• 펄프종이기술
• /
• 제45권1호
• /
• pp.6-12
• /
• 2013

TFormic acid-hydrogen peroxide (or performic acid) pulping process needs milder reaction condition than other chemical pulping process. Two-step formic acid-hydrogen peroxide pulping process can produce the chemical pulp with similar pulp yield and lignin content compared with soda-anthraquinone process. Formic acid-hydrogen peroxide pulp can be produced less xylan content than other alkaline pulps, which favor for dissolving pulp production. Formic acid-hydrogen peroxide pulp showed better response beating than soda-anthraquinone(AQ) pulps with reaching target freeness with less beating. Also, formic acid-hydrogen peroxide pulp had better tensile index at similar freeness level compared with soda-AQ pulps.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.86-86
• /
• 2010

Micro- and nanoscale texturing and control of surface energy have been considered for superhydrophobicity on polymer and silicon. However these surfaces have been reported to be difficult to meet the robustness and transparency requirements for further applications, from self cleaning windows to biochip technology. Here we provided a novel method to fabricate a nearly superhydrophobic soda-lime glass using two-step method. The first step involved wet etching process to fabricate micro-sale patterns on soda-lime glass. The second step involved application of $SiO_x$-incorporated DLC to generate high intrinsic contact angle on the surface using chemical vapor deposition (CVD) process. To investigate the effect of surface roughness, we used both positive and negative micro-scale patterns on soda-limeglass, which is relatively hard for surface texturing in comparison to quartz or Pyrex glasses due to the presence of impurities, but cheaper. For all samples we tested the static wetting angle and transparency before and after 100 cycles of wear test using woolen steel. The surface morphology is observed using optical and scanning electron microscope (SEM). The results shows that negative patterns had a greater wear resistance while the hydrophobicity was best achieved using positive patterns having static contact angle up to 140 deg. with about 80% transparency. The overall experiment shows that positive patterns at etching time of 1 min shows the optimum transparency and hydrophobicity. The optimization of micro-scale pattern to achieve a robust, transparent, superhydrophobic soda-lime glass will be further investigated in the future works.

• 공업화학
• /
• 제24권4호
• /
• pp.382-390
• /
• 2013

소다석회 조성의 폐 병유리를 대상으로 효율적인 재활용방안을 찾기 위해서 발포화에 적절한 조성의 조절을 통해 직접 보온단열재 발포유리블럭을 제조할 수 있는 공정을 조사하였다. 폐 병유리의 직접 발포화를 위해 첨가되는 성분 및 조성은, 폐 유리분말 100중량부에 대하여 $SiO_2$ 10중량부, $Na_2SO_4$ 0.5중량부, $B_2O_3$ 3.0중량부, 그리고 발포제로서 카본 블랙류 탄소재 0.3중량부이다. 발포공정은 턴넬키른에서 진행하며, 발포소성 조건은 폐 유리분말의 입도는 -325 mesh, 발포소성온도는 $830{\sim}850^{\circ}C$, 발포시간은 30~35 min이 바람직하다. 상기 조건하에 제조된 발포체는 밀도가 $0.17{\sim}0.21g/cm^3$, 열전도도 $0.06{\pm}0.005kcal/h{\cdot}m{\cdot}^{\circ}C$, 수분 흡수율 1.1~1.5%, 압축강도는 $20{\sim}30kgf/mm^2$의 물성을 나타내었다.

• 자원리싸이클링
• /
• 제32권2호
• /
• pp.52-58
• /
• 2023

본 연구에서는 석회석 활용분야 확대를 위해 소석회를 이용한 소다라임 제조 기초 실험을 실시하였다. 소다라임 제조를 위해 압출식 방식과 디스크 방식의 펠렛타이져를 이용하였으며, 첨가제로 벤토나이트를 투입하여 제조한 소다라임의 이산화탄소 흡수 특성을 평가하였다. 실험결과, 제조 방식에 관계없이 이산화탄소와의 반응에 따라 소다라임에서 CaCO₃의 peak가 확인되었으며, 방해석과 아라고나이트가 함께 생성된 것을 확인하였다. 디스크 방식으로 제조한 소다라임이 압출방식에 비해 더 큰 비표면적을 나타내었고, 벤토나이트를 첨가한 조건에서도 비표면적이 향상되었다. 비표면적이 향상된 시료 조건에서 이산화탄소 흡수율이 증가되는 것으로 확인되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.125-125
• /
• 2006

We present a low temperature thermal process for the transparent dielectric layer, barrier rib, and white back dielectric layer on the soda-lime glass substrate of the PDP by the $TruNano^{TM}$ processor in combination with a compositional modification to the conventional dielectric pastes. By this method the firing temperature can be lowered by more than $100^{\circ}C$.

• 대한화학회지
• /
• 제55권1호
• /
• pp.86-91
• /
• 2011

수산화나트륨과 과산화 무기산을 사용하여 흑색 액체로부터 수산화 리그닌과 과산화 리그닌을 얻었다. 과산화 리그닌을 10% HCl을 사용하여 가수분해하여 가수분해 리그닌을 얻었다. 카르복실화와 인산화과정을 거쳐 카르복시 리그닌과 인산화 리그닌을 얻었다. 에피클로르히드린을 사용하여 가교 리그닌도 얻었다. 이들 얻어진 리그닌들을 적외선분광법, 열김량분석, 시차열분석법으로 분석 하였다. 이들 얻어진 리그닌의 금속이온 흡착효과를 조사하였다. 과산화 리그닌이 수산화된 리그닌 보다 흡착 능력이 우수하였다.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.981-986
• /
• 2003

In order to investigate the possibility of processing of brittle material by ball impact, the effects of boundary conditions about impact damage of soda-lime glass by small spheres were evaluated experimentally. It was investigated that crack appearance developed in soda-lime glass with boundary conditions of without sealing, single-sealing and double-sealing by impact velocity. The double-sealing was most effective in the development of perfect cone than other boundary condition. In case of double-sealing condition, PVC and Polyurethane sealing were more effective in producing a perfect cone formation than other sealing materials. The impact velocity range over which perfect cones were formed was influenced by both the contact area and diameter of impact particle.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.35-40
• /
• 2005

We tried to synthesize the 2-methyl anthraquinone (2-MAQ) with reaction between phthalic anhydride and toluene instead of using 2-methyl phthalic anhydride and benzene. This process didn't generate significant of amount of 1-methyl anthraquinone (l-MAQ) as byproduct. The other advantage of this pathway is using less toxic toluene instead of benzene known as carcinogen. 2-MAQ synthesized this pathway was as effective as reagent grade from commercial available based on soda-anthraquinone(AQ) pulping results.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.74-81
• /
• 2019

This study reports the CW $CO_2$ laser scribing of soda lime glass. In this study, scribing experiments are carried out at different laser powers, scan speeds, and focal positions to investigate the effect of the process parameters on the interaction characteristics between a laser beam and glass. In particular, the interaction characteristics are analyzed and described with the input laser energy per unit length. According to the experimental results, the damage threshold for the glass surface was found to exist between 0.072 and 0.08 J/mm. The input laser energy in this region induced partial melting of the surface and grain-shaped cracks. These cracks tended to increase as the input laser energy increased. At the laser input energy larger than 1 J/mm, a huge crack propagating along the scan direction was produced, and the volume below the scribed area was fully melted. The growth of this crack finally resulted in the complete cutting of the glass at the input laser energy above 8 J/mm. It was found that both the width and depth of the scribed line increased with increasing input laser energy. For the beam focusing at the rear surface, the width of the scribed line varied irregularly. This could be ascribed to the increased asymmetry of the beam intensity distribution when the laser beam was focused at the rear surface. Under this condition, a large burr was only produced on one side of the scribed line.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1999년도 가을 한국섬유공학회 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.291-294
• /
• 1999