• 제목/요약/키워드: sodium acetate

검색결과 372건 처리시간 0.027초

형광 X-선 분석에 의한 미량 구리의 정량 (Determination of Microamounts of Copper by Fluorescence X-Ray Analysis)

  • 최원형;김찬호
    • 대한화학회지
    • /
    • 제16권6호
    • /
    • pp.373-377
    • /
    • 1972
  • 미량 구리의 sodium diethyl dithiocarbamate의 chelate를 ethyl acetate로 추출하고 이 추출액을 구리(원자번호 29번)의 이웃원소인 아연(원자번호 30번) 분말에 흡착시켰다. 추출액을 날려보낸 뒤에 $250kg/cm^2$ 으로 압축성형하여 구리의 $K_{\alpha}2(2{\theta}_{LiF} = 45.08^{\circ})$에서 형광 X-선을 측정한 결과 구리 $10{\mu}g$까지 측정할 수 있었으며 표준물질첨가법에 의하여 상대오차를 ${\pm}10$%이내로 낮출수가 있었다.

  • PDF

Hydrolysis of p-Nitrophenyl Acetate and p-Nitrophenyldiphenyl Phosphate in Micellar Solution by N-Chloro Compounds : Involvement of Counter Ions in Micellar Catalysis

  • 박병덕;이윤식
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권10호
    • /
    • pp.938-945
    • /
    • 1995
  • Hydrolysis of p-nitrophenyl acetate (PNPA) and p-nitrophenyldiphenyl phosphate (PNPDPP) by N-chloro compounds in micellar solution were studied. N,N'-dichloroisocyanuric acid sodium salt (DCI) in cetyltrimethylammonium chloride (CTACl) micellar solution gave pseudo first-order kinetics. But, DCI in cetyltrimethylammonium bromide (CTABr) micellar solution showed typical series first-order kinetics - fast hydrolysis of the esters and concomitant slow decay of the hydrolyzed product, p-nitrophenolate. The hydrolysis rate was decreased as the hydrophobicity of N-chloro compounds was increased, which is the opposite trend to the usual bimolecular micellar reaction. This curious behavior of the N-chloro compounds in the catalytic hydrolysis of PNPA and PNPDPP in a cationic micellar system can be best explained by participation of counter ions of the surfactants during hydrolysis.

Effects of supplemented sodium butyrate on the in vitro rumen fermentation and growth performance of Hanwoo calves

  • Chae Hwa, Ryu;Byeonghyeon, Kim;Seul, Lee;Hyunjung, Jung;Youl Chang, Baek
    • 농업과학연구
    • /
    • 제48권4호
    • /
    • pp.957-963
    • /
    • 2021
  • The study aimed to investigate the effects of supplemented sodium butyrate on the in vitro rumen fermentation and growth performance of Hanwoo calves. In total, four treatments were employed according to the sodium butyrate levels: no addition (control), an addition of 0.1% (treatment 1), an addition of 0.3% (treatment 2), and an addition of 0.5% (treatment 3). After 48 hours of fermentation, the ruminal pH was found to be higher in T1 than in C. Total volatile fatty acids were significantly higher in T2 and T3 than in C. The ratio of acetate and propionate was significantly lower in T1 and T3 than in C. In this study, the optimal concentration to promote rumen fermentation was found to be 0.3%, i.e., T2, and an experiment on Hanwoo calves at a farm was conducted. However, there were no significant differences between the treatment groups in terms of the daily weight gain, feed conversion ratio, and final body weight in the feeding experiment. Also, there were no significant differences in the body length, withers height, and height at hip cross between the control and the treatment groups. The addition of 0.3% sodium butyrate was most effective at promoting in vitro rumen fermentation, but it did not significantly affect the growth performance when fed to Hanwoo calves. This indicates that the addition of sodium butyrate improved rumen fermentation but did not have a growth-promoting effect. Future studies need to compare growth and carcass performance outcomes to confirm long-term effects.

Mucor sp. KCTC 8405P의 배지조성이 감마 리놀렌산의 생산에 미치는 영향 (Influence of Medium Composition on the Production of $\gamma$-Linolenic Acid by Mucor sp. KCTC 8405P)

  • Kang, Hun-Seung;Shin, Hyun-Kyung
    • 한국미생물·생명공학회지
    • /
    • 제17권6호
    • /
    • pp.568-573
    • /
    • 1989
  • 탄소원과 질소원, 배지의 초기 pH 및 C/N비가 Mucor sp. KCTC 8405P의 감마 리놀렌산 생산에 미치는 영향을 조사하였다. 탄소원으로는 포도당이, 질소원으로는 황산 암모늄같은 무기 질소원과 요소, 펩톤같은 유기질소원이 균체 유지함량 및 감마 리놀렌산 수율 측면에서 양호한 것으로 판명되었다. 사용하는 질소원은 일정농도 이하로 제한할 필요가 있으며 포도당과 황산 암모늄을 사용할 경우 최적 C/N비는 약 56.6으로 조사되었다. 균체 유지함량을 증가시키기 위한 배지의 초기 pH는 8 또는 9가 유리한 것으로 나타났으며, 포도당과 sodium acetate를 혼합하여 탄소원으로 사용하는 것이 바람직한 것으로 조사되었다. 3% 포도당과 2% sodium acetate 를 탄소원으로, 0.1% 황산암모늄을 질소원으로 포함하는 배지를 사용하여 플라스크 교반배양을 실시한 결과 배지 100$m\ell$ 당 약 315mg의 균체유지량을 얻었고, 이중 감마 리놀렌산 함량은 약 13-14%로 조사되었다.

  • PDF

Mortierella isabellina IFO 8183에 의한 ${\gamma}$-Linolenic Acid 생산 (Production of ${\gamma}$-Linolenic Acid by Mortierella isabellina IFO 8183)

  • 양동현;남희섭;이상협;방원기
    • 한국식품과학회지
    • /
    • 제21권6호
    • /
    • pp.808-814
    • /
    • 1989
  • Mortierella isabellina IFO 8183을 이용하여 ${\gamma}-linolenic$ acid를 생산하기 위한 최적 배양조건을 검토한 결과, 최적 탄소원과 최적 질소원은 각각 glucose와 $NH_4NO_3$이었으며, 지질 생산배지내의 최적 C/N율은 40이었다. 또한, 최적 초기 pH와 배양온도는 각각 6.0과 $30^{\circ}C$이었으며, 균체내에 축적된 지질의 지방산 조성은 pH와 온도에 의해 변화되었다. Sodium acetate를 배양 초기에 0.5%(w/v) 첨가하였을 때 대조구에 비해 ${\gamma}-linolenic$ acid 함량과 ${\gamma}-linolenic$ acid 생성량이 각각 15.4%와 37.8% 증가되었다. 최적 조건하에서 8일간 진탕배양하였을 때 균체수율, 지질수율, 지질함량, ${\gamma}-linolenic$ 함량 및 ${\gamma}-linolenic$생성량은 각각 0.347g/g, 0.18g/g, 0.52g/g, 60mg/g 및 347mg/l이었다.

  • PDF

초음파 방법을 이용한 ZnO 나노입자 합성 및 광촉매 특성 연구 (Sonochemical Synthesis and Photocatalytic Characterization of ZnO Nanoparticles)

  • 김민선;김재욱;유정열;김종규
    • 대한화학회지
    • /
    • 제60권1호
    • /
    • pp.34-38
    • /
    • 2016
  • 본 연구는 zinc acetate dihydrate와 sodium hydroxide를 사용하여 ZnO nanoparticles (ZnO NPs)을 합성하였다. 실험에 사용된 방법은 초음파 방법이다. 같은 농도의 각각 zinc acetate dihydrate와 sodium hydroxide를 de-ionized water에 넣고 30분간 교반 하였다. 이 과정에서 생성된 백색의 생성물은 교반 하면서 ultrasonic processor을 사용하여 각각 60분, 120분, 180분, 240분, 360분 처리하였다. 생성물들은 원심분리 후 남은 이온들을 제거하기 위하여 에탄올을 사용하여 여러 번 세척하고, 50 ℃에서 24시간 동안 건조하였다. 합성된 물질들의 결정성과 구조적 특성을 확인하기 위하여 X-ray diffraction spectroscopy(XRD)와 Field emission scanning electron microscopy(FE-SEM)을 사용하였다. 광 촉매 효과는 오염물질 대신 Rhodamin-B를 사용하여 UV 조사하에 암실에서 실험하였다. 광 촉매 효과는 UV-vis spectrometer를 이용하여 확인하였다. XRD 결과 순수한 ZnO가 합성된 것을 확인 하였다. FE-SEM을 통하여 시간이 지남에 따라 구 형태에서 막대형태를 지나 꽃 형태로 변하는 것을 확인 할 수 있었다. 광촉매 특성 결과 꽃 형태를 가진 ZnO NPs가 광 촉매 특성이 가장 우수한 것으로 확인 되었다.

Ascorbic Acid와 Pyrophosphate로부터 Ascorbic Acid-2-Phosphate의 효소적 생산

  • 최현일;이상협;방원기
    • 한국미생물·생명공학회지
    • /
    • 제24권5호
    • /
    • pp.613-618
    • /
    • 1996
  • Microorganisms capable of producing ascorbic acid-2-phosphate (AsA2P) from ascorbic acid (AsA) and pyrophosphate (PPi) were screened from the culture collection of this laboratory. Among them, Cellulomonas sp. AP-7 showed the highest productivity of AsA2P. The optimal conditions for the production of AsA2P from AsA and PPi with cell-free extract as an enzyme source were investigated. The reaction mixture for the maximal production of AsA2P consisted of 21 g protein of cell-free extract per liter as the enzyme source, 250 mM AsA, 200 mM sodium pyrophosphate, 150 mM sodium acetate buffer (pH 4.5). By using this reaction mixture, 31.9 mM of AsA2P, which corresponded to a 12.76% yield based on AsA, was produced after incubation of 48 hr at 33$\circ$C.

  • PDF

고분자(高分子) 계면활성제(界面活性劑)에 관(關)한 연구(硏究)(제(第) 1 보(報));나트륨 알파 술폰 지방산(脂肪酸) 비닐에스테르 올리머고류(類)의 합성(合成) (Studies on the Polymeric Surface Active Agent (I);Synthesis of Sodium ${\alpha}-Sulfo$ Fatty Acid Vinyl Ester Oligomers)

  • 정노희;노승호;남기대;소부영
    • 한국응용과학기술학회지
    • /
    • 제6권1호
    • /
    • pp.21-26
    • /
    • 1989
  • Four fatty acid vinyl esters were synthesized by transesterification between vinyl acetate and lauric acid, myristic acid, palmitic acid, stearic acid, respectively. Fatty acid vinyl ester oligomers were prepared from polymerization of four fatty acid vinyl esters in the presence of potassium persulfate in methanol. The ${\alpha}-sulfonation$ of these four fatty acid vinyl ester oligomer were carried by direct addition of sulfur trioxide. Especially, molecular weights of sodium ${\alpha}-sulfo$ fatty acid vinyl ester oligomers were measured by boiling point method.

Determination of Chromium(VI) by Differential-Pulse Polarography with a Sodium Borate Supporting Electrolyte

  • Hong, Tae-kee;Czae, Myung-Zoon
    • Bulletin of the Korean Chemical Society
    • /
    • 제9권2호
    • /
    • pp.77-80
    • /
    • 1988
  • A suituable choice of supporting electrolyte medium for trace level determinations of chromium(VI) by differential pulse polarography is described. A comparative study suggests that sodium borate buffer is superior to ammonium acetate, ammonium tartrate, and especially to NaF which was recently known to be one of the most proper medium for the purpose. With 0.01 M borate, the best combination of high sensitivity, well-defined base line, and freedom from common interferents was attained. With $5.0{\times}10^{-7}$M Cr(VI), tenfold excesses of Cu(II) and Fe(III), and a five hundred-fold excess of $Cl^-$ do not change the peak current by more than about 1%. And the detection limit was $5.0{\times}10^{-8}$M Cr(VI).

Optimization of Wave Forms for Pulsed Amperometric Detection of Cyanide and Sulfide with Silver-Working Electrode

  • 박성우;홍성욱;유재훈
    • Bulletin of the Korean Chemical Society
    • /
    • 제17권2호
    • /
    • pp.143-146
    • /
    • 1996
  • A continuous potential pulse is applied to a silver-working electrode on a pulsed amperometric detector (PAD) for detection of free cyanide and sulfide. The moving phase is 0.1 M sodium hydroxide, 0.5 M sodium acetate and 5% (v/v) ethylenediamine mixture, and the flow rate is 0.7 mL/min. Optimized pulse conditions include a -200 mV (vs. Ag/AgCl reference electrode) detection potential(Ed) for 60 msec and 50 mV cleaning potential (Ec) for 120 msec. The silver working electrode surface is not poisoned by cyanide or sulfide, and the PAD maintains long-term stability without loss of sensitivity and reproducibility at these pulse conditions. The detection limit of cyanide and sulfide separated by ion chromatography using an anion exchange column is 0.1 ppm and 0.05 ppm, respectively.