• Journal of Life Science
• /
• v.14 no.5
• /
• pp.882-890
• /
• 2004

Gap junction is a membrane structure facilitating the direct transmission of several ions and small molecules between two cells. It is also called an 'intercellular channel' to distinguish it from other well-known cellular channels (e.g. sodium and potassium channels). Gap junction channels are not passive conduits, rather the ion channels modulated by several stimuli including pH, calcium ion, voltage, and a chemical modification (mainly known as phosphorylation). Among them, the effects of voltage on the gating of gap junction channels have been well studied. Gap junction channels are more sensitive to the transjunctional potential ($V_j$) between two cells rather than the membrane potential($V_m$) between inside and outside the cell. In this review, I will summarize the general properties of gap junction channel and discuss the gating mechanism for the gap channels.

• Journal of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.17-24
• /
• 1963

The fundamental investigations of surface properties of scheelite were made by electrophoretic mobility adsorption and contact angle measurements, and results have been correlated with its floatability obtained by Hallimond tube flotation test. The role of the interfacial electrical condition on the adsorption of collectors on mineral surfaces is discussed with the flotation of scheelite. From electrokinetic measurements made on scheelite, $Ca^{++}$ and $WO_4^{--}$ are identified to act as potential-determining ions, thus controlling the surface properties on this mineral. Therefore, at the fixed pH, the scheelite surface become to be less negatively charged with increasing $Ca^{++}$ concentration and more negatively charged with increasing $WO_4^{--}$ concentration in the pulp. Adsorption of collectors then depends strongly on the concentration of $Ca^{++}$ or $WO_4^{--}$ in the solution; anionic collectors are adsorbed on less negatively charged surfaces and cationic collectors on more negatively charged surfaces, which in turn defines the effective flotation range with respective collectors for this mineral.

• Korea-Australia Rheology Journal
• /
• v.14 no.3
• /
• pp.129-138
• /
• 2002

A cationic surfactant, cetyltrimethylammonium $\rho$-toluenesufonate (CTA$\rho$TS), forms long threadlike micelles in aqueous solution. The threadlike micelles make concentrated entanglement networks, so that the solution shows pronounced viscoelastic behavior as concentrated polymer systems do. However, a mechanism for a process responsible for the longest relaxation time of the threadlike micellar system is different from that of semi-dilute to concentrated polymer systems. The threadlike micellar system exhibits unique viscoelasticity described by a Maxwell model. The longest relaxation time of the threadlike micellar system is not a function of the concentration of CTA$\rho$TS, but changes with that of $\rho$-toluenesufonate ($\rho$$TS^{-}$) ions in the bulk aqueous phase supplied by adding sodium $\rho$-toluenesulfonate (NapTS). The rates of molecular motions in the threadlike micelles are not influenced by the concentration of $\rho$$TS^{-}$ anions, therefore, molecular motions in the threadlike micelles (micro-dynamics) are independent of the longest relaxation mechanism (macro-dynamics). A nonionic surfactant, oleyldimethylamineoxide (ODAO), forms long threadlike micelles in aqueous solution without any additives. The aqueous threadlike micellar system of ODAO also shows Maxwell type viscoelastic behavior. However, the relaxation mechanism for the longest relaxation process in the system should be different from that in the threadlike micellar systems of CTA$\rho$TS, since the system of ODAO does not contain additive anions. Because increase in the average degree of protonation of head groups of ODAO molecules in micelles due to adding hydrogen bromide causes the relaxation time remarkably longer, changes in micro-structure and micro-dynamics in the threadlike micelle are closely related to macro-dynamics in contrast with the threadlike micellar system of CTA$\rho$TS.

• Journal of Pharmacopuncture
• /
• v.17 no.1
• /
• pp.44-50
• /
• 2014

Objectives: This study was undertaken to isolate a fibrinolytic enzyme from the snake venom of Gloydius blomhoffii siniticus and to investigate its enzymatic characteristics and hemorrhagic activity as a potential pharmacopuncture agent. Methods: The fibrinolytic enzyme was isolated by using chromatography, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and fibrin plate assay. The characteristics of the enzyme were investigated using fibrin plate assay, protein hydrolysis analysis, and hemorrhage assay. Its amino acid composition was determined. Results: The fibrinolytic enzyme with the molecular weight of 32kDa (FE-32kDa) from Gloydius blomhoffii siniticus showed a fibrin hydrolysis zone at the concentration of 0.2 mg/mL in the fibrin plate assay. The fibrin hydrolysis activity of the enzyme was inhibited completely by ethylenediaminetetraacetic acid (EDTA), ethyleneglycoltetraacetic acid (EGTA), and 1, 10-phenanthroline, thiothreitol and cysteine, and partially by phenylmethanesulfonylfluoride (PMSF). Metal ions such as $Fe^{2+}$ and $Hg^{2+}$ inhibited the fibrin hydrolysis completely, but $Zn^{2+}$ enhanced it. FE-32kDa hydrolyzed ${\alpha}$-chain but did not hydrolyze ${\beta}$-chain and ${\gamma}$-chain of fibrinogen. High-molecular-weight polypeptides of gelatin were hydrolyzed partially into low-molecular-weight polypeptides, but the extent of hydrolysis was limited. FE-32kDa induced hemorrhage beneath back skin of mice at the dose of $2{\mu}g$. Conclusions: FE-32kDa is a ${\alpha}$-fibrin(ogen)olytic metalloprotease that requires $Zn^{2+}$ for fibrinolytic activity and causes hemorrhage, suggesting that the enzyme is not appropriate for use as a clinical pharmacopuncture.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.391-398
• /
• 1996

The pretreatment of bark powder with sodium hydroxide and formalin showed the most excellent adsorption ratio, but this method could not practically be used because of the occurrence of dark-colored pigments in filtrates during pretreatment. Instead, acid and formalin were the most affirmative and effective among the pretreatment methods tested, and could be used for this purpose. Among tested species, Quercus acutissima and Robinia pseudo-accacia showed the largest amount of metal adsorption, and $Pb^{2+}$ was the best(83 to 96%) among the four heavy metals tested. The order of adsorption ratios other metals was as follows; $Cu^{2+}$ > $Zn^{2+}$ > $Cd^{2+}$, and the ratio was approximately 45 to 55%. In addition, as the substrate amount increased, the amount of adsorbed heavy metals in subtrates gradually increased, but the adsorbed amount was not proportional to the substrate amount. The order of heavy metal adsorption was as follows; $Pb^{2+}$ > $Cu^{2+}$ > $Cd^{2+}$ > $Zn^{2+}$. Depending on flow rate and column size, pine bark power adsorbed more heavy metals in the 5ml/min flow rate and 3.5cm column size rather than the 10ml/min and 2.0cm. However, oak bark power showed contrary results compared with pine bark powder. The adsorption of $Pb^{2+}$ occurred rapidly in the incipient stagte. Even though bark powders were repeatedly used three times, there was no change in the adsorption ratio(45%), but after four times, the adsorption ratio was significantly reduced to 35%.

• Microbiology and Biotechnology Letters
• /
• v.22 no.5
• /
• pp.507-514
• /
• 1994

Acetyl xylan esterase was produced by E. coli HB101 harboring a recombinant plasmid pKMG6 which contained the estI gene of Bacillus stearothermophilus. The maximum production was observed when the E. coli strain was grown at 37$\circC for 12 hours in the medium containing 0.5% acetyl xylan, 1.0% tryptons, 1.0% sodium chloride, and 0.5% yeast extract. The esterase produced was purified to homogeneity using a combination of ammonium sulfate fractionation, DEAE Sepharose CL-6B ion exchange chromatography and Sephacryl S-200 gel filtration. The native enzyme had an apparent molecular mass of 60 kd and was composed of two identical subunits of 29 kd. The N-terminal amino acid sequence of the polypeptide was Ala-X-Leu-Gln- Ile-Gln-Phe-X-X-Gln. The acetyl esterase displayed a pH optimum of 6.5 and a temperature opti- mum of 45$\circC. The heavy metal ions such as Ag$^{++}$, Hg$^{++}$ and Cu$^{++}$ inhibited nearly completely the activity of the esterase, and no specific metal ion was found to be required for the enzyme activity. The enzyme readily cleaved MAS, $\beta$-D-glucose pentaacetate, $\alpha$-naphthyl acetate, $\rho$-nitrophenyl acetate as well as acetyl xylan, but had no activity on $\rho$-nitrophenyl propionate, $\beta$-nitrophenyl butyrate or $\beta$-nitrophenyl valerate. The Km and Vmax values for MAS were 2.87 mM and 11.55 $\mu$mole/min, respectively. Synergistic behavior was demonstrated with a combination of xylanase and esterase from B. stearothermophilus in hydrolyzing acetyl xylan.

• Journal of Life Science
• /
• v.15 no.2 s.69
• /
• pp.279-286
• /
• 2005

The Opuntia ficus-indica var. saboten Makino (Cactus) is a tropical or subtropical plant, which is cultivated or grows naturally in Jeju island. It has been widely used as folk medicine for burned wound, edema and indigestion. In addition, its extract has been claimed to have several biological activities including anti-inflammation in oriental medicine. In this study, we examined the antimicrobial activities of the methanol extract of Opuntia ficus-indica var. saboten Makino. The extract showed a broad spectrum of antimicrobial activity against pathogenic bacteria, including antibiotics resistant bacteria (MRSA, R-P. aeruginosa, VRE) and Propionibacterium acnes, yeast, and fungi. The extract retained the activity after heat treatment for 15 min at $100^{\circ}C$ and $121^{\circ}C$ and after extended storage, up to 10 weeks storage period at $4^{\circ}C$ and $25^{\circ}C$, also stably retained its activity. It showed a better inhibitoring effect to the growth of E. coli than sodium benzoate did it at the same concentration. Addition of various salts or metal ions did not affect on its antimicrobial activity. Therefore, the antimicrobial characteristics of the extract can be applicable as a natural preservative and an antimicrobial agent for bacterial disease.

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.530-538
• /
• 2006

There are three important components in tissue engineering: the cells, signaling factors (cytokines and growth factors), and scaffolds. To obtain finely engineered tissue, all three components should perform their individual functions and be fully integrated with each other. For the past few years, we have studied the characteristics of photodimerizable HA (CHA)/alginate (CA) composite materials. CHA/CA complex hydrogels, which were irradiated under UV light and, then treated with calcium ions, were found to have good biocompatibility, mechanical properties and water resistance for implantable tissue scaffolds. In this study, we introduced a cell growth factor (basic fibroblast growth factor; bFGF) into the CHA/CA scaffolds and studied its release behavior. We also introduced tetracycline hydrochloride and flurbiprofen into the same scaffolds as model activation factors and evaluated their release behaviors from the scaffolds. The drug release rate from the materials was influenced by various parameters, such as the degree of crosslinking, the cross linker type, the physico-chemical properties of the drug, and the amount of the drug in the polymer. The results indicated that the negatively charged CHA/CA composite materials showed sustained release behavior and that HA has a particularly strong negative charge, making it attractive toward tetracycline hydrochloride and bFGF, but repulsive toward flurbiprofen.

• Macromolecular Research
• /
• v.11 no.4
• /
• pp.260-266
• /
• 2003

Ethylene vinyl acetate (EVA)/clay nanocomposites were synthesized by blending a solution of ethylene vinyl acetate copolymer containing 12% vinyl acetate abbreviated as EVA-12 in toluene and dispersion of dodecyl ammonium ion intercalated montmorillonite (l2Me-MMT) in N,N-dimethyl acetamide (DMAc). X-ray patterns of sodium montmorillonite ($Na^+$-MMT) and 12Me-MMT exhibited $d_{001}$ peak at $2{\theta}=7.4^{\circ}$ and $2{\theta}=5.6^{\circ}$ respectively; that is, the interlayer spacing of MMT increased by about 0.39 nm due to intercalation of dodecyl ammonium ions. The XRD trace of EVA showed no peak in the angular range of $3-10^{\circ}(2{\theta})$. In the XRD patterns of EVA/clay hybrids with clay content up to 6 wt% the basal reflection peak of 12Me-MMT was absent. leading to the formation of delaminated configuration of the composites. When the 12Me-MMT content was 8 wt% in the EVA-12 matrix, the hybrid revealed a peak at about $2{\theta}=5.6^{\circ}$, owing to the aggregation of aluminosilicate layers. Transmission electron microscopic photograph exhibited that an average size of 12-15 nm clay layers were randomly and homogeneously dispersed in the polymer matrix, which led to the formation of nanocomposite with delaminated configuration. The formation of delaminated nanocomposites was manifested through the enhancement of mechanical properties and thermal stability, e.g. tensile strength of an hybrid containing only 2 wt% 12Me-MMT was enhanced by about 36% as compared with neat EVA-12.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.7
• /
• pp.969-978
• /
• 2014

The aprE2 gene with its prosequence from Bacillus subtilis CH3-5 was overexpressed in Escherichia coli BL21(DE3) by using plasmid pET26b(+). After IPTG induction, active and mature AprE2 was produced when cells were grown at $20^{\circ}C$, whereas inactive and insoluble enzyme was produced in a large amount when cells were grown at $37^{\circ}C$. The insoluble fraction was resuspended with 6 M guanidine-HCl and dialyzed against 2 M Tris-HCl (pH 7.0) or 0.5 M sodium acetate (pH 7.0) buffer. Then active AprE2 was regenerated and purified by a Ni-NTA column. Purified AprE2 from the soluble fraction had a specific activity of $1,069.4{\pm}42.4U/mg$ protein, higher than that from the renatured insoluble fraction. However, more active AprE2 was obtained by renaturation of the insoluble fraction. AprE2 was most stable at pH 7 and $40^{\circ}C$, respectively. The fibrinolytic activity of AprE2 was inhibited by PMSF, but not by EDTA and metal ions. AprE2 degraded $A{\alpha}$ and $B{\beta}$ chains of fibrinogen quickly, but not the ${\gamma}$-chain. AprE2 exhibited the highest specificity for N-succinyl-Ala-Ala-Pro-Phe-pNA. The $K_m$ and $k_{cat}/K_m$ of AprE2 was 0.56 mM and $3.10{\times}10^4S^{-1}M^{-1}$, respectively.