• 한국재료학회지
• /
• 제16권12호
• /
• pp.743-746
• /
• 2006

ZTA tubes were prepared by centrifugal casting and sintered at $1600^{\circ}C$ for 2 hrs. The ZTA tubes were machined into specimens of $3{\times}4{\times}40$ mm. Molten Soda lime glass (SLG) was penetrated into the surface of ZTA at an optimized condition of $1500^{\circ}C$ for the holding time of 5 h and furnace cooled. The extra glass on the surface was removed using a resin bonded diamond wheel. The glass penetrated samples were tested for their flexural strength using four point bend test. Vickers Indentation cracks were made on the glass penetrated surface at different loads of 9.8 N, 49 N, 98 N and 196 N. The residual compression on the surface enhanced the flexural strength and crack arrest behaviour remarkably. This was attributed to the thermoelastic mismatch between the glass and ZTA matrix during cooling.

• 한국결정성장학회지
• /
• 제33권1호
• /
• pp.7-14
• /
• 2023

유리병 제조 공장에서 생산한 유리 조성을 4년간 40 차례 분석하여 Lakatos 모델로 점도를 구하였다. log η가 3, 6.6, 10, 12.3 Pa·s 일 경우의 isokom 온도를 구하여 조성과 isokom 온도와의 상관관계를 분석하였다. 조성에서 함량에 편차가 가장 큰 것은 MgO로 변동계수가 0.890이었다. 그러나 MgO 함량 편차가 점도 변화에 주는 영향은 제한적 이었다. 반면 CaO는 연화점 이하에서 비가교산소를 감소시키는 작용에 의하여 isokom 온도를 낮추고 있었다.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.481-486
• /
• 2008

나트륨(Na) 함유량이 다른 세 종류의 유리관인 Borosilicate($Na_2O$ 4%), Soda-Lime($Na_2O$ 14%), 그리고 Aluminosilicate($Na_2O$ 0.06%) 유리관의 방전 실험을 통하여 유리관 내벽의 흑화를 관측하였다. 수은 혼합기체(Ne+Ar+Hg)의 방전에서 나트륨 함유량이 많은 유리관일수록 흑화가 심하게 나타난다. 무수은 가스(Ne+Ar)의 방전에서는 흑화가 나타나지 않는다. 나트륨 함유량이 많은 수은 방전 램프에서 봉입 기체의 압력이 작을수록 흑화의 정도가 커진다. 흑화 방지재를 도포한 유리관은 흑화가 미약하게 나타난다. 이 실험을 통하여 흑화는 유리재의 나트륨 성분과 수은 이온의 결합에 의한 아말감($NaHg_2$)이 유리관 내벽에 형성된 것으로 분석된다.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.74-81
• /
• 2019

This study reports the CW $CO_2$ laser scribing of soda lime glass. In this study, scribing experiments are carried out at different laser powers, scan speeds, and focal positions to investigate the effect of the process parameters on the interaction characteristics between a laser beam and glass. In particular, the interaction characteristics are analyzed and described with the input laser energy per unit length. According to the experimental results, the damage threshold for the glass surface was found to exist between 0.072 and 0.08 J/mm. The input laser energy in this region induced partial melting of the surface and grain-shaped cracks. These cracks tended to increase as the input laser energy increased. At the laser input energy larger than 1 J/mm, a huge crack propagating along the scan direction was produced, and the volume below the scribed area was fully melted. The growth of this crack finally resulted in the complete cutting of the glass at the input laser energy above 8 J/mm. It was found that both the width and depth of the scribed line increased with increasing input laser energy. For the beam focusing at the rear surface, the width of the scribed line varied irregularly. This could be ascribed to the increased asymmetry of the beam intensity distribution when the laser beam was focused at the rear surface. Under this condition, a large burr was only produced on one side of the scribed line.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.367-370
• /
• 2007

An EEFL with the sodium free alumino-silicate glass of high K and low $tan{\delta}$, has been investigated. As compared with borosilicate and the soda-lime EEFLs, the luminous efficiency as well as the pinhole stability of new EEFLs improves remarkably without blackening of $NaHg_2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.181-182
• /
• 2000

The glass compositions of $PbO-SiO_2-B_2O_3$ system and $P_2O_5-PbO-ZnO$ system for the transparent dielectric materials for front panel and $P_2O_5-ZnO-BaO$ and $SiO_2-ZnO-B_2O_3$ for the reflective dielectric materials for back panel of PDP(Plasma Display Panel) were investigated. As a transparent dielectric materials for front panel, $PbO-SiO_2-B_2O_3$ glass showed good dielectric properties, high transparency and proper thermal expansion matching to soda-lime glass substrate. And the reflective dielectric materials for back panel were prepared from parent glass of $SiO_2-ZnO-B_2O_3$ system and oxide filler. It was found that these glass-ceramics are useful materials for reflective dielectric layers, as those have a similar thermal expansion to soda-lime glass plate, high reflectance, low sintering temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1729-1731
• /
• 1999

The effect of Na on the structural and electrical properties of CIGS films were studied and their effects on the CIGS/Mo thin film solar cells were investigated. Soda-lime glass and Corning glass were used as substrates to compare the effect of Na diffusion into CIGS film. The resistivity of CIGS films was not changed in the Cu-poor region due to diffusion of Na from soda-lime glass but was mainly determined by the surface resitivity controlled by excess Na.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.16-18
• /
• 2009

CIGS 박막태양전지는 박막태양전지 중 최고 효율(20%)을 보이는 태양전지로 각광받고 있다. 이러한 고효율 태양전지는 Soda-lime glass 를 기판으로 사용한 경우로 기판과 CIGS층의 열팽창계수가 비슷하고 또 나트륨이 CIGS 성장시 확산하여 광흡수층에 유익한 영향을 준다고 알려져 있다. 본 실험에서는 나트륨이 함유된 소다라임유리와 거의 포함하고 있지 않은 코닝유리를 기판으로 사용하여 CIGS 광흡수층의 차이를 분석하였다. SIMS, SEM분석결과 소다라임유리의 CIGS Mo 부근과 표면부위에 Na 농도가 높으며, grain 크기가 코닝에 비해 작음을 알 수 있었다. 전기적 특성은 소다라임유리기판의 경우 p-type 농도가 코닝유리기판에 비해 약 $10^5{\sim}10^6$천배가량 높음을 확인하였다. 셀특성또한 코닝 11%, SLG는 16%로 효율차이가 발생하였으며 이는 나트륨으로 p-type 전도도가 향상되어 효율이 개선되는 것으로 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.66-66
• /
• 2008

Most of the properties of ITO films depend on their substrate nature, deposition techniques and ITO film composition. For the display panel application, it is normally deposited on the glass substrate which has high strain point (>575 degree) and must be deposited at a temperature higher than $250^{\circ}C$ and then annealed at a temperature higher than $300^{\circ}C$ in order to high optical transmittance in the visible region, low reactivity and chemical duration. But the high strain point glass (HSPG) used as FPDs is blocking popularization of large sizes FPDs because it is more expensive than a soda lime glass (SLG). If the SLG could be used as substrate for FPDs, then diffusion of Na ion from the substrate occurs into the ITO films during annealing or heat treatment on manufacturing process and it affects the properties. Therefore proper care should be followed to minimize Na ion diffusion. In this study, we investigate the electrical, optical and structural properties of ITO films deposited on the SLG and the Asahi glass(PD200) substrate by rf magnetron sputtering using a ceramic target ($In_2O_3:SnO_2$, 90:10wt.%). These films were annealed in $N_2$ and air atmosphere at $400^{\circ}C$ for 20min, 1hr, and 2hrs. ITO films deposited on the SLG show a high electrical resistivity and structural defect as compared with those deposited on the PD200 due to the Na ion from the SLG on diffuse to the ITO film by annealing. However these properties can be improved by introducing a barrier layer of $SiO_2$ or $Al_2O_3$ between ITO film and the SLG substrate. The characteristics of films were examined by the 4-point probe, FE-SEM, UV-VIS spectrometer, and X-ray diffraction. SIMS analysis confirmed that barrier layer inhibited Na ion diffusion from the SLG.

• Composites Research
• /
• 제22권4호
• /
• pp.33-40
• /
• 2009

유리섬유/에폭시 복합재료로 피막한 판유리의 표변파괴거동에 대한 섬유방향효과를 미소강구 충격실험을 통해 연구했다. 본 연구에서는 단순소다유리판(soda-lime glass plates), 일방향 유리섬유/에폭시박막 (glass/epoxy lamina ply)을 1층 및 2층 접착, 직교형 유리섬유/에폭시 박막 (2층)을 접착한 4종류의 시편을 사용하였다. 유리판 배면에 스트레인게이지를 부착하여 충격중의 최대 응력과 흡수파괴에너지를 측정하였다. 피막없는 판유리의 경우 충격속도 증가에 따라 링균열, 콘균열, 레이디얼 균열이 충격표면부에서 발생하였다. 복합재료 박막으로 피막한 결과, 소다유리판의 균열은 현저히 감소하였으며 섬유층과 판유리사이의 박리 및 소성변형영역의 방향은 섬유방향으로 진행했다. 최대응력과 흡수파괴에너지를 이용하여 구한 충격 표면파괴지수는 표면저항의 효과적인 평가지수로서 사용될 수 있었다.