• Journal of Pharmaceutical Investigation
• /
• v.20 no.2
• /
• pp.55-64
• /
• 1990

Soybean fatty acid, the largest byproduct in the production of soybean oil, was formulated for hand cream, oil in water emulsion base, to improve the suppleness and elasticity of skin. The stability of emulsion observed by a macroscopic method was used as a characteristic index for deciding an optimum formula of hand creams. The optimum formula of the most stable hand cream was obtained from polynomial regression equation, contour graphs and partial derivative graphs. The values of soybean fatty acid and stearyl alcohol in the obtained optimum formula were 9.75 and 14.75 w/w%, respectively, and sodium lauryl sulfate was not needed. Experimental value for the stability of hand cream prepared according to the optimum formula was 76,14 days, and the prediction value by computation method was 73.25 days. From the results of accelerated tests by elevated temperature, the stability of hand cream by optimum formula was 1.7 year at room temperature $(25^{\circ}C)$. The hand cream containing soybean fatty acid was found to be free of primary irritant substance to the skin by Draize technique.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.2
• /
• pp.131-136
• /
• 2002

As model waterborne acrylic coatings, mono-dispersed poly(butyl acrylate-methyl methacrylate) copolymer latexes of random copolymer and core/shell type graft copolymer were prepared by seeded multi-staged emulsion polymerization with particle size of $180{\sim}200$ nm using semi-batch type process. Sodium lauryl sulfate and potassium persulfate were used as an emulsifier and an initiator, respectively. The effect of particle texture including core/shell phase ratio, glass transition temperature and crosslinking density, and film forming temperature on the film formation and final properties of film was investigated using SEM, AFM, and UV in this study. The film formation behavior of model latex was traced simultaneously by the weight loss measurement and by the change of tensile properties and UV transmittance during the entire course of film formation. It was found that the increased glass transition temperature and higher crosslinking degree of latex resulted in the delay of the onset of coalescence of particles by interdiffusion during film forming process. This can be explained qualitatively in terms of diffusion rate of polymer chains. However, the change of weight loss during film formation was insensitive to discern each film forming stages-I, II and III.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.1
• /
• pp.79-90
• /
• 1998

One of the objectives of this study were to develop a process for manufacturing activated carbons from agricultural by-products(rice shells and saw dust) and another is to measure the iodine number, ash content and removal ratio of COD. The other is to compare those values with those of commercialized activated carbons. Agricultural by-products based activated carbons were manufactured through the steam-reaction method. A rotary kiln type furnace was used for both carbonization and activation. The optimum operating temperatures for carbonization and activation were $650^{\circ}C$ and $900^{\circ}C$, respectively. For the activated carbons produced under these conditions, the iodine number was 1,127mg/g. Especially, removal efficiency of COD was 61.5% for 40mg/L of wastewater and 30% for 150mg/L of SLS(Sodium Lauryl Sulfate).

• Bulletin of the Korean Chemical Society
• /
• v.19 no.10
• /
• pp.1036-1042
• /
• 1998

The preconcentration and determination of trace elements in water samples were studied by a solvent sublation utilizing dithizonate complexation. After metal dithizonates were formed, trace amounts of cadmium, cobalt, copper and lead were floated and extracted into small volume of a water-immiscible organic solvent on the surface of sample solution and determined in the solvent directly by GF-AAS. Several experimental conditions as formation condition of metal-dithizonate complexes, pH of solution, amount of dithizone, stirring time, the type and amount of surfactants, N2 bubbling rate and so on were optimized for the complete formation and effective flotation of the complexes. And also four kinds of light solvents were compared each other to extract the floated complexes, effectively. After the pH was adjusted to 4.0 with 5 M HNO3, 8.0 mL of 0.05% acetone solution of dithizone was added to 1.00 L water sample. The dithizonate complexes were flotated and extracted into the upper methyl isobutylketone (MIBK) layer by the addition of 2.0 mL 0.2% ethanolic sodium lauryl sulfate solution and with the aid of small nitrogen gas bubbles. And this solvent sublation method was applied to the analysis of real water samples and good results of more than 85% recoveries were obtained in spiked samples.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.17-40
• /
• 2000

Cytotoxicity assays using artificial skins have been proposed as in vitro alternatives to minimize animal ocular and dermal irritation testing. Accordingly, the responses of artificial skins to the well-characterized chemical irritants toluene, glutaraldehyde, and sodium lauryl sulfate (SLS), and the nonirritant polyethylene glycol were studied. The evaluation of the irritating and non-irritating test chemicals was also compared with the responses observed in human dermal fibroblasts and human epidermal keratinocytes grown in a monolayer culture. The responses monitored included an MTT mitochondrial functionality assay. In order to better understand the local mechanisms involved in skin damage and repair, the production of several mitogenic proinflammatory mediators, interleukin-l$\alpha$, 12-HETE, and 15-HETE, was also investigated. Dose-dependent increases in the levels of かIn and the HETEs were observed in the underlying medium of the skin systems exposed to the two skin irritants, glutaraldehyde and SLS. The results of the present study show that both human artificial skins can be used as efficient in vitro testing models for the evaluation of skin toxicity and for screening contact skin irritancy.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.1
• /
• pp.186-201
• /
• 2002

Fructan(Levan)은 식물체 및 미생물에서 발견되는 탄수화물로 이는 과당(fructose)이 $\beta$-2, 6 결합으로 연결되어 있는 polysaccaride 이다. 본 연구에서는 Fructan을 생성하는 미생물(Zymomonas mobilis)과 10% sucrose(기질), 1-2% 효모 추출물을 주성분으로 하는 배지를 사용하여 30-37$^{\circ}C$, pH 5.0-7.0에서 20-24시간 동안 배양한후 원심분리하여 균체를 제거하고 3배량의 알코올을 가하여 침전, 건조하여 얻은 Fructan의 화장품 원료로서의 가능성을 조사하였다. 보습효과에 있어서는 Hyaluronic acid와 유사하였으며, keratinocyte에 대한 세포증식 효과를 나타내었다. 또한 3-D culture에 의해 구축된 생인공 피부내에 0.05%의 sodium lauryl sulfate (SLS)를 사용하여 피부자극에 의한 초기 염증 반응을 유도한후 0.01mg/m1, 0.05mg/m1의 Fructan을 각각 처리하였을 때, SLS만을 처리한 생인공피부와 비교하여 세포증식효능을 보였고, SLS 자극물질로 유도된 전염증성 조절인자인 interleukin-l$\alpha$(IL-l$\alpha$)의 분비량을 조사 하였을때 0.01mg/ml, 0.05mg/ml의 Fructan을 처리한 생인공피부의 IL-l$\alpha$ 양이 Fructan을 처리하지 않은 것보다 상대적으로 감소하였다. 이러한 결과로 Fructan이 생인공 피부내 피부 세포의 증식효과를 나타낼 뿐만 아니라, 또한 피부자극물질에 의한 염증반응에 대해 자극완화효능이 있음을 알 수 있었다. 섬유아세포 및 동물을 이용한 안전성 시험에서도 독성이 없는 안전한 원료로 평가되었다.

• Archives of Pharmacal Research
• /
• v.22 no.2
• /
• pp.143-150
• /
• 1999

melatonin (MLT), N-acetyl-5-methoxytryptamine, is mainly secreted by the pineal gland. The ultraviolet (UV), infrared (IR) and 1H-NMR spectra of irradiated and non-irradiated MLT were measured, and phototoxicity tests of MLT, anthracence (positive control) and sodium lauryl sulfate (SLS, negative control) were performed. The methods employed include both in vitro test such as MTS assay using the human fibroblast cell and yeast growth inhibition assay using Candida albicans and in vivo method using the skin of guinea pig. UV absorption spectra and 1H-NMR spectra of MLT were changed by UVA (365 nm, 15 J/$\textrm{cm}^2$), but IR spectra of MLT were not changed. The fifty percent inhibitory concentration (IC50) ratio (UV-/UV+) of MLT was 10. The inhibition zone of irradiated-paper disks treated with MLT was not observed. According to the results of histophathological examination, no pathologic lesion was observed in the non-irradiated group, but slight degeneration of keratinocytes in the epidermis, homorrhage and vasodilation in dermis were observed in the irradiated group. These results indicated that the molecular structure of MLT is altered by UVA to unidentified photoproducts and a moderate phototoxicity of MLT is predicted.

• Archives of Pharmacal Research
• /
• v.26 no.8
• /
• pp.659-665
• /
• 2003

We have studied the effect of rhEGF on the buccal mucosal ulcer healing. rhEGF was rapidly degraded upon incubation with the hamster buccal mucosal homogenates; The degradation of rhEGF was significantly inhibited by sodium lauryl sulfate (SLS). Eudispert hv hydrogel and Polycarbophil 974P hydrogel were prepared for rhEGF delivery and their mucoadhesiveness was measured by the $Instron^R$ method. The mucoadhesive force of Eudispert hv was significantly greater than that of Polycarbophil 974P. Moreover, rhEGF in Eudispert hv hydrogel remained stable for about 2 months. To evaluate the ulcer healing effect of rhEGF, the buccal mucosal ulcer was induced in golden hamsters using acetic acid. At 24 h after administration of rhEGF/Eudispert hv hydrogel, the ulcerous area was decreased compared with rhEGF solution and, as a result, the curative ratio was $36.8\pm5.68$%. By the addition of SLS (0.5%) to Eudispert hv hydrogel, the curative ratio increased 1.5 times. The mechanism of the action was probably due to a combination of protection of the drug against proteases present in mucosa and prolongation of the release of rhEGF from the formulation at the site of action.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.449-458
• /
• 2016

Detergency and surface active properties of mixed anionic surfactants with amphoteric and nonionic were investigated. Sodium dodecyl sulfate (SDS) and ammonium dodecyl sulfate (ADS) as anionic surfactants and cocamidopropyl betaine (CAPB) as an amphoteric surfactant were used. Nonionic surfactants, which are butyl glucoside (BG), octyl glucoside (OG), decyl glucoside (DG), lauryl dimethylamine oxide (AO) and saponin were also used. To study the synergy effects of mixed SDS/ADS anionic surfactant systems, amphoteric and nonionic surfactants were added into the mixed anionic surfactants. Investigated properties of surfactant mixtures were critical micelle concentration (CMC), surface tension (${\gamma}$), wettability. In addition, based on these properties, detergency of each sample was examined. Surfactant mixtures are anionics (SDS/ADS), anionic/amphoteric/nonionic (SDS/ADS/CAPB/saponin), and anionic/nonionic (SDS/ADS/BG/saponin, SDS/ADS/OG/saponin, SDS/ADS/DG/saponin, and SDS/ADS/AO/saponin). With the addition of amphoteric and nonionic to mixed anionic surfactants, CMC and ${\gamma}$ were decreased. Addition of CAPB, which is amphoteric, showed the best property at CMC and ${\gamma}$. Furthermore, as the chain length of hydrocarbon in alkyl glucosides was increased, the CMC and ${\gamma}$ were enhanced. However, the wettability did not exactly match up with CMC and ${\gamma}$. The surfactant mixture, which contained DG, showed the best performance at wetting time. Detergency was measured at various temperatures ($15^{\circ}C$, $30^{\circ}C$, $50^{\circ}C$). The cleaning performance was enhanced by increasing washing temperature. Moreover, detergency was influenced by not only CMC and ${\gamma}$ but also wettability. Although CMC and ${\gamma}$ were not minimum at surfactant mixture that included DG, the best cleaning performance showed in that sample.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.349-354
• /
• 2000

Abstract A facultative alkalophilic gram-negative Vibrio metschnikovii strain RH530, isolated from the wastewater, produced several alkaline proteases (VAP) including six alkaline serine proteases and a metalloprotease. From this strain, high yielding YAP mutants were isolated by NTG treatment. The isolated mutant KS1 showed nine times more activity than the wild-type after optimization of the culture media. The production was regulated by catabolite repression when glucose was added to the medium. The effects of several organic nitrogen sources on the production of the YAP were investigated to avoid catabolite repression. The combination of 4% wheat gluten meal (WGM), 1.5% cotton seed flour (eSF), and 5% soybean meal (SBM) resulted in the best production when supplemented with 1% NaCl. The YAP showed a resistance to surfactants such as $sodium-{\alpha}-olefin$ sulfonate (AOS), polyoxy ethylene oxide (POE), and sodium dodecyl sulfate (SDS), yet not to linear alkylbenzene sulfonate (LAS). However, the activity of the YAP was restored completely when incubated with LAS in the presence of POE or $Na_2SO_4$. The YAP was stable in a liquid laundry detergent containing 6.6% SLES (sodium lauryl ether sulfate), 6.6% LAS, 19.8% POE, and stabilizing agents for more than two weeks at $40^{\circ}C$, but the stability was sharply decreased even after 1 day when incubated at $60^{\circ}C$. A washing performance test with the YAP exhibited it to be a good washing power by showing 51 % and 60% activity at $25^{\circ}C{\;}and{\;}40^{\circ}C$, respectively, thereby indicating that the YAP also has a good detergency at a low temperature. All the results suggest that the YAP produced from the mutant strain KSI has suitable properties for use in laundry detergents.rgents.