• Journal of Convergence for Information Technology
• /
• v.9 no.7
• /
• pp.25-32
• /
• 2019

This paper proposes the method of an in-vehicle gateway to reduce the reprogramming time for the ECU (Electronic Control Unit). In order to reduce the reprogramming time, the gateway must prohibit transmitting messages, that are not related to reprogramming, to the destination CAN network, and no ECU should diagnose the DTC(Diagnostic Trouble Code) that indicates CAN communication error caused by prohibiting CAN messages by the gateway. Moreover, STmin, which are the minimum time between two consecutive CAN messages, should be minimized. In order to do this, this paper proposes the method that uses the link control command specified in UDS(Unified Diagnostic Services) and hardware based gateway functionality that are supported by the latest MCU(Micro Controller Unit). The proposed method is developed using TC275 based embedded system, and its results are presented.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.8
• /
• pp.323-330
• /
• 2019

In order to improve the level of the IT organization, CMMi played a lot of roles in improving the IT efficiency and quality step by step. In a university organization if you use a customized IT governance framework for the concept of CMMi, it will be a university IT governance to realize the vision of the university. In this paper, we propose Staged Framework for the university developed for applying to university with reference to this staged model of CMMi. The university has applied its own process step by step and it can be uses in the university field. So it can be applied to university IT plan and budget in compliance with not only the person in charge of IT service center but the person in charge of university headquarters. The staged framework is classified into the maturity and process of university IT project and suggests ways to apply it to the improvement of university IT system levels.

• Korean Journal of Remote Sensing
• /
• v.35 no.4
• /
• pp.573-587
• /
• 2019

A multi-temporal approach using remotely sensed time series data obtained over multiple years is a very useful method for monitoring land covers and land-cover changes. While spectral-based methods at any particular time limits the application utility due to instability of the quality of data obtained at that time, the approach based on the temporal profile can produce more accurate results since data is analyzed from a long-term perspective rather than on one point in time. In this study, a multi-temporal approach applying a multi-periodic harmonic model is proposed for classification of remotely sensed data. A harmonic model characterizes the seasonal variation of a time series by four parameters: average level, frequency, phase, and amplitude. The availability of high-quality data is very important for multi-temporal analysis.An satellite image usually have many unobserved data and bad-quality data due to the influence of observation environment and sensing system, which impede the analysis and might possibly produce inaccurate results. Harmonic analysis is also very useful for real-time data reconstruction. Multi-periodic harmonic model is applied to the reconstructed data to classify land covers and monitor land-cover change by tracking the temporal profiles. The proposed method is tested with the MODIS and GOCI NDVI time series over the Korean Peninsula for 5 years from 2012 to 2016. The results show that the multi-periodic harmonic model has a great potential for classification of land-cover types and monitoring of land-cover changes through characterizing annual temporal dynamics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.234-237
• /
• 2014

The increasing of Cloud Computing technology among several companies has been a key strategy for IT services to provide desirable IT solutions to consumers of cloud services. More attention is concentrated to these core technologies that enable cloud services and more particularly to the virtualization aspect. The accessibility to a larger number of users is possible because of the usage of the data-intensive, data management and data integrity. Unfortunately, those useful services are vulnerable to kind of attacks by hackers, thus the security of personal information is in critical situation. To solve this to leakage vulnerability, and with the proliferation of cloud services, the cloud service providers adopt a security system with firewall, antivirus software and a large number of virtualized servers and Host. In this paper, a variety of virtualization technologies, threats and vulnerabilities are described with a complement of different security solutions as countermeasures.

• Computers and Concrete
• /
• v.24 no.3
• /
• pp.193-206
• /
• 2019

Although concrete is the most widely used construction material, its deficiency in shrinkage and low tensile resistance is undeniable. However, the aforementioned defects can be partially modified by addition of fibers. On the other hand, possibility of adding waste materials in concrete has provided a new ground for use of recycled concrete aggregates in the construction industry. In this study, a constant combination of recyclable coarse and fine concrete aggregates was used to replace the corresponding aggregates at 50% substitution percentage. Moreover, in order to investigate the effects of fibers on mechanical and durability properties of recycled aggregate concrete, the amounts of 0.5%, 1%, and 1.5% steel fibers (ST) and 0.05%, 0.1% and 0.15% polypropylene (PP) fibers by volumes were used individually and in hybrid forms. Compressive strength, tensile strength, flexural strength, ultrasonic pulse velocity (UPV), water absorption, toughness, elastic modulus and shrinkage of samples were investigated. The results of mechanical properties showed that PP fibers reduced the compressive strength while positive impact of steel fibers was evident both in single and hybrid forms. Tensile and flexural strength of samples were improved and the energy absorption of samples containing fibers increased substantially before and after crack presence. Growth in toughness especially in hybrid fiber-reinforced specimens retarded the propagation of cracks. Modulus of elasticity was decreased by the addition of PP fibers while the contrary trend was observed with the addition of steel fibers. PP fibers decreased the ultrasonic pulse velocity slightly and had undesirable effect on water absorption. However, steel fiber caused negligible decline in UPV and a small impact on water absorption. Steel fibers reduce the drying shrinkage by up to 35% when was applied solely. Using fibers also resulted in increasing the ductility of samples in failure. In addition, mechanical properties changes were also evaluated by statistical analysis of MATLAB software and smoothing spline interpolation on compressive, flexural, and indirect tensile strength. Using shell interpolation, the optimization process in areas without laboratory results led to determining optimal theoretical points in a two-parameter system including steel fibers and polypropylene.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.2
• /
• pp.80-93
• /
• 2017

This study proposes a new scientific measurement method for damaged epigraph. In this new method, the Chinese characters are converted and coordinates are created for this measurement. This method is then used to decipher partially damaged characters from the parts of the coordinated characters that are damaged and intact. The Chinese characters are divided into 9 square parts by the position of their Chinese Radicals. The unknown characters are then compared and deciphered dependent upon the character shape in 9 square parts that have been created. This method is more scientific, accurate, and makes it easier to find related characters than deciphering through contexts, which is current method. When creating a new software based on this algorithm, it will be especially useful in deciphering an old manuscript or a epigraph that made ancient Chinese characters which are not currently in use. This study will also be helpful in deciphering semi-cursive styled or cursive styled epigraph, as well as semi-cursive styled or cursive styled damaged characters during follow-up research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1096-1103
• /
• 2019

Today the influence of digital video media grows bigger due to the development of information and telecommunication gradually and most of juveniles spend a number of image contents with their smart phones and computers. And they not only consume such image contents but also upload the videos they make at YouTube or Vimeo by recording and editing them by themselves. As we learned from such phenomenon, the education of media that uses and expresses the video in various environment such as making, reading and expressing video media is very important. The education of using the advance digital device and software of producing image contents is essential as current education of media cannot be discussed without that. This study treats the education of media based on the view point of education on image contents production. It discusses the education method that we can learn from the process of image contents production based on Non-Linear Editing System.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.5
• /
• pp.677-688
• /
• 2019

Objectives: The purpose of this study was to examine the perception of dental hospital accreditation and the awareness and practice of infection control in dental hygienists. Methods: A self-reported questionnaire was completed by 238 dental hygienists working at dental hospitals in Gwangju Jeonnam and analyzed from October 24, 2016 to September 22, 2017. Data were analyzed with the independent t-test, one-way analysis of variance, Pearson's correlation analysis, and multiple regression analysis using the Statistical Package for the Social Sciences software, version 21.0. Results: Compared to non-accredited dental hospitals, all three variables were high for accredited dental hospitals. In accredited dental hospitals, healthcare accreditation expectancy effects correlated to awareness (r=0.407) and practice (r=0.533) of infection control, and awareness of infection control correlated to its practice (r=0.725). In non-accredited dental hospitals, healthcare accreditation expectancy effects correlated to awareness of infection control (r=0.239), and awareness of infection control correlated to its practice (r=0.481). Accredited dental hospitals showed healthcare accreditation expectancy effects (${\beta}=0.258$) and awareness of infection control (${\beta}=0.556$), and non-accredited dental hospitals were influenced by the number of employees (${\beta}=0.567$) and awareness of infection control (${\beta}=0.376$). Conclusions: It is necessary to develop efficient and systematic infection control programs to improve the awareness and practice of infection control in dental hygienists and patient's safety in the clinical field.

• Computers and Concrete
• /
• v.24 no.2
• /
• pp.103-115
• /
• 2019

In this study, the strength and stiffness (EI) of wood-concrete composite beams for bridges with T-shaped cross section were evaluated. Two types of connectors were used: connectors bonded with epoxy adhesive and connectors attached to the wood just by pre-drilling (without adhesive). The connectors consisted of common steel bars with a diameter of 12.5 mm. Initially, the strength and stiffness (EI) of the beams were analyzed by bending tests with the load applied at the third point of the beam. Subsequently, the composite beams were evaluated by numerical simulation using ANSYS software with focus on the connection system. To make the composite beams, Eucalyptus citriodora wood and medium strength concrete were used. The slip modulus K and the ultimate strength values of each type of connector were obtained by direct shear tests performed on composite specimens. The results showed that the connector glued with epoxy adhesive resulted in better strength and stiffness (EI) for the composite beams when compared to the connector fixed by pre-drilling. The differences observed were up to 10%. The strength and stiffness (EI) values obtained analytically by $M{\ddot{o}}hler^{\prime}$ model were lower than the values obtained experimentally from the bending tests, and the differences were up to 25%. The numerical simulations allowed, with reasonable approximation, the evaluation of stress distributions in the composite beams tested experimentally.

• Genomics & Informatics
• /
• v.16 no.4
• /
• pp.34.1-34.9
• /
• 2018

Cirsium japonicum belongs to the Asteraceae or Compositae family and is a medicinal plant in Asia that has a variety of effects, including tumour inhibition, improved immunity with flavones, and antidiabetic and hepatoprotective effects. Silymarin is synthesized by 4-coumaroyl-CoA via both the flavonoid and phenylpropanoid pathways to produce the immediate precursors taxifolin and coniferyl alcohol. Then, the oxidative radicalization of taxifolin and coniferyl alcohol produces silymarin. We identified the expression of genes related to the synthesis of silymarin in C. japonicum in three different tissues, namely, flowers, leaves, and roots, through RNA sequencing. We obtained 51,133 unigenes from transcriptome sequencing by de novo assembly using Trinity v2.1.1, TransDecoder v2.0.1, and CD-HIT v4.6 software. The differentially expressed gene analysis revealed that the expression of genes related to the flavonoid pathway was higher in the flowers, whereas the phenylpropanoid pathway was more highly expressed in the roots. In this study, we established a global transcriptome dataset for C. japonicum. The data shall not only be useful to focus more deeply on the genes related to product medicinal metabolite including flavolignan but also to study the functional genomics for genetic engineering of C. japonicum.