• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.311-312
• /
• 2012

PEO(Plasma Electrolytic Oxidation) 방법으로 인한 마그네슘 합금의 산화막 코팅시 Sodium Aluminate의 역할을 알아보았다. 전해액 내에 Sodium Aluminate 의 농도가 증가할수록 Plasma arc 발생에 필요한 전압의 상승이 빨라졌으며 그 산화막이 치밀해짐을 알 수 있었다. 또한 치밀한 산화막의 기공률은 분석하여 이를 내식성 결과와 비교함으로써 산화막의 기공률이 내식성에 미치는 영향을 고찰해보았다.

• 열처리공학회지
• /
• 제25권5호
• /
• pp.227-232
• /
• 2012

Magnesium alloy have good physical properties such as good castability, good vibration absorption, high strength/weight ratios. Despite the desirable properties, the poor resistance of Mg alloy impedes their use in many various applications. Therefore, magnesium alloy require surface treatment to improve hardness, corrosion and wear resistance. Plasma Electrolytic Oxidation (PEO) is one the surface treatment methods to form oxide layer on Mg alloy in alkali electrolyte. In comparison with Anodizing, there is environmental process having higher hardness and faster deposition rate. In this study, the characteristics of oxide film were examined after coating the AZ31 Mg alloy through the PEO process. We changed concentration of sodium aluminate into $K_2ZrF_6$, KF base electrolyte. The morphologies of the coating layer were characterized by using scanning electron microscopy (SEM). Corrosion resistance also investigated by potentiodynamic polarization analysis. As a result, propertiy of oxide layer were changed by concentration of sodium aluminate. Increasing with concentration of sodium aluminate in electrolyte, the oxidation layer was denser and the pore size was smaller on the surface.

• Advances in concrete construction
• /
• 제11권1호
• /
• pp.73-80
• /
• 2021

Rice Husk Ash (RHA) geopolymer paste activated by sodium aluminate were characterized by X-ray diffractogram (XRD), scanning electron microscope (SEM), energy dispersion X-Ray analysis (EDAX)and fourier transform infrared spectroscopy (FTIR). Five series of RHA geopolymer specimens were prepared by varying the Si/Al ratio as 1.5, 2.0, 2.5, 3.0 and 3.5. The paper focuses on the correlation of microstructure with hardened state parameters like bulk density, apparent porosity, sorptivity, water absorption and compressive strength. XRD analysis peaks indicates quartz, cristobalite and gibbsite for raw RHA and new peaks corresponding to Zeolite A in geopolymer specimens. In general, SEM micrographs show interconnected pores and loosely packed geopolymer matrix except for specimens made with Si/Al of 2.0 which exhibited comparatively better matrix. Incorporation of Al from sodium aluminate were confirmed with the stretching and bending vibration of Si-O-Si and O-Si-O observations from the FTIR analysis of geopolymer specimen. The dense microstructure of SA2.0 correlate into better performance in terms of 28 days maximum compressive strength of 16.96 MPa and minimum for porosity, absorption and sorptivity among the specimens. However, due to the higher water demand to make the paste workable, the value of porosity, absorption and sorptivity were reportedly higher as compared with other geopolymer systems. Correlation regression equations were proposed to validate the interrelation between physical parameters and mechanical strength. RHA geopolymer shows comparatively lower compressive strength as compared to Fly ash geopolymer.

• 공업화학
• /
• 제22권2호
• /
• pp.214-218
• /
• 2011

마이크로파 가열 방법과 기존의 가열 방법을 이용하여 석탄회로부터 제올라이트 A를 합성하였다. 반응시간, sodium aluminate의 양, 반응 온도 등이 제올라이트 A의 결정화에 미치는 영향에 대해 연구하였다. $80{\sim}100^{\circ}C$의 범위에서 제올라이트 A의 합성에 필요한 반응 시간은 3~6 h이었으며, 6 h 이상이 되면 결정화도가 오히려 감소하였다. 제올라이트 A의 합성에 필요한 sodium aluminate의 양은 $90^{\circ}C$ 이상에서는 합성용액의 $SiO_2/Al_2O_3$의 비가 0.44~1.05에서 최적이었으며, $80^{\circ}C$에서는 더 많은 양이 필요하였다. 마이크로파 가열 방법은 기존의 가열 방법에 비해 초기 결정화 속도는 약간 증가하였으나, 충분히 결정화되는데 필요한 반응시간은 서로 비슷하였다. 따라서 마이크로파 가열에 의한 석탄회로부터 제올라이트 A의 합성에 미치는 영향은 크지 않다는 것을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.323-328
• /
• 2002

Rapid set accelerators are widely used in tunnel construction, however quality criteria of and dosage are not well established. The density and solid content of admixtures, setting time and compressive strength of paste and mortar with admixtures were investigated to establish the quality criteria. While the early strength of mortar with sodium-silicate, sodium-aluminate and calcium aluminate type admixtures that have high alkali content are very high, but long-term strength are low. Aggregates of shotcrete has to be carefully selected. Sodium-silicate type admixture need longer setting time than the others.

• 한국응용과학기술학회지
• /
• 제32권2호
• /
• pp.240-247
• /
• 2015

석탄회를 NaOH로 용융시킨 후 수열 처리에 의하여 제올라이트 A를 합성하였다. NaOH/석탄회의 비, 용융 온도, $NaAlO_2$의 첨가량, 수열 처리 온도 및 시간이 생성된 제올라이트의 종류와 결정도에 미치는 영향에 대하여 연구하였다. 결정도가 높은 제올라이트의 생성에 필요한 최적의 NaOH/석탄회의 중량비는 1.2, 최적의 용융 온도는 $550^{\circ}C$이었다. 용융된 석탄회로부터 $Si^{4+}$ 와 $Al^{3+}$의 용출은 교반 시간의 영향을 받지 않았다. 생성된 제올라이트의 형태는 첨가한 $NaAlO_2$의 영향을 받는 것으로 나타났다. 적은 양의 $NaAlO_2$를 첨가하면 제올라이트 X가 생성되나 $NaAlO_2$의 양이 증가하면 단일상의 제올라이트 A가 생성되었다. 수열처리 시간과 온도가 증가하면 제올라이트 A는 hydroxysodalite로 변화 하였다. 승온 속도를 낮춰 반응 온도까지의 도달시간을 증가시키면 결정도가 좋은 제올라이트 A를 얻을 수 있었다.

• Advances in concrete construction
• /
• 제11권1호
• /
• pp.81-88
• /
• 2021

Rice Husk Ash (RHA) geopolymer paste activated by sodium aluminate were characterized by X-ray diffractogram (XRD), scanning electron microscope (SEM), energy dispersion X-Ray analysis (EDAX)and fourier transform infrared spectroscopy (FTIR). Five series of RHA geopolymer specimens were prepared by varying the Si/Al ratio as 1.5, 2.0, 2.5, 3.0 and 3.5. The paper focuses on the correlation of microstructure with hardened state parameters like bulk density, apparent porosity, sorptivity, water absorption and compressive strength. XRD analysis peaks indicates quartz, cristobalite and gibbsite for raw RHA and new peaks corresponding to Zeolite A in geopolymer specimens. In general, SEM micrographs show interconnected pores and loosely packed geopolymer matrix except for specimens made with Si/Al of 2.0 which exhibited comparatively better matrix. Incorporation of Al from sodium aluminate were confirmed with the stretching and bending vibration of Si-O-Si and O-Si-O observations from the FTIR analysis of geopolymer specimen. The dense microstructure of SA2.0 correlate into better performance in terms of 28 days maximum compressive strength of 16.96 MPa and minimum for porosity, absorption and sorptivity among the specimens. However, due to the higher water demand to make the paste workable, the value of porosity, absorption and sorptivity were reportedly higher as compared with other geopolymer systems. Correlation regression equations were proposed to validate the interrelation between physical parameters and mechanical strength. RHA geopolymer shows comparatively lower compressive strength as compared to Fly ash geopolymer.

• 한국세라믹학회지
• /
• 제23권6호
• /
• pp.1-6
• /
• 1986

The hydration of $C_3A$ and $C_3A-CaSO_4$.$2H_2O$ was investigated with varying concentration (0.1-1.0%) of sodium gluconate solution. gluconate solution. Sodium gluconate accelerates cation dissolution from $C_3A$ for the first several minutes but depresses the rate of heat evolution in the course of $C_3A$ hydration. The hydration of $C_3A$ in the presence of sodium gluconate was modified such that the formation of the intermediate hydrate C4AH$\chi$ crystal was much reduced and most of the product became amorphous. The retardation of $C_3A-CaSO_4$.$2H_2O$ hydration in the presence of sodium gluconate was controlled by the competitive adsorption between gluconate anion and $SO_4^{-2}$ onto $C_3A$ surface.

• Advances in environmental research
• /
• 제5권2호
• /
• pp.141-151
• /
• 2016

Large amounts of aluminum hydroxide ($Al(OH)_3$) exist in water purification sludge (WPS) because of the added aluminum coagulant in water treatment process. Notably, $Al(OH)_3$ is an amphoteric compound, can be dissolved in its basic condition using sodium hydroxide to form aluminate ions ($Al(OH)_4{^-}$). However, in a process in which pH is increasing, the humid acid can be dissolved easily from WPS and will inhibit the recovery and reuse of the dissolved aluminate ions. This study attempts to fix this problem by a novel approach to separate $Al(OH)_4{^-}$ ions using nanofiltration (NF) technology. Sludge impurity in a alkaline solution is retained by the NF membrane, such that the process recovers $Al(OH)_4{^-}$ ions, and significantly decreases the organic matter or heavy metal impurities in the permeate solution. The $Al(OH)_4{^-}$ ion is an alkaline substance. Experimental results confirm that a recovered coagulant of $Al(OH)_4{^-}$ ion can effectively remove kaolin particles from slightly acidic synthetic raw water.

• 약학회지
• /
• 제39권1호
• /
• pp.68-77
• /
• 1995

Aluminum magnesium silicate was synthesized by reacting the mixed solutions of sodium aluminate and magnesium chloride with sodium silicate solution in this study. The optimal synthesis conditions based on the yield of the product has been attained according to Box-Wilson experimental design. It was found that the optimal synthetic conditions of aluminum magnesium silicate were as follows: Reaction temperature=$69~81^{\circ}C$; concentration of two reactants, sodium aluminate and magnesium chloride= 13.95~14.44 w/w%; molar concentration ratio of the two reactants, [NaAlO$_{2}$]/MgCl$_{2}$]=3.63~4.00; reaction time= 12~15 min; drying temp. of the product=$70~76^{\circ}C$. Aluminum magnesium silicate synthesized under the optimal synthesis condition was dispersed in 0.75, 1.0 and 1.5w/w% aqueous solution or suspension of six dispersing agents, and the Theological properties of the dispersed systems prepared have been investigated at $15^{\circ}C$ and $25^{\circ}C$ using Brookfield LVT Type Viscometer. The acid-consuming capacity of the most excellent product was 272~278 ml of 0.1N-HCl per gram of the antacid. The flow types of 5.0 w/w% aluminum magnesium silicate suspension were dependent upon the kind and concentration of dispersing agents added. The apparent viscosity of the suspension was generally increased with concentration of dispersing agents and was not significantly changed or decreased as the temperature was raised. A dispersing agent, hydroxypropyl cellulose suspension, exhibited an unique flow behavior of antithixotropy. The flow behavior of the suspension dispersed in a given dispersing agent not always coincided with that of the dispersing agent solution or suspension itself.