other bamboo species. The average fibers length and width of Sasa quelpaertensis Nakai were 780 ${\mu}m$ and 14.8 ${\mu}m$. The fibers of Sasa quelpaertensis Nakai stalk had thinner width and more slender structure than those of softwood. The handsheet made of Sasa quelpaertensis Nakai alkaline pulp showed higher in tensile strength and bulkier structure than those of handsheet made of soft wood unbleached kraft pulp.

Factors Affecting Lumber Conversion Rate of Sawmill Industry in South Korea

  • Yang, In;Lee, Seong Youn;Joo, Rin Won;Youn, Yeo-chang
    • 한국산림과학회지
    • /
    • 제96권2호
    • /
    • pp.197-202
    • /
    • 2007
  • This study is conducted to investigate the factors affecting lumber conversion rate of sawmill industry in South Korea. Data were obtained from the survey of 38 sawmills in all geographic regions of South Korea. The variables examined in this study were region, softwood/hardwood log, domestic/imported/both log, the number of power-driven carriages (PDC) installed, the year when and country where PDCs was manufactured, the horse power of PDC, the number of labors required to operate each PDC, the sawing capacity of mill (mill size), and the types of major product and by-products. The lumber recovery factor (LRF) of sawmills were significantly influenced by the origin of logs, level of PDC automation, sawmill size, and size of logs (measured in diameter and length) while not by the location of the mill, types of major product and by-product, log species, and characteristics of PDC. Although these results provide useful information for understanding the technological characteristics of the Korean sawmill industry, further investigation with larger sample is necessary to reveal the more reliable characteristics of sawmill industry in South Korea.

초음파침지처리에 의한 목재방부제의 주입성 (Penetrating Performance of Wood-preservatives by Ultrasonic Steeping)

  • 이명재;이동흡;이현미;손동원
    • Journal of the Korean Wood Science and Technology
    • /
    • 제33권3호통권131호
    • /
    • pp.64-71
    • /
    • 2005
  • 본 실험에서는 초음파의 특성을 이용하여 목재를 방부처리하고 그 주입효과에 대해 검토하고자 하였다. 유용성 방부제인 NCU (나프텐산 구리)와 수용성 방부제 AAC (알킬암모늄 화합물)에 소나무 및 잣나무 시편을 침지한 후 40 kHz, 400 W 출력의 초음파를 발진시켰다. 초음파처리 이후 시편의 흡수율 및 침윤도는 시간 경과에 따라 지속적으로 증가하여 120시간 경과 후 AAC처리 잣나무, 소나무 모두에 대해 약 95%의 흡수율을 얻을 수 있었으며, 소나무 및 잣나무 각 시편 두께의 95, 83%에 해당하는 NCU의 침윤도를 얻을 수 있었다. 초음파 처리후의 시편을 SEM을 이용해 관찰하였으며, 초음파 발생에 의해 생성된 고온, 고압의 충격파가 목재 내 약액의 주입통로가 되는 벽공구를 파괴하고 초음파의 탈포작용과 목재내 추출물의 배출 등에 기인하여 약액의 주입성능이 향상된 것으로 판단된다. 초음파 처리에 의한 방부제의 주입은 가압방부처리의 적용이 어려운 소재, 단판 등에 적용이 가능할 것으로 판단된다.

국산 주요 수종 및 목질재료 탄화물의 흡착 특성(II) (Adsorption Characteristics of Charcoal from Major Korean Wood Species and Wood-based Materials (II))

  • 이동영;김병로
    • Journal of the Korean Wood Science and Technology
    • /
    • 제39권4호
    • /
    • pp.281-290
    • /
    • 2011
  • 본 연구에서는 한국산 주요 수종의 간벌재 및 목질재료의 탄화물로의 개발을 위해 이들을 탄화하여 기본물성 및 흡착 특성을 분석하였다. 탄화수율은 모든 수종과 목질재료에서 탄화온도 상승과 함께 감소했다. 정련도는 $400^{\circ}C$에서는 9.0, $600^{\circ}C$에서는 3.3~5.0, $800^{\circ}C$에서는 0으로 나타났고, 수종 간 차이가 적은 것으로 나타냈다. 고정탄소량은 탄화온도가 상승함에 따라 증가하였으며, 수종 간은 침엽수재 탄화물이 활엽수재 탄화물 보다 높은 경향을 보였다. 비표면적은 탄화온도가 증가할수록 증가하였고, 수종 간 비표면적은 침엽수재가 활엽수재 탄화물보다 높게 나타났으며, 리기다소나무 탄화물이 733.9 $m^2$/g으로 가장 높은 비표면적을 나타내다. 포름알데히드 제거율은 탄화 온도 간에는 탄화온도가 증가할수록 높았으나 600과 $800^{\circ}C$ 사이에서는 $600^{\circ}C$가 높은 것과 $800^{\circ}C$가 높은 것이 공존해 나타났고, 수종 간은 잣나무, 졸참나무 및 MDF 탄화물이 $600^{\circ}C$에서 높은 제거율을 나타냈다. 에틸렌가스 제거율은 탄화온도가 증가할수록 높은 제거율을 나타났고, 수종 간에는 리기다소나무, 아카시나무 탄화물이 가장 높은 제거율을 나타낸다.

Polyethylene Glycol의 분자량(分子量)이 목재(木材)의 치수 안정화(安定化)에 미치는 영향(影響) (Effects of Molecular Weight of Polyethylene Glycol on the Dimensional Stabilization of Wood)

  • 전철;오정수
    • 한국산림과학회지
    • /
    • 제71권1호
    • /
    • pp.14-21
    • /
    • 1985
  • 본(本) 연구(硏究)는 목재(木材) 고유(固有)의 특성(特性)인 흡습성(吸濕性) 및 수축(收縮), 팽창(膨脹)의 이방성(異方性)에 의한 목재(木材) 자체(自體) 및 목제품(木製品)의 가치(價値) 저하(低下)를 방지(防止)하고 목재(木材)의 천연적(天然的)인 아름다운 무늬를 살려 더욱 목재(木材)의 효용가치(効用價値) 높이 기 위하여 비교적(比較的) 가격(價格)이 싸고 독성(毒性)이 없을 뿐만 아니라 주입처리(注入處理)가 용역(容易)한 PEG를 이용(利用)한 목재(木材)의 치수 안정화(安定化) 기술(技術)을 개발(開發)하기 위한 일환(一環)으로 PEG 분자량별(分子量別)(200, 400, 600, 1000, 1500, 2000, 4000, 6000) 및 수종별(樹種別)(Pinus densiflora S. et Z., Larix leptolepis Gordon., Cryptomeria japonica D. Don., Cornus controversa Hemsl., Quercus variabilis Blume., Prunus sargentii Rehder.)로 치수 안정화(安定化) 효과(効果)를 조사(調査)하였던 바, 다음과 같이 요약(要約)될 수 있었다. 1) PEG 주입율(注入率)은 분자량(分子量) 400일 때 137.22%(Pinus densiflora)로 최대치(最大値)를 나타내었고 그 이후(以後)는 비교적(比較的) 완만(緩慢)하게 감소(減少)하는 경향(傾向)을 보여 주었으며 비중(比重)이 낮을수록 PEG 주입량(注入量)도 증가(增加)하는 것으로 밝혀졌다. 2) 부피 팽윤율(澎潤率)은 비중(比重)에 의한 영향(影響)을 별로 받지 않았으며 굴참나무가 분자량(分子量) 400~2,000에 이르기까지 12~18%의 범위(範圍)내에 분포(分布)한 것을 제외(除外)하고는 대부분(大部分) 분자량(分子量) 600일 때 가장 높은 값을 나타내었고, 일반적(一般的)으로 활엽수재(濶葉樹材)가 침엽수재(針葉樹材)보다 높은 부피 팽윤율(澎潤率)을 보여 주었다. 3) 부피 팽윤(澎潤) 감소율(減少率)은 수종(樹種)에 따라 약간의 예외(例外)는 있었으나 대부분이 PEG 분자량(分子量) 400에서 최대치(最大値)를 나타내었고 삼나무의 경우 95.09%로서 최대치(最大値)를 나타내었으며, 산벚나무를 제외(除外)하고는 모두 80% 이상(以上)을 나타내었지만 분자량(分子量) 1,000 이상(以上)에서는 팽윤(膨潤) 감소율(減少率)이 70% 이하(以下)로 떨어졌다. 4) 치수 안정화(安定化) 효율(效率)은 비중(比重)이 큰 활엽수재(濶葉樹材)가 침엽수재(針葉樹材)보다 월등하게 높았으며 전건비중(全乾比重)이 0.89인 굴참나무는 전(全) 분자량(分子量) 범위(範圍)에 걸쳐 부피 팽윤감소율(澎潤減少率)이 1.6 이상(以上)이었는데, 일반적(一般的)으로 분자량(分子量)이 작을수록 우수(優秀)하였으나 분자량(分子量) 4,000 이상(以上)에서는 별로 차이(差異)를 나타내지 않았다. 5) 이상(以上)과 같은 결과(結果)를 종합(綜合) 분석(分析)한 바 PEG 처리(處理)에 의한 치수 안정화(安定化)는 활엽수재(濶葉樹材)의 경우, 특(特)히 효율적(效率的)이며 비록 팽윤감소율(澎潤減少率)이 분자량(分子量) 400에서 가장 높은 수치(數値)를 나타내었지만 PEG 주입율(注入率), 부피 팽윤율(澎潤率), 팽윤감소율(澎潤減少率) 및 치수 안정화(安定化) 효율(效率)을 감안할 때 분자량(分子量) 200~1,500 사이의 것을 적절(適切)한 비(比)로 혼합(混合) 사용(使用)하는 것이 바람직한 것으로 사료(思料)되며, 실용화(實用化)를 위해서는 각 분자량(分子量)의 PEG 혼합비율(混合比率)에 따른 부피 팽윤율(澎潤率), 팽윤감소율(澎潤減少率) 및 치수 안정화(安定化) 효율(效率)에 대한 보다 집중적(集中的)인 연구(硏究)가 요구(要求)된다.

  • PDF

마이크로파 가열건조법에 의한 압축 구조용 목재의 방염 및 내구성 (Flame Resistance and Durability of Compressed Structural Wood through Microwave Heat Drying Method)

  • 임남기
    • 한국건축시공학회지
    • /
    • 제11권2호
    • /
    • pp.162-170
    • /
    • 2011
  • 침엽수 구조재인 S.P.F 수종을 마이크로파로 단시간에 급속 건조시켜 액상의 인산염계 방염약제에 시간별로 침지시킨 후 2차 마이크로파 가열을 한 다음 3.8cm의 두께에서 1cm를 압축시켜 방염 후 처리물품 시험과 내구성 시험을 실시한 결과 1차 마이크로파 적정 가열시간은 5kW에서 7분 동안 가열할 경우 목표 함수율(4~5%)을 만족하는 것으로 나타났다. 인산염계 방염약제에 침지, 건조 후 3kW로 9분 동안 가열시켜 연화된 상태에서 압축된 목재의 함수율 측정결과 시험편 모두 외부용 목재의 적정 함수율인 12~14%의 범위를 만족하는 것으로 나타났다 또한 압축된 목재의 방염후 처리물품 시험을 통한 방염성능은 방염약제에 30분간 침지된 시험편이 가장 우수한 것으로 나타났으며 압축된 목재의 성능 시험 결과 경도, 못뽑기 저항, 압축, 휨강도, 전단 강도 모두 약 2~3배 이상 역학적 특성이 향상되었다.

CuAz-3처리 리기다소나무 제재목을 이용한 구조용 집성재 성능 평가 (Performance of Structural Glulam Laminated with CuAz-3 Preservative Treated Lumber)

  • 김광모;엄창득;이상준
    • Journal of the Korean Wood Science and Technology
    • /
    • 제39권6호
    • /
    • pp.521-530
    • /
    • 2011
  • 구조용 집성재의 시장 수요가 확대되고 다양화되면서 교량이나 파고라와 같이 외기에 노출되는 조건에서 사용하기 위한 고 내구성 구조용 집성재에 대한 시장 요구가 증가할 것으로 예견된다. 따라서 본 연구는 국산 침엽수재로 제조되는 구조용 집성재에 적합한 방부처리 기술 및 기준을 개발하기 위한 목적으로 진행되었다. 본 연구에서는 방부처리된 국산 리기다소나무 제재목을 이용하여 구조용 집성재를 제조하고 제조 단계별 생산수율과 KS 품질기준 충족여부를 평가하였다. 방부집성재의 제조수율은 일반 집성재와 큰 차이를 나타내지 않았으며, 목재자원의 효율적인 활용을 위해서는 집성재 제조수율 향상방안과 함께 부산물에 대한 효율적 활용방안도 함께 검토되어야 한다. 리기다소나무 방부처리재의 경우 불균일한 방부약제 흡수량으로 인하여 구조용 집성재 제조용으로 적합하지 않은 것으로 확인되었으며, 집성재 제조 후에 유용성 방부제를 처리하는 방안에 대한 추가적인 검토가 요구되었다.

Anatomical Comparison of Compression, Opposite, and Lateral Woods in New Zealand Rimu (Dacrydium cupressinum Lamb.)

  • Eom, Young-Geun;Butterfield, Brian G.
    • Journal of the Korean Wood Science and Technology
    • /
    • 제29권3호
    • /
    • pp.1-13
    • /
    • 2001
  • Compression, lateral, and opposite woods in the stem and branch of rimu (Dacrydium cupressinum Lamb.), a softwood species indigenous to New Zealand, were described and compared in the anatomical aspects. Qualitatively, growth rings were wide in the compression wood, intermediate in the lateral wood, and narrow in the opposite wood. Tracheid transition from early wood to late wood was very gradual in the compression wood but was more abrupt in both the lateral and opposite woods. When viewed transversely, compression wood tracheids showed a roundish outline except at the growth ring boundary but lateral and opposite wood tracheids were angular to rectangular in outline. Intercellular spaces were occasionally detected in the compression wood except in the late wood at the growth ring boundary but were absent from both the lateral and opposite woods. Slit-like extensions of the bordered pit openings caused by the location of pit apertures within short and narrow helical grooves were observed in the compression wood tracheids but not in the opposite or lateral wood tracheids. In the compression wood tracheids, fine striations in the form of fine checks or grooves were observed on the lumen surfaces and the innermost $S_3$ layer of secondary wall was absent. In the tracheids of lateral and opposite woods, the $S_3$ layer was sometimes absent but occasionally highly developed. Cross-field pits in the compression wood appeared to be piceoid due to slit-like pit apertures but those in the lateral and opposite wood tracheids showed cupressoid to taxodioid. Quantitatively, compression wood tracheids were somewhat shorter than those of opposite or lateral wood in stem but not different from the opposite or lateral wood tracheids in branch. The walls were thicker in the compression wood than in the lateral or opposite wood. Uniseriate rays in the compression wood were fewer than in the lateral or opposite wood.

  • PDF

Effect of Water-impregnation on Steam Explosion of Pinus densiflora

  • Jung, Ji Young;Ha, Si Young;Yang, Jae-Kyung
    • Journal of the Korean Wood Science and Technology
    • /
    • 제47권2호
    • /
    • pp.189-199
    • /
    • 2019
  • This study addresses the biorefinery feedstock from Pinus densiflora. This raw material is a major tree species in the Republic of Korea; it is renewable, has cost-effective, and is readily available. In this study, steam explosion of P. densiflora was performed in a reactor at $225^{\circ}C$ and with 1 to 13 min reaction times with or without previous water impregnation. The combined severity factor (Ro), which is an expression relating the reaction temperature and reaction time used in the steam explosion treatment, ranged from 3.68 to 4.79. The influence of both impregnation and steam explosion conditions were investigated by examining color variations, chemical composition, and mass balance on the pretreated solids. The results showed that steam-exploded P. densiflora that was not impregnated with water exhibited significantly darker color (chroma 28.8-41.4) than water-impregnated and steam-exploded P. densiflora (chroma 18.8-37.3). The increased ${\alpha}$-cellulose and lignin contents were detected as the severity factor increased. Furthermore, the ${\alpha}$-cellulose and lignin contents in the non-impregnated/steam-exploded P. densiflora were higher than those in the water-impregnated/steam-exploded P. densiflora. However, the decreased holocellulose content was detected as the severity factor increased. In mass balance, the holocellulose yield from water-impregnated/steam-exploded P. densiflora was higher than that from the non-impregnated P. densiflora.

수목 정유의 생리활성에 관한 연구( I ) - 침엽수 잎 정유의 항균활성 - (Studies on Biological Activities of Woody Essential Oils( I ) - Antimicrobial Activity of Essential Oils from Coniferous Needles -)

  • 이성숙;강하영;최인규
    • Journal of the Korean Wood Science and Technology
    • /
    • 제30권1호
    • /
    • pp.48-55
    • /
    • 2002
  • 대표적인 침엽수인 소나무, 잣나무, 편백, 화백의 잎 정유를 사용하여 수목 정유의 항균활성에 관하여 조사하였다. 항진균활성은 배지점적법을 이용하여 목재부후균인 Gliocladium virens, Tyromyces palustris, Trametes versicolor를, 비부후성 열화균인 Rhizopus stolonifer를, 수목병원균인 Phomopsis albobestita, Endothia nitschkeii, Melanconis juglandis에 대하여, 그리고 항세균활성은 paper disc법과 탁도측정법을 이용하여 그람양성균인 Staphylococcus aureus, Streptococcus faecalis, Bacillus subtilis 및 그람음성균인 Escherichia coli에 대하여 검정하였다. 그 결과, 항진균활성은 편백이 가장 우수한 것으로 나타났으며 그 다음이 소나무와 잣나무로 목재부후균에 대해서는 소나무가 잣나무보다 높은 활성을, 수복병원균에 대해서는 잣나무가 소나무보다 높은 활성을 나타내었다. 그리고 화백 잎 정유가 가장 활성이 낮은 것으로 나타났다. 또한, 항세균활성은 항진균활성과 달리 소나무 잎 정유가 편백보다 높은 활성을 보였으며 그 다음이 잣나무 그리고 화백의 순이었다. 이러한 정유에 따른 항균 스펙트럼의 차이는 각 정유의 성분 변이와 이러한 성분들의 미생물에 대한 작용특이성에 기인하는 것으로 사료되었다.